This boolit started out as a lee 312-155 copy. But after much talk and tire kicking we where able to get Ed Harris to help out with the design and actualy get the lee version back to his original design. He likes the design so much he is buying one. This is what the lee mold was supposed to be before thy changed it. It was designed as a AK47 and SKS boolit but will work good in lots of other 30 cals as well. The other AMAZING thing is that this is a 6 cav mold in a 3" long block.
This is an aluminum 7075-T6 mold with a .1875 thick sprue plate and the block is 1.375 x 1.375 x 3.00.
The sprue plate is Hot blued and the locating pins and bushing are hardened and precision ground. Pins are selected after bushing are pressed into the blocks to insure perfect fit. The stop pin is the same screw/sleeve that the pivot uses. This allows the sprue plate to be flipped around if needed. The stop screw can be adjusted down to where it holds the sprue plate from lifting up.
"I will take one"
All standard buying applies, if you want it then say "I will take one" HERE on the forum, you will then be added to the list. The molds are first come first served, your position on the list is not locked in till we receive payment or confirmation of a shipped money order. If payment is not sent within 48hrs of you posting a "I will take one" then you might forfeit your spot to someone else waiting to pay and moved down the list.
If you pay and are not on the list here, and all the molds are sold then you will be bumped onto the next run. But PLEASE don't pay unless you have spoke up here first. Also if you pay and don't include a shipping address you can be moved down the list with a chance of being moved to the next run. I understand that people send money orders and that will be treated differently just let me know how your paying and we will make sure you get your mold. We are trying to do one shipment of all the molds within a week of posting this. I have so much to do I cant be running to the post office every day.
Delevery date:
We have currently ordered the tooling to cut this mold and will be starting production in around a week after we finish a run of 223 molds. We have a very quick turnaround time and would most likely be ready to ship in a few weeks.
Payment:
Preferred payment is ether over the phone or by PayPal, but you can pay by money order if needed but shipping date will not be held till it arrives. If you pay using PayPal its your responsibility to cover the fees which seams to be about 3%. Also PLEASE!!! include your address, forum name and what mold your buying, put it in the notes section on paypal or on a paper with your money order. If you cant put it with paypal then send it to me in a PM. PayPal does not always give me your address and I don't have time to try and track it down when I'm boxing up molds. If we are missing an address when shipping day comes I will send you a pm asking for it, if your able to get it to me before we ship then your mold might be shipped with the rest if we can. If not then it will be shipped when we get to the post office again. If calling us over the phone, It might take a few tries as we are a gun store and only have one line. Thank you - JT
the development of this boolit and mold is located here
The price for this run will be $125.00 + $5.80 shipping (flat rate box usps),
$19.95 to Canada and $23.95 to all other countries
first come first serve
All the .325 are spoken for
Customer list:
1: Ed Harris .312, paid PO
2: Ed Harris .312, paid PO
3: Ed Harris .312, paid PO
4: Ed Harris .312, paid PO
5: garym1a2 .312, paid PP
6: crawfobj .312, paid PP
7: Adk Mike .312, paid PO
8: rockrat .312, paid CK
9: rollmyown .316, paid PP
10: ballistim .312, paid PP
11: doctorggg .312, paid PP
12: NYBushBro .312, Paid MO
13: GlocksareGood .312, paid PP
14: A pause for the COZ .312, paid PO
15: lonewelder .312, paid PP
16: Hamish .325, paid PP
17: TreeKiller .316, paid PO
18: mikeym1a .312 paid PP
19: mikeym1a .316 paid PP
20: mikeym1a .325
21: Janoosh .312
22: 2wheelDuke .312
23: Coltman .312, paid MO
24: 2thepoint .312
25: Stephen Cuccio .312, paid PO
26: Stephen Cuccio .312, paid PO
27: btreanor .312, paid PP
28: btreanor .316, paid PP
29: missionary5155 .312, paid PP
30: DanM .312, paid PO
31: shangrila .312, paid PP
32: autodidact .312, paid PP
33: mookiie .312, PP
34: pascalp .312, paid PP
35: casca .312
36: sranch .312
37: Glenn R. Latham .312, paid PO
38: Dale in Louisiana .312, paid PP
39: Dale in Louisiana .316, paid PP
40: ddeaton .312, paid PO
41: ddeaton .316, paid PO
42: Tire .312
43: grrifles .312, paid PO
44: Fishman .312, paid PP
45: Fishman .316, paid PP
46: Fishman .325, paid PP
47: mookiie .325, paid PP
48: swiss 96/11 .312, paid PP
49: swiss 96/11 .316, paid PP
50: castblast .316, paid PO
51: PB234 .312, paid PP
52: hporter .312, paid PP
53: 41wyom .312, paid CK
54: badgeredd .312, paid PP
55: badgeredd .325, paid PP
56: Bowen67 .312, paid PO
57: Dutch4122 .312
58: finishman2000, paid .312
59: blackknight, paid PP, .316
60: Alex Patino, paid .312
All the molds have been shipped
|
   
   
|
|
Reply With Quote
