Has anyone had any experience ( good or bad ) with the 164 gr gc rn Lyman 287308 ? I am looking to try it in 70/8 and would like to hear if it has been found to be a dog or a shining star! Any ideas or input would be appreciated.
Has anyone had any experience ( good or bad ) with the 164 gr gc rn Lyman 287308 ? I am looking to try it in 70/8 and would like to hear if it has been found to be a dog or a shining star! Any ideas or input would be appreciated.
A shining star in the 7x57mm M95 Mausers...............
Old post I know. I just tried this bullet in a Ruger #1 in 7x57 using 10. Unique. Bullet seated to touch the lands. Was getting 1 inch at 100 yards. Was using WW and PC sized to .288
Finding one of these is like finding hens teeth.
Anyone make a decent clone - NOE lists a 171gr that looks close??
Have a Mcgowen bbl that shoots lights out with J's and if I stumble on one
of these I'll jump on it and play with my 08 a little bit but it's a second tier
project at the moment.
I’ve shot a few out of my 280.
I’ll actually be casting more of these pretty soon, if you’d cover shipping I’d be happy to send you some . PM me if your interested we can talk alloy, and sizing
Sent from my iPhone using Tapatalk
I made 50 each with unique, 700x and rx7 they all shot about 3” at 100 yards. The groups were opening up because I was not letting my pencil barrel cool very much . I believe I could get better groups with some effort but I got distracted shooting my 358 win with cast . I’m close enough to deer season now I won’t adj my scope . I’ll probably start tinkering with this boolit again in the spring. They are fun !
Sent from my iPhone using Tapatalk
I did try this one in my 7mm-08 (CVA Optima Elite) but it has to be seated so deep to chamber that it didn't work very well. That 7x57 sporter I pictured above has a generous throat, despite it having a commercial barrel on it. I can seat that bullet far enough out that nothing is inside the case. I size mine to .287, by the way.
There is a two cavity with handles currently on that auction sight for 20 bucks . It’s not mine I’m not affiliated
Sent from my iPhone using Tapatalk
An excellent bullet in my 7x57 M95 Mauser. When cast of COWW + 2% tin I found 26 gr IMR4895 with a Dacron filler to be a very accurate load. In your 7-08, should you choose to try IMR4895, I suggest starting at 20 gr and work up to 27 gr with a Dacron filler.
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
115 bucks after shipping with time left to go. I did not realize they went for that much money .
Sent from my iPhone using Tapatalk
great bullet. I shot my 287308 in handgun Sil. Full loads in 7 Int. Rimmed
beltfed/arnie
I would like to have one of these molds to try out in a few of my single shot pistols. Probably not enough interest for a group buy but I sure would be interested.
I was a dog on a short chain.
Now there's no chain.
Jim Harrison
http://noebulletmolds.com/NV/index.p...3c07ijqe8re4d1
Couple of choices here.
[The Montana Gianni] Front sight and squeeze
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |