5744 for the 03A3 and M39

[hylander]

Anyone use this powder for these cartridges ?
I just loaded up 25.0 and 25.5 under the Lee 312-185 for the 03A3 but won't get
a chance to try them until next weekend.
Also plan to try it under the 312299 for the 03A3 and the M39

[tomme boy]

I like it in the Russian. Usually end up close to 21 gr.

[HARRYMPOPE]

that one in the 7.62 x 54 and '06 hold many of the national records in the CBA Military Matches.Top choice!

George

[DrtRacr09]

Am using same bullet with around 23Gr. for a little over 1700 fps in an A3 2 groove. I have some loaded under an NOE 314299 for an '03 but like you will not get them out till next weekend.

[uscra112]

Excellent as long as you don't try to make "reduced loads". Then it starts to leave half-burned kernels in the bore and chamber. A favorite of mine for many years. I use it in Krag and 7.5x55, and have used it in .35 Remington.

[leadman]

I have used it but found that SR4759 does the same thing at usually at least $3 per pound cheaper.

[edwin41]

i am shooting this powder in my 6.5x55 mm swedisch mauser rifle.
im using 19.5 gr and a paperpatched 140 gr loverin style casted bullet , and casted real soft, about ten bhn.
the powder here in holland is called lovex d060 by the way , same powder, different name.

[lotech]

I use 5744 and #314299 (ww alloy sized to .310") in a Springfield. Bullet weight is 205 grs. with gas check. MV is 1660 with 21 grs. A couple of loads that are slightly slower and almost as accurate are 19 grs. SR4759 & 21 grs. IMR4198.

[hylander]

Well the 25.0 did not well, over 2" at 50yds
The 25.5 did 1" @ 50yds.

[GH1]

I use it in my 45-70, works like a charm.
GH1