MiHec 454-308-Keith two or four cavity HP or solid

[45 2.1]

when is this mold going to be cut?

I don't know. Some PMs to MiHec would probably help push it along.

Thread updated..........

[jrayborn]

Done!

[Dirtdgger]

I've set on the fence long enough. I'll take a 2 cavity with small pins and blank pins.
Dirtdgger3355atyahoodotcom

[jrayborn]

I'd like to change my order to the 4 cavity with cup H/P.

Hope there is still a chance on this buy?

[alha]

One 4 cavity Cramer mold with all pins and One 4 cavity solid mold with all pins

snowserver (a*t) hotmail DOT com

[Luis R]

Howdy,

I would like to sign up for a 2 cavity plain base mold with penta HP and blank pin sets. M40A1 at sbc global dot net. Thanks.

Semper Fi,

Luis R.

[alha]

I'd like one four cavity cramer with all pins and one 4 cavity solid

snowserver (at) hotmaildotcom

[S.B.]

I'm kinda addicted to diamentions with a drawing, any chance you could post this?
Steve

[bdicki]

I would like to sign up for a 2 cavity plain base mold with penta HP and blank pin sets. brucedotdickinsonatglvdotcom

[JWNathan]

I'd like a two cavity with large HP pins.
gettin_greasy (at) yahoo (dot com)

[gussiegoins2]

I am #24 on the list. I would like to change from a two cavity with large HP pins and a blank set of pins to a four cavity with large HP pins and penta HP pins. gussiegoins2 at gmail dot com

[gussiegoins2]

Does anyone know whether this bullet is too long to cycle in a Rossi 92 in 45 Colt if you crimp in the crimp groove?

[just10mm]

I would like a 4 cavity HP Mold with penta pins and solids... Thanks

just10mm at gmail dot com

[jroc]

I'm in I need a 4 cavity solid. jroc3099atyah00dotc0m

[Mohillbilly]

I have the catshooter and would like a 4 cav. with a 4 pin option , don't need the blank pin .. curleyqlink at hotmail dot com

[tenncanshooter]

Would like the 2 cavity cramer with all pins.
tnncan (at) gmail (dot) com

[GMT210]

Any possiblity of opening the diameter up to .459-.460 as an option for a 45-70 application?

[mofugly13]

mofugly13 at aol dotcom

1 two cavity cramer with small HP pins please

[oldironsaws]

I'll take:1 two cavity cramer HP mold, with the blank pins and the small hollow point 301 grain pins. Thanks! fjsheen263[at]gmail[dot]com

[45 2.1]

I'm kinda addicted to diamentions with a drawing, any chance you could post this? Steve

Sorry, I don't do that. All the pertinent dimensions are in the first post.

Does anyone know whether this bullet is too long to cycle in a Rossi 92 in 45 Colt if you crimp in the crimp groove?

The meplat to crimp distance is in the first post. Maybe someone who has both can chime in.

Any possiblity of opening the diameter up to .459-.460 as an option for a 45-70 application?

You would have to see if MiHec would do that for you. PM him....

I'll take:1 two cavity cramer HP mold, with the extra pin set.

There are 5 pins available. You will have to tell me which one(s) you want.

Thread updated..................