any one used the clifton mount on the axis rife yet. do i need to machine barrel to straight at breech. does the mount have set screws to get it aligned with bore?
just need some advice before buying this.
thanks
any one used the clifton mount on the axis rife yet. do i need to machine barrel to straight at breech. does the mount have set screws to get it aligned with bore?
just need some advice before buying this.
thanks
You'll need to machine a straight cylinder just forward of the barrel nut. I'd suggest about 3" forward of the nut for a .900" OD.
I don't believe there isn't enough side thickness in the stock to accomodate the mount from what I'm measuring (.150").
I don't recall seeing set screws when I looked at one several years back, but it was just a cursory inspection.
thanks for the heads up. just trying to do something simple. i may cut 2 dove tails and use threaded blanks to hold a picaninny rail. will have to set up height of spacers to get aligned with bore. just don't have any access to machine tools here.will post pics when it gets done.rife is very capable.have cut to 18" and threaded,used die,to 5/8x24.put a "forward" comp on it. working on load now.would like to find a source for sample qty's of cast bullets to use for testing. then will buy mould and die to size / g.c. thanks again.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |