I always find it hard to come up with names, i call my welder mr sparky for obvious reasons, the plasma cutter mr burns because every time i use it, i get burnt......
My Dad's profession was a welder. Pipe for local gas company for the most part. Even he got burned occasionally. And I am like you. Burned somewhere almost every time.
Grem
If I buy one of the AS/2, with the RM and the GM in the group buy is the shipping $234 US? Or is the shipping reduced if all bought together?
Last edited by Avenger442; 07-03-2018 at 12:46 PM.
While I work at it, it is by God's grace that it happens. So it is best I ask him what, how and when before I start..
no shipping on the RM as it fits inside one of the other boxes, group freight has never really worked out or been worth it as the all go to different destinations. Remember this is air freight so goes on weight not on box size so much. I dont send via Malaysia Airways either.
Don't worry about life, no-one gets out alive.
I got an email saying that HATCH posted that "this thread is not on topic"
I can't see the post or he deleted it.
But.... All I can say is..... On Topic??????.... HAHAHAHAHAHAHAHAHAHAHAHA.... 99% of this thread is not on topic.
Thread hijacking is an artform...
Hooroo.
Regards, Trevor.
Australia
Hatch is right, my bad. There is another thread for this here:-
http://castboolits.gunloads.com/show...t-Mod-for-AS-2
So lets get back to talking about the problems coating with Hi-Tek. I cant contribute sorry because I have zero issues with coating. leading, flaking, so I have nothing to add.
I do know it dont taste nice.
Don't worry about life, no-one gets out alive.
Today, it was a sight to behold. Today, I set fire to retention stock of previous batches, Liquid and powder.
I estimated that we burned about 250 litres assorted coloured liquid,
and about 100 kilos of various powdered coatings. You should have seen the beautiful colours in the flame.
I was dancing around the flames but had no marshmallows to toast.
You should have seen all the colours of the Rainbow in the flames. It was magic.
I though it was psychedelic experience. Or was it that I may have been affected by the fumes. LOL LOL
I might have to get a slab of Canadian Club and burn all the coating samples I have here too.
get drunk and watch the fire..
Hooroo.
Regards, Trevor.
Australia
Is there any difference In using mek instead of acetone such as a smoother finish?
Sent from my SAMSUNG-SM-G890A using Tapatalk
MEK evaporates slower than acetone and is good for use in the summer when it's hot. (If you don't coat the boolits completely or over tumble the boolits you will get a rough coating).
I use both MEK and Acetone. No difference to the finish.
Hooroo.
Regards, Trevor.
Australia
i'm tempted by mek. i don't have a problem with acetone,but you must act very fast before it goes thick, the key being exactly getting the coverage done before the sound change for a muffled sound ,which gives a rough finish, and ultimately may turn in the peeling of the product. the interesting point with mek is you can swirl till the coverage is complete without risk of a complete evaporation of the product.
Or.... just add a few Mls of Metho to the acetone to slow down the flashoff..
Hooroo.
Regards, Trevor.
Australia
Or you can add up to 20% denatured alcohol here in the States to slow down flash off
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |