I believe you got me listed wrong... It should be a 4-cav in brass with penta pins. But .357 would do i guess... I can cast hot if I need to, that way I can also load this in .38spl...
I believe you got me listed wrong... It should be a 4-cav in brass with penta pins. But .357 would do i guess... I can cast hot if I need to, that way I can also load this in .38spl...
Currently looking for a Lyman/Ideal 311419 Mold - PM if you have one you'd like to get rid of!
JDGabbard's Feedback Thread
"A hand on a gun is better than a cop on the phone," Jerry Ellis, Oklahoma State House of Representatives.
The neighbors refer to me affectionately as, "The nut up on the ridge with the cannon." - MaxHeadSpace.
Jdgabbard's very own boolit boxes pattern!
One .359 Cramer w/ all pins, please.
hoplite dot junk at comcast dot net
Actually can I get all the pins?
Thanks
See Some of My Holster Work Here:
www.whitetigerleatherworks.com
Please put me down for one .357 four cavity cramer HP mold with pin options #1 and #2 (large and penta).
If I understand correctly, that is $120 (mold and #1 pin set) + $16 (#2 pin set) + $20 (shipping) = $156
rg7slinger at gmail dot com
Thanks,
Ryan
Hi,
One 0.357" cramer mold with large HP pins. Thanks!
n3efo (AT) comcast Dot net
Simon
mebjr53 at netscape dot net Please sign me up for 1 set of .357 cramer molds with all the pins Thanks Gene
Hi,
I was lucky enough to get hold of a mold from the last group buy, so I want to drop out of this one!
I'm number one on the list.
Thanks!
(It's a very nice mold by the way, worth waiting for!)
OK -- let me let my ignorance hang out here for a second...this mould would produce a 125GR HOLLOW-POINT, but if I'm seeing it right, it looks like it's the same schematic as MiHec's 147grain SOLID for 9mm...are my assumptions correct?
Also, any chance this could be offered in a 2-cavity block as well (I have no idea what the setup difference for the machine work is between the two)
And for anyone on the fence, I have the old original (aluminum) 147gr mold, and it makes GREAT bullets, good accuracy, easy loading, and very versatile (works nice in .38, .38 super, and 9mm!) ... assuming it's the bullet cut I think it is.
American by birth
Texan by the Grace of God!
I'm in - 4 cav HP in .359 with Large and Penta pins please.
gunslinger1911 (at) columbus (dot) rr (dot) com
Cogno, Ergo, Boom
If you're gonna be stupid, don't pull up short. Saddle up and ride it all the way in.
Please put me down for .359 with flat point, large and penta pins.
robinsondcsl a t g mail (period) com
What's the time frame for this mold?
My 9mm barrel measures out to .357 .
I ordered the .359 so I could use the same with my 38 special.
Would that be too much sizing to step it down from 359 to 358?
I would like a brass 4 cav. .357 with all the pins thank you. ryoung1960athotmaildotcom.
One... mold...ALL the pins. In .359" Please
njmtca AT 3riversdbs.net
FN in MT
Last edited by FN in MT; 03-16-2013 at 07:45 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |