Load DataSnyders JerkyWidenersReloading Everything
Inline FabricationRepackboxLee PrecisionTitan Reloading
RotoMetals2 MidSouth Shooters Supply
Results 1 to 3 of 3

Thread: Question About Powders for 300 AAC 220gr Subs

  1. 10-24-2023, 05:19 PM #1
    DougGuy
    DougGuy is offline
    Vendor Sponsor

    DougGuy's Avatar
    Join Date
    Apr 2013
    Location
    just above Raleigh North Carolina
    Posts
    7,409

    Question About Powders for 300 AAC 220gr Subs

    I have the Hodgdon data, 9.2gr H110/206 1,046fps 28,100psi,
    and 8.4gr Lil'Gun 1,062fps 26,500psi

    Also have HS6, Unique, Herco but I haven't yet found load data for those powders with the 220gr J-word.

    I have both magnum and standard small rifle primers.

    What's your go to load data for 220gr subs? I am only targeting 1000fps, as the Remington factory load lists 1000fps as the published velocity. I'd like to basically duplicate this load.
    Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.
    Reply With Quote Reply With Quote
  2. 10-24-2023, 05:55 PM #2
    Recycled bullet
    Recycled bullet is offline
    Boolit Master Recycled bullet's Avatar
    Join Date
    Oct 2022
    Location
    Suburbs south of dc
    Posts
    737
    I like 10 grains of IMR-4227.
    Reply With Quote Reply With Quote
  3. 10-24-2023, 06:01 PM #3
    Finster101
    Finster101 is offline
    Boolit Master


    Finster101's Avatar
    Join Date
    Aug 2009
    Location
    SW Fla
    Posts
    2,657
    I'm using 10 grains of 1680 over a 230 grain lead boolit. It is super quiet and locks the bolt back on the last round.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check