Titan ReloadingStainLess Steel MediaGraf & SonsInline Fabrication
Ballisti-CastLee PrecisionRotoMetals2MidSouth Shooters Supply
Results 1 to 3 of 3

Thread: Anyone using the Lyman / Ideal 358425?

  1. #1
    Boolit Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    5,856

    Anyone using the Lyman / Ideal 358425?

    Picked up an Ideal version a little while back and just cast it today. Interesting design... A button nose wad cutter with 2 small round grease grooves that drops 112 grains from my range scrap alloy. This one casts a .360 body with a short .347 diameter portion forward of the shoulder. I assume that it is intended to be loaded crimped over the shoulder with the forward portion out of the case.

    Does anyone else have one of these? If so, how do you like it? Any pet loads? I was thinking of starting with Bullseye...


  2. #2
    Boolit Master
    tward's Avatar
    Join Date
    Oct 2009
    Location
    Rochester, NY
    Posts
    243
    I've got the same mold. Very accurate in my GP 100 with a light load of Trail Boss, Bullseye or Unique. Bullseye start at 2.0 grains, Unique start at 4.5 grains. I believe it is loaded button up crimped in first grove. I think you will like this. Tim

  3. #3
    Boolit Master


    williamwaco's Avatar
    Join Date
    Oct 2010
    Posts
    3,918
    That top groove ( near the button ) is clearly a crimp groove

    That said, do not crimp INTO that groove. YOu want only a very slight crimp.

    See:

    http://reloadingtips.com/how_to/crimping_revolvers.htm



    .
    First reload: .22 Hornet. 1956.

    Where is John Galt?

    (If you don't know, you owe it to yourself to find out. )
    .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check