simple Hi-Tek coating

[glockfan]

although some small home based bullet makers have got one or two.

.

which exactly match my needs for now.

if ever the start up grow up into a sailing business,at one point an automated resizer is a no brainer. it becomes a '''need'' .

i like the gatling feeder system.

[Ausglock]

Looks pretty good Tazza.
Trevor, what do you call yours, Frankenfeeder?

I call mine, Herman.
after Herman Munster

[Tazza]

I always find it hard to come up with names, i call my welder mr sparky for obvious reasons, the plasma cutter mr burns because every time i use it, i get burnt......

[Avenger442]

My Dad's profession was a welder. Pipe for local gas company for the most part. Even he got burned occasionally. And I am like you. Burned somewhere almost every time.

Grem
If I buy one of the AS/2, with the RM and the GM in the group buy is the shipping $234 US? Or is the shipping reduced if all bought together?

[Gremlin460]

no shipping on the RM as it fits inside one of the other boxes, group freight has never really worked out or been worth it as the all go to different destinations. Remember this is air freight so goes on weight not on box size so much. I dont send via Malaysia Airways either.

[Ausglock]

I got an email saying that HATCH posted that "this thread is not on topic"
I can't see the post or he deleted it.
But.... All I can say is..... On Topic??????.... HAHAHAHAHAHAHAHAHAHAHAHA.... 99% of this thread is not on topic.
Thread hijacking is an artform...

[Gremlin460]

Hatch is right, my bad. There is another thread for this here:-
http://castboolits.gunloads.com/show...t-Mod-for-AS-2

So lets get back to talking about the problems coating with Hi-Tek. I cant contribute sorry because I have zero issues with coating. leading, flaking, so I have nothing to add.
I do know it dont taste nice.

[HI-TEK]

Today, it was a sight to behold. Today, I set fire to retention stock of previous batches, Liquid and powder.
I estimated that we burned about 250 litres assorted coloured liquid,
and about 100 kilos of various powdered coatings. You should have seen the beautiful colours in the flame.
I was dancing around the flames but had no marshmallows to toast.
You should have seen all the colours of the Rainbow in the flames. It was magic.
I though it was psychedelic experience. Or was it that I may have been affected by the fumes. LOL LOL

[Ausglock]

I might have to get a slab of Canadian Club and burn all the coating samples I have here too.
get drunk and watch the fire..

[glockfan]

Today, it was a sight to behold. Today, I set fire to retention stock of previous batches, Liquid and powder.
I estimated that we burned about 250 litres assorted coloured liquid,
and about 100 kilos of various powdered coatings. You should have seen the beautiful colours in the flame.
I was dancing around the flames but had no marshmallows to toast.
You should have seen all the colours of the Rainbow in the flames. It was magic.
I though it was psychedelic experience. Or was it that I may have been affected by the fumes. LOL LOL

were they '''expired''' materials?

[perminator]

Is there any difference In using mek instead of acetone such as a smoother finish?

Sent from my SAMSUNG-SM-G890A using Tapatalk

[Grmps]

MEK evaporates slower than acetone and is good for use in the summer when it's hot. (If you don't coat the boolits completely or over tumble the boolits you will get a rough coating).

[Ausglock]

I use both MEK and Acetone. No difference to the finish.

[glockfan]

MEK evaporates slower than acetone and is good for use in the summer when it's hot. (If you don't coat the boolits completely or over tumble the boolits you will get a rough coating).

i'm tempted by mek. i don't have a problem with acetone,but you must act very fast before it goes thick, the key being exactly getting the coverage done before the sound change for a muffled sound ,which gives a rough finish, and ultimately may turn in the peeling of the product. the interesting point with mek is you can swirl till the coverage is complete without risk of a complete evaporation of the product.

[Ausglock]

Or.... just add a few Mls of Metho to the acetone to slow down the flashoff..

[Grmps]

Or you can add up to 20% denatured alcohol here in the States to slow down flash off

[glockfan]

Or.... just add a few Mls of Metho to the acetone to slow down the flashoff..

Trevor...a little more about it...

first, what is metho?...sorry,i'm a noob lol

[dansedgli]

Fresh 122 flat points out of my new master caster. Zombie green. Apparently they are accurate. Here's hoping.

[Ausglock]

Trevor...a little more about it...

first, what is metho?...sorry,i'm a noob lol

de-natured Alcohol is Metho. Metho is very popular with the Alcos when mixed with Orange juice.

[sureYnot]

de-natured Alcohol is Metho. Metho is very popular with the Alcos when mixed with Orange juice.

Methanol will kill you... After it makes you blind. Ethanol is the stuff that's good with juice.

Sent from my XT1710-02 using Tapatalk