You can use a single stage reloading press. I wouldn't tie up a turret for this.
I use a Lee Reloader, the smallest press they make. It works well for me. I did have to reverse the loading ram but that isn't difficult.
Common sense Gun Safety . . .
Is taught at the Range!
C-H,
Not picking on you, and the problem could be entirely my error, but something is terribly a miss with that picture.
We've never have to glue on standard shank checks with my dies but certainly not PB checks.
Either I sent you the wrong dies or something else is happening. PB checks as stated above swage into your base. No way to glue them on...!
If anyone has trouble of any kind with my dies, shoot me an email. We will get to the issue at hand and correct it.
Last edited by PatMarlin; 04-09-2018 at 11:11 AM.
...and more from 2013.
There has been a lot of lost information confusing new casters using PB gas checks by questions I receive, so I think this (older CB) thread and a couple others I resurrected will help explain more on using PB checks.
There is so much info here at CB from the master cast shooters, down deep in the data base and it would be great to read some of the great knowledge left- by even members that have passed on such as "Felix".
Last edited by PatMarlin; 04-09-2018 at 11:10 AM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |