Load DataInline FabricationWidenersMidSouth Shooters Supply
RotoMetals2Lee PrecisionReloading EverythingRepackbox
Titan Reloading
Results 1 to 8 of 8

Thread: hardness of range lead

  1. #1
    Boolit Buddy
    Join Date
    Jan 2013
    Location
    Alberta
    Posts
    232

    hardness of range lead

    I use recovered shotgun slugs as a source for pure lead
    but what about pistol bullets?
    How hard are jacketed cores in the common cals,
    and are wadcutters the same?
    If this is already on the site please point me in the right direction.

  2. #2
    Boolit Grand Master
    btroj's Avatar
    Join Date
    May 2006
    Location
    Nebraska's oldest city
    Posts
    12,418
    I just melt it all together. Mine goes 11 or 12 BHn air cooled and 14 to 16 water dropped.

    It makes a nice bullet for hunting....

  3. #3
    Boolit Buddy
    Join Date
    Jun 2011
    Location
    Northwest Montana
    Posts
    487
    All of the range scrap that I have is from jacketed, and comes in at 12 to 15 bhn. There is definitely some antimony in it.

    Shad
    I believe in gold, silver, & lead, and the rights of free honest men... You can keep the "CHANGE"!

    Shad

  4. #4
    Boolit Master Any Cal.'s Avatar
    Join Date
    Dec 2011
    Posts
    580
    My range scrap water drops pretty hard, but there is quite a bit of commercial cast in it. With mostly jacketed cores you probably won't get much.

  5. #5
    Boolit Master


    Join Date
    Oct 2010
    Location
    Franklin, TN
    Posts
    1,629
    I just received the results from some range lead I had analyzed yesterday. It was 1.2% antimony, 97.33% lead, and .862% copper. The copper was a surprise and the absence of tin was another. This is pretty soft and I'm thinking the best use would be for 45 acp or 38 special bullets. I would want to "sweeten" it for anything faster or with more pressure. This was a sample of the range scrap from Ft. Hood being sold on this site in the swapping and sellin' section. I'm certain different batches of range scrap would test differently.
    Take care,
    Rick

  6. #6
    Boolit Master

    Kraschenbirn's Avatar
    Join Date
    Dec 2006
    Location
    East Central IL
    Posts
    3,448
    Quote Originally Posted by samwithacolt View Post
    I use recovered shotgun slugs as a source for pure lead
    but what about pistol bullets?
    How hard are jacketed cores in the common cals,
    and are wadcutters the same?
    If this is already on the site please point me in the right direction.
    Like btroj, overall the range lead I recover from our club's pistol line runs around 11-12 BHn, air-cooled, after fluxing and skimming off the trash.

    At one time, out of curiousity, I smelted down a few pounds of jacketed stuff and found the cores to be pretty close to pure lead for hardness.

    Wadcutters, though, can vary considerably. Swaged WCs are almost always pure lead but cast can be anything from 'range scrap' hardness to COWW+. 10-15 years ago, a shooting buddy owned one of the largest (sales volume) cast boolit companies in the U.S. and they used the same 'enriched' #2 alloy for their cast wadcutters as for their Keith SWCs.

    Bill
    "I'm not often right but I've never been wrong."

    Jimmy Buffett
    "Scarlet Begonias"

  7. #7
    Boolit Buddy
    Join Date
    Jan 2013
    Location
    Alberta
    Posts
    232
    I was wondering if recovered pistol bullets would be sift enough
    for my .38-55 at 11-1200 fps. Maybe 50/50 with pure lead and
    throw in some sodder.

  8. #8
    Boolit Master

    Kraschenbirn's Avatar
    Join Date
    Dec 2006
    Location
    East Central IL
    Posts
    3,448
    Smokeless or BP? I use straight range scrap, with just a touch of tin added, when casting .38-55 boolits for smokeless loads in my .38-55 Highwall but those don't shoot for c**p with BP.

    Bill
    "I'm not often right but I've never been wrong."

    Jimmy Buffett
    "Scarlet Begonias"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check