MidSouth Shooters SupplyWidenersRotoMetals2Lee Precision
Load DataSnyders JerkyRepackboxReloading Everything
Inline Fabrication Titan Reloading
Page 1 of 20 1234567891011 ... LastLast
Results 1 to 20 of 400

Thread: 10mm / 40s&w, 170gr / 150gr (135gr HP), WFN, 4-cav, Brass, Miha

  1. #1
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625

    10mm / 40s&w, 170gr / 150gr (135gr HP), WFN, 4-cav, Brass, Miha

    THIS GROUP BUY IS NOW CLOSED.
    Invoices have been sent out. (7/1/2014)


    This mold will be offered cut to full .543" depth for a 170gr WFN / 164gr & 155gr HP, or cut to .483" depth for a 150gr WFN / 144gr & 135gr HP.
    NO MIX AND MATCH IN THE SAME MOLD BLOCK!

    All molds come with all three pin sets. There are two hollow point pin sets and blank pins for casting solids. The "Penta" pins will remove ≈6gr from the solid boolit, the round pins will remove 15gr from the solid boolit. So if you buy a mold cut for a 150gr WFN and use the round pins you'll get 135gr HP boolits.


    Options: (Prices pending confirmation by Miha)
    1. Mold cut for 170gr WFN €118 shipped (Approx. $165)
    2. Mold cut for 150gr WFN €118 shipped (Approx. $165)


    Miha will contact you at the email address listed next to your name on the list below when he is ready for payment / delivery.

    Here's the participation list:

    1.) Oreo - 1, jdecar1 at hotmail dot com
    2.) Oreo - 1, jdecar1 at hotmail dot com
    3.) Oreo - 2, jdecar1 at hotmail dot com
    4.) Oreo - 2, jdecar1 at hotmail dot com
    5.) Henryman - 1, kevin dot gehlhausen at twc dot com
    6.) bcr - 1, brichards at optics dot arizona dot edu
    7.) shotstring - 1, vickandbob at frontier dot com
    8.) RED333 - 2, jefhover at tds dot net
    9.) harley45 - 2, eric at whitetigerblog dot com
    10.) Poohgyrr - 1, bhpdvcm24 at sbcglobal dot net
    11.) BattleRife - 1, garysname at hotmail dot com
    12.) wool - 1, wwoolson68 at gmail dot com
    13.) phil3333 - 1, hmap33 at aol dot com
    14.) paborn - 1, kencolamarino at hotmail dot com
    15.) PbHurler - 1, denneyr at sbcglobal dot net
    16.) PbHurler - 2, denneyr at sbcglobal dot net
    17.) Nabind - 1, Drs dot 1964 at yahoo dot com
    18.) Nabind - 2, Drs dot 1964 at yahoo dot com
    19.) LabGuy - 1, LCEL at hotmail dot com
    20.) LabGuy - 2, LCEL at hotmail dot com
    21.) Paulinski - 1, pkrysztofiak at gmail dot com
    22.) lup - 1, Rstaab at panix dot com
    23.) timberhawk - 1, grbusby at tx dot rr dot com
    24.) Smith 58 - 1, nawebste at iupui dot edu
    25.) Smith 58 - 2, nawebste at iupui dot edu
    26.) PSGCLTS - 1, bwongpd at aol dot com
    27.) Harter66 - 2, hartr66 at yahoo dot com
    28.) castreloading - 1, pb90sb5sn5slinger at hotmail dot com
    29.) h1tdk00 - 2, tkunz500 at att dot net
    30.) Ozarklongshot - 1, Stoneaxe42 at yahoo dot com
    31.) Ozarklongshot - 2, Stoneaxe42 at yahoo dot com
    32.) Polish Jeff - 1, jacukrowicz at gmail dot com
    33.) B.C.Jay - 2, cjsahlstrom at telus dot net
    34.) Stick_man - 2, jstick dash man at live dott com
    35.) SP5315 - 2, wmclark at email dot com
    36.) mouldernt - 1, mouldernt at gmail dot com
    37.) armedmoose - 1, gesper at gmail dot com
    38.) SteveUSP - 1, steve dot anderson444 at gmail dot com
    39.) txdoc - 1, rrussell at gmail dot com
    40.) M99SavNut - 1, tex(number3)rd at hctc dot net
    41.) M99SavNut - 2, tex(number3)rd at hctc dot net
    42.) Jeff_WNY - 1, castboolits at lockport dot net
    43.) Jeff_WNY - 2, castboolits at lockport dot net
    44.) hotwheelz - 1, willsfxsts at gmail dot com
    45.) hotwheelz - 2, willsfxsts at gmail dot com
    46.) happie2shoot - 1, happie2shoot at yahoo dot com
    47.) thumper,eh? - 2, pky375 at gmail dot com
    48.) rusfiredfd - 1, rusfiredfd at gmail dot com
    49.) gtgeorge - 1, gspatton at gttransmissions dot com
    50.) gtgeorge - 2, gspatton at gttransmissions dot com
    51.) dverna - 1, dverna001 at aol dot com
    52.) YunGun - 1, ericbridges at hotmail dot com
    53.) lonewelder - 1, lonewelder at msn dot com
    54.) lonewelder - 1, lonewelder at msn dot com
    55.) Sig - 1, needs2fish at optimum dot net
    56.) doctorggg - 1, gggmmg at verizon dot net
    57.) doctorggg - 2, gggmmg at verizon dot net
    58.) Digger - 2, awhitesides at frontier dot com
    59.) TXSlade - 1, andrew dot wilson33 at gmail dot com
    60.) TXSlade - 2, andrew dot wilson33 at gmail dot com
    61.) farmbif - 1, farmbif at aol dot com
    62.) newshooter - 1, skidoorider4 at yahoo dot com
    63.) alha - 1, snowserver at hotmail dot com
    64.) alha - 2, snowserver at hotmail dot com
    65.) ocelli - 1, Jaydeescot at yahoo dot com
    66.) Stevtrains - 2, Stevtrains at aol com
    67.) sirAIG - 1, siraig at gmail dot com
    68.) sirAIG - 2, siraig at gmail dot com
    69.) rhadamanthos12 - 1, kamisama12 at gmail dot com
    70.) jimmya - 1, jimmyma at comcast dot net
    71.) Dubbel El - 1, handles, laynel at bigfoot dot com
    72.) pergoman - 2, djhoran at comcast dot net
    73.) jwfox - 1, jwfox9480 at aol dot com
    74.) jwfox - 2, jwfox9480 at aol dot com
    75.) coog83 - 1, kpatton at take2 dot us
    76.) coog83 - 2, kpatton at take2 dot us
    77.) Buzz64 - 2, buzz at joniypc dot com
    78.) uaskme - 2, Pardue10 at comcast dot net
    79.) Standardgewehr - 1, handles, Standardgewehr at gmail dot com
    80.) Bruizer - 1, handles, b.rolfe1 at bellaliant dot net
    81.) LongGun1 - 2, handles, backuppowerconsult10 at gmail dot com
    82.) LongGun1 - 2, handles, backuppowerconsult10 at gmail dot com
    83.) ben lurkin - 1, sddnhad at msn dot com
    84.) ben lurkin - 2, sddnhad at msn dot com
    85.) mold maker - 1, alicejerry at charter dot net
    86.) mold maker - 2, alicejerry at charter dot net
    87.) TMSCU - 1, Tmoyer1952 at yahoo dot com
    88.) NHPaul - 2, paulmarquis at mac dot com
    89.) remy3424 - 1, scottr at frontiernet dot net
    90.) MTtimberline - 1, mtpete79 at hotmail dot com
    91.) Guardian - 1, spicket80 at hotmail dot com
    92.) Guardian - 2, spicket80 at hotmail dot com
    93.) AZBrian - 1, sellsell at cox dot net
    94.) AZBrian - 2, sellsell at cox dot net
    95.) Ole - 2, Ole1830 at yahoo dot com
    96.) Cast of Thousands - 1, ronaldrodina at sbc global dot net
    97.) Viagrow - 1, brian_tnd at hotmail dot com
    98.) mckenziedrums - 1, mckenziedrums at gmail dot com
    99.) mdxdm - 1, Steven.droid at gmail dot com
    100.) randoma - 1, cs at voltmail dot com
    101.) gatortommy - 1, iaretom at yahoo dot com
    102.) monkeywrench - 1, mhodshire at sbcglobal dot net
    103.) Dschuttig - 1, Dschuttig at yahoo dot com
    104.) bushog - 1, boo-haaa at hotmail dot com
    105.) bushog - 2, boo-haaa at hotmail dot com
    106.) nighthunter - 1, etmci at comcast dot net
    107.) Lonegun1894 - 1, Lonegun1894 at yahoo dot com
    108.) chprplt - 1, exit 13 five at aol dot com
    109.) fivegunner - 2, fivegunner at sbcglobal dot net
    110.) PB64 - 1, pw1340 at yahoo dot com
    111.) Aaron - 1, 5090shiloh at gmail dot com
    112.) Aaron - 2, 5090shiloh at gmail dot com
    113.) Captain_Howdy - 1, wumbarger1 at roadrunner dot com
    114.) DRNurse1 - 1, handles, DRNurse1 at hotmail dot com
    115.) pcarpenter - 1, paul at mail dot bradley dot edu
    116.) EverReady - 1, Johntburns at yahoo dot com
    117.) tayous1 - 1, nathancampbell at gmail dot com
    118.) ramhunter - 1, yukonmarco at gmail dot com
    119.) Blanco - 1, cnctooltek007 at yahoo dot com
    120.) cody9999 - 1, hefke s at yahoo dot com
    121.) Beau Cassidy - 1, orthonpbeau @ yahoo dot com
    122.) abqcaster - 1, pubadrian at hotmail dot com
    123.) Duffy - 1, grnmchn at msn dot com
    124.) Ironwood - 1, Ironwood of evergreen at yahoo dot com
    125.) AggieEE - 1, dale1 at idworld dot net
    126.) sewerman68 - 2, todd the plumberz at gmail dot com
    127.) TimGS - 1, timschardine at roadrunner dot com
    128.) jayjay1 - 1, nutella-addicted at web dot de
    129.) stranded1980 - 1, benjamin_strand at yahoo dot com
    130.) stranded1980 - 2, benjamin_strand at yahoo dot com

