I picked up a LEE Loader in 32 Winchester Special over the weekend. Its in very nice condition in the newer red plastic box, but it doen't have the load data sheet in it. Can anyone post, e-mail, or send me a copy of this?
|
   
   
|
|
I picked up a LEE Loader in 32 Winchester Special over the weekend. Its in very nice condition in the newer red plastic box, but it doen't have the load data sheet in it. Can anyone post, e-mail, or send me a copy of this?
If you don't find one sooner, I know where there is one at, it will be a month or two till I have access to it though.
I think the info in the newer loaders is the same as is listed in the Lee manual #2 though.
rich
If you'd like me to fax Lee #2 let me know.
I have the LEE #2 at home and will look to see what they have. I really would like to have a copy of the original load data sheet that went with the LEE loader to complete the outfit, even though it will probably be of limited use. Sometimes the data given is a gem though.
Is it the same as the load sheet that comes with the reloading dies ? Just a thought
Only dumb question is the one not asked
Life Member NRA
Life Member GOoA
Give lee a call and see if they still have the hard card inserts available. I did that for an old set for 357 mag and they still had a card for the red and black cardboard box. You might get lucky.
I'm a computer dummy but I managed to scan mine now I'll see if I can post it!
Sorry, I doubt if you can read it but I don't know how to get it any better.
Mike
I have the same chart as Muskrat Mike posted so I won't put it up. Here is a page from Lee's original Reloading Handbook (one of my best finds)...
Here is a copy of the data from the load sheet that comes with the Pacesetter dies as it uses the current "yellow" dipper set...
Michael
Could you possibly scan the cover of that original reloading book. Looks to be a dandy from the data given.Originally Posted by Ranch Dog
Here you go... It's actually a very nice manual especially if you have an interest in the Loaders as it contains all the tables from those kits. It is 99 pages and contains all the kits through the period (no date in the book). Lee was still Lee Custom Engineering, Inc..
Michael
Thank You, now I know what to look for.Here you go... It's actually a very nice manual especially if you have an interest in the Loaders as it contains all the tables from those kits. It is 99 pages and contains all the kits through the period (no date in the book). Lee was still Lee Custom Engineering, Inc..
For us.32 Remington afficianados it should be noted that the Lee Loader data card for the Special also notes that the dies and data work for the Remington. They do. BvT
Every lawbreaker we allow into our nation, or tolerate in our citizen population leads to the further escalation of law breaking of all kinds and acceptance of evil.
Since almost all aspects of our cultural existence are LIBERAL in most states, this means that the nation is on a trajectory to dissolution by the burden of toleration and acceptance of LAWBREAKING as a norm, a trajectory back to the dark ages of history.
BvT
I have the little Lee book as well. I got mine around 1970-71...Ray
Proud member in the basket of deplorables.
I've got the itch, but don't got the scratch.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
