9mm 147 gr molds?

[Balta]

I have the Lyman Lyman 356637 and the NOE 358 135Gr. I find both of them to be far more accurate than I am. The Lyman casts close to 154gr consistently and the NOE about 137gr. Both are with WW. The Lyman has a bevel base which makes lubing interesting.
I load both over 4.0gr of WSF. My Sig 226 is not overly fussy about OAL so I usually aim for 1.10".

Either would be a good choice and work great.

Yep but for NOE 358 135Gr. COL 1,10 is max you can do ,or you will have lube grove outside case

[Sgtonory]

Might want to think about using a Lee 6 cavity 357 158 gr RN .. That's what I do
3.2 grs of Bulleye and I have a great subsonic rd to shoot out of a FA UZI or a Sig P250
just a Thought

Have any issue with it swageing down the bullet? I had no luck getting same load to stabalize out of my 9mm Hi-point 995. Cases keep swaging down to .355 and need at least .357. Thanks

[treadwm]

Yep but for NOE 358 135Gr. COL 1,10 is max you can do ,or you will have lube grove outside case

Never noticed or thought about that. I'll have to check next time I load those.
Only time I go over 1.10 anymore is with 147gr.