    Order Tally:
    No. 1 - 87
    No. 2 - 43

    Blueprint with -6gr "Penta" HP:


    "Penta" HP blueprint:


    Round hp blueprint:


    LINK TO THE DISCUSSION FORUM THREAD
    Last edited by Oreo; 07-05-2014 at 12:17 AM.

  2. #2
    Boolit Buddy
    Join Date
    Feb 2013
    Posts
    250
    in for both
    signupv2 at gmail.com

  3. #3
    Boolit Buddy


    Join Date
    Jun 2008
    Location
    East Troy, Wi.
    Posts
    297
    I am in for one. 170gr WFN / 164gr & 155gr HP
    t schmidt 1974 at g mail dot com

  4. #4
    Boolit Buddy
    wool1's Avatar
    Join Date
    Jan 2013
    Location
    West Central Illinois
    Posts
    105
    Any idea of delivery date? Sorry if I overlooked it

  5. #5
    Boolit Buddy
    Join Date
    Aug 2007
    Posts
    368
    Put me down for one 170 gr WFN
    Gosh, I haven't put myself down for a mold in so long I forgot what information you need.
    email is vickandbob at frontier dot com
    In these parts, often one's very life may depend on a mere scrap of information.

  6. #6
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Quote Originally Posted by wool1 View Post
    Any idea of delivery date? Sorry if I overlooked it
    None, but you can assume about a year from now. We don't yet have the 15 minimum to even be on Miha's schedule (although I'm sure that will soon be remedied.)

  7. #7
    Boolit Master




    RED333's Avatar
    Join Date
    Jul 2012
    Location
    3rd rock from the Sun, CDB land, TN
    Posts
    1,910
    Sign me up, please.
    Mold cut for 170gr WFN $156 shipped.
    jefhover at tds dot net
    Je suis Charlie
    ΔΕΞΑΙ
    Rednecks run the Brits out of this country years ago,
    I will defend this country from anyone or thing that tries to take it from me or mine
    I AM A REDNECK!!!
    "If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776

  8. #8
    Boolit Buddy
    Join Date
    Mar 2012
    Location
    Alberta
    Posts
    270
    Oreo, you should tell people if you prefer a public post saying "I'll take one" or a PM.
    ---------------------------------------------------------------------------
    --BattleRife

  9. #9
    Boolit Master
    Join Date
    Mar 2005
    Location
    Indiana
    Posts
    805
    Ill take a 150 grain with all the pins eric at whitetigerblog dot com
    See Some of My Holster Work Here:
    www.whitetigerleatherworks.com

  10. #10
    Boolit Buddy
    LabGuy's Avatar
    Join Date
    Sep 2010
    Location
    Tallahassee Florida
    Posts
    348
    Oreo, Did you get it worked out so the -10grain hollow points from the .40 S&W - 180 gr will fit in these?

  11. #11
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Quote Originally Posted by LabGuy View Post
    Oreo, Did you get it worked out so the -10grain hollow points from the .40 S&W - 180 gr will fit in these?
    I haven't asked yet. I will press for an answer once we get the 15 minimum qty. Miha can be a bit challenging to communicate with sometimes so I try to do so strategically. (Till then, IMO, it's a safe assumption that the pins will be cross-compatible. I will get a definitive answer though.)

    Quote Originally Posted by BattleRife View Post
    Oreo, you should tell people if you prefer a public post saying "I'll take one" or a PM.
    PMs will get answered but I much prefer you place your orders publicly. It keeps all the information in one place for me and for Miha.

  12. #12
    Boolit Master Poohgyrr's Avatar
    Join Date
    Mar 2006
    Location
    Retired to South Carolina for the grandkids!
    Posts
    543
    Please add me for one of option 1: 1. Mold cut for 170gr WFN $156 shipped

    bhpdvcm24 AT sbcglobal DOT net.

    Thanks
    John
    Winchester ‘92s & 94s


    “President JFK 20 Jan 1961: “the rights of man come not from the generosity of the state, but from the hand of God.”

    "Life brings us sorrow and joy alike. It is what a man does with them - not what they do to him - that is the test of his mettle." T. Roosevelt

  13. #13
    Boolit Buddy
    Join Date
    Mar 2012
    Location
    Alberta
    Posts
    270
    I will take a No. 1.
    garysname (at) hotmail.com
    ---------------------------------------------------------------------------
    --BattleRife

  14. #14
    Boolit Buddy
    wool1's Avatar
    Join Date
    Jan 2013
    Location
    West Central Illinois
    Posts
    105
    Put me down for a 170 gr.....

    wwoolson68 (at) gmail (dot) com

  15. #15
    Boolit Buddy
    Join Date
    Jun 2012
    Posts
    318
    I really want a 170. But I just wonder if in the 10mm being plain base will it hold up to the speeds it will hit. I want it for my ccu. And I figure the 170 will be 1800fps plus.

  16. #16
    Boolit Buddy
    phil3333's Avatar
    Join Date
    Mar 2010
    Location
    Utah
    Posts
    188
    put me down for option 1

    hmap33 at a o l dot com
    Last edited by phil3333; 04-21-2013 at 11:54 PM.

  17. #17
    Boolit Master
    Join Date
    Mar 2009
    Posts
    1,625
    Ctious, I took the liberty of putting you on the list for a number 1. You know you want it and you are also the 15th so that makes us official.

    I'll ask Miha to put us on his schedule.

  18. #18
    Boolit Master
    Join Date
    Apr 2010
    Location
    Oklahoma
    Posts
    872
    I'm in for (1) 170gr Option 1.

    denneyr (at) sbcglobal (dot) NET

    Thanks Oreo for all your work on this buy.
    Bob

  19. #19
    Boolit Mold
    Join Date
    Nov 2012
    Posts
    16
    Put me down for a 170 with all pin options. Thanks

    Drs dot 1964 at yahoo dot com

  20. #20
    Boolit Buddy
    LabGuy's Avatar
    Join Date
    Sep 2010
    Location
    Tallahassee Florida
    Posts
    348
    Please put me down for:

    One Option 1. Mold cut for 170gr WFN
    One Option 2. Mold cut for 150gr WFN

    LCEL at hotmail dot com

    I think had better start squirreling away $10/week, this is going to hurt. But, hurt so good.

Page 1 of 20 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check