MiHec 9mm 125 gr. four cavity HP or four cavity solid - 6th rerun

[Poohgyrr]

Please sign me up for a four cavity hp 0.359" diameter with the penta pins.

bhpdvcm24 AT sbcglobal DOT net

and thanks

[Sgtonory]

Count me in for .359 4 cavity
Onory1 @t gmail dot com

[aap2]

I'll take one in .359 with all pins 4 cavity brass

farmcat999 (at) yahoo (dot) com

thanks

[RangerNick]

Oops-.359"

[daengmei]

1 mold, .359 HP with all pins plus handles.
daengmei.....maengdei at Hotmail dot com

[LowPE]

I will take one, 357 diameter, 4 cavity HP, penta pins

email is cylserv at live dot com

[Sgtonory]

Im 27 on the list can i change it to HP with pins for solid and penta HP. Thanks

[jimgun]

count me in for a 4 cavity .359 with all pins. thanks jimgun jgruver2013 at gmail dot com

[bxchef29]

would this also work for 38/357?

[Buzz64]

Sized to .358 it should be fine. Someone lucky enough to have one already needs to chime in on accuracy but suspect it will be fine.

[quantumfuzz]

If my primary use will be 9mm boolits, am i better off with the .357 or does the .359 give me more flexibility?

[wool1]

I'd like one.... - 0.359 diameter, 4 cavity penta and blank pins


wwoolson68 (at) gmail (dot) com

[Buzz64]

If my primary use will be 9mm boolits, am i better off with the .357 or does the .359 give me more flexibility?

With a .359 drop size you can size 'down' using a luber-sizer to at least a .356 so, yes, you have more flexibility. Some 9mm like .356 - most like .357 or .358
YMMV

[gtgeorge]

Please sign me up for 1 4 cavity .359 with all pins. gspatton at gttransmissions dot com

[45 2.1]

would this also work for 38/357?

Some folks are already using it that way.

If my primary use will be 9mm boolits, am i better off with the .357 or does the .359 give me more flexibility?

The 0.359" would give more flexibility... 9mms vary quite a bit in groove diameter.

Thread updated...........

[Missoulaz28]

i'm in for a .359 penta pin missoulaz28 (at) msn (dot) com

had to back out on the last buy, hopefully money will be available when this one comes up for production.

[bxchef29]

I'm also in for 1 .359 HP with all pin options and a set of handles. email is bxchef29@yahoo.com thanks

[shaggybull]

Please sign me up for 1 four cavity cramer .359 with all pins options and a set of handles, my handle and email is:
shaggybull.........bottleneckranch@yahoo.com...... ..

thanks

[farmbif]

Is the weight 125gr as a HP or as a solid point? and is a top punch included with this one?

[45 2.1]

Is the weight 125gr as a HP or as a solid point? and is a top punch included with this one?

HP and all MP molds have a top punch included that I've seen.