i have a marlin 3030. how much of a problem would it be to take it to 38-55 are 375win.?
i have a marlin 3030. how much of a problem would it be to take it to 38-55 are 375win.?
30-30 will out shoot 38-55 all day long.
If you want one, just buy one, dont ruin a good 30-30
I have sworn on the altar of GOD eternal hostility against every form of tyranny over the mind of man.Thomas Jefferson
" Any law that is NOT constitutional is not a law" James Madison
Unless of course the 30-30 is already shot out, or the bore is dark/pitted, or he already has a 30-30 that he likes & came by the Marlin at the right price, or he just plain wants something that size, I for instance have a 64(not pre) 94 Win in 32 Special the finish was pretty non-existant on the receiver & the wood, but otherwise a functional piece. I plan to have it re-bored to 35/30-30 by JES. as to how much it'll cost, depends on whether you want 3 groove or 4/5 groove rifleing, if memory serves its $225 for 3 & $250 for 4 or 5 groove, and he stated about a 2 week turn.
Just be reminded that the .375 Win has a 50,000 psi SAAMI pressure rating, which I think is over what that Marlin is good for. The .38-55 was/is a great round for paper patching. And don't sell it short for accuracy.
Cognitive Dissident
No problem at all - send it to JES REBORING (Oregon), along with a check for $245 (last I checked), and he'll rebore & chamber it to .38-55.
No other changes would be necessary. Under Federal law, you don't even need to use an FFL to send/receive your own rifle to him (or any other FFL) for customization and/or repair.
.
Now I lay me down to sleep
A gun beside me is what I keep
If I awake, and you're inside
The coroner's van is your next ride
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |