MiHec 2 or 4 cavity brass 358640 380 ACP/9mm Luger & Makarov Cramer HP GC or PB
This GB is Closed.....
This is a new design in this weight series. This will be a two or four cavity, Cramer brass HP mold. It will cast at 0.358" or just slightly over for the 380 ACP and 9mm Luger……… and 0.366” for the 9mm Makarov. Gas check and plain base versions will be available for both, but the 9mm Makarov GC version will probably have to use either home made GC or 375 GCs. How the makarov GC works out is really up to the buyer since it is a special size Edit... Gator is offering 9.3 GCs now. The internal base diameter is the same as the 375 which is about 0.004" larger than the GC shank diameter. These may or may not work. that is not offered with no guarantee of fit. Dependent on what MiHec orders for cherries, these molds might be cut with one cherry and bored and orbited for different options, his choice on that.
Edit: For those of you wondering about it's use in the 357 Sig, here are the parameters.
If you seat the GC version to the base of the neck, 0.035" of the front band shows and the cartridge is under the spec length of the cartridge. If you seat the front band to the end of the case, about half of the GC surface is in the case with no lead exposed. Either way it looks to work out.
We will need fifteen to commit to this. We will run this until we get the number we need or until MiHec closes the GB.... and there is no selected date that will happen.
For the two cavity mold, the price is $85 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.
For the four cavity mold, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.
If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.
Pin options: 1) large HP, 2) penta HP, 3) blank pin for flat nose
Please list your Forum name and your disguised e-mail address in suitable form and the pin options you think you want along with the number of molds.
Here is a sign-up list:
1. FLYCUTTER.....r underscore kark AT ATT dot net..... One 4 cavity 0.358" plain base mold with large and penta pins & One 4 cavity 0.366" plain base mold with large and penta pins
2. Crosbyman.....trimmATtbjonesllcDOTcom.....One 4 cavity 0.358" plain base mold with penta pins
3. pomofo.....pmfoss [at] gmail {dot} com. .....One 4 cavity 0.366" plain base mold with large pins
4. autodidact.....jbpaul (at) suddenlink (dot) net.....One 4 cavity 0.358" plain base mold with all pins
5. harley45.....Eric at white tiger blog dot com..... One two cavity 0.358" plain base mold with all pins
6. forcedconvection.....rg7slinger at gmail dot com.....One 4 cavity 0.358" plain base mold with large and penta HP pins
7. fixit156.....Fixit156AThotmailDOTcom.....One 4 cavity 0.358" gas check mold with large pins
8. rcwarship.....rcwarship at comcast dot net.....One 4 cavity 0.358" plain base mold with large and penta HP pins
9. cja245.....cja245 at gmail dot com.....One 4 cavity 0.358" plain base mold with large and penta HP pins
10. CPL Lou.....louiestanfield (at) gmail (dot) com.....One 2 cavity 0.358" gas check mold with all pins
11. jimgun.....jgruver2013 at gmail dot com......One 4 cavity 0.358" gas check mold with all pins
12. Hamish.....popeye91 ar frontier dot com.....One 2 cavity 0.358" plain base mold with large and penta HP pins
13. sparkz.....Sparkz1000 AT GmAiL Dot Com-awn.....One 2 cavity 0.358" gas check mold with all pins
14. timberhawk.....grbusby at tx dot rr dot com.....One 4 cavity 0.358" plain base mold with all pins
15. Ruger480.....cazzoo at comcast dot net .....One 2 cavity 0.358" plain base mold with large HP pins
16. Buzz64.....buzz at joniypc dot com.....One 4 cavity 0.358" plain base mold with all pins
17. dogman.....mlmaher at gmail dot com......One 4 cavity 0.358" gas check mold with large HP pins
18. 44 mag nut.....magnut44 at gmail dot com.....One 4 cavity 0.358" plain base mold with large HP and blank pins
19. alha.....snowserver (at) hotmail d0t com .....One 4 cavity 0.358" gas check mold with all pins and One 4 cavity 0.366" gas check mold with all pins
20. lup.....rstaab (at) Panix dot com.....One 4 cavity 0.358" plain base mold with all pins
21. Darkh2odiver.....darkh2odiver (at) hotmail [dot] {com}.....One 2 cavity 0.358" plain base mold with 2 sets of large HP pins
22. TMSCU.....tmoyer1952 at yahoo dot com.....One 4 cavity 0.358" gas check mold with all pins
23. funshooter.....weldinspector at earthlink dot net.....One 4 cavity 0.358" plain base mold with all pins
24. gtgeorge.....gspatton at gttransmissions dot com.....One 4 cavity 0.358" plain base mold with all pins
25. jeremiah.allen1.....jeremiah (dot) allen 1553 (at) gmail (dot) com.....One ? cavity 0.358" plain base mold with all pins
26. sergraf.....sergio underscore rafanan at yahoo dot com.....One 4 cavity 0.358" plain base mold with all pins and one set of handles
27. redneckdan.....dmhamilt (at) mtu (dot) edu.....One 2 cavity 0.358" plain base mold with penta pins
28. BMKoenig.....rommelbmk (at) comcast (dot) net.....One 4 cavity 0.358" gas check mold with all pins and One set of handles
29. tiger762.....kef762 AT yahoo com.....One 4 cavity 0.358" plain base mold with all pins
30. Rymark223.....sbmathews74 at gmail dot com.....One 4 cavity 0.358" gas check mold with large and penta HP pins and One 4 cavity 0.366" gas check mold with large and penta HP pins
31. dkf.....krflff2 (at) dejazzd (dot) com.....One 4 cavity 0.358" plain base mold with all pins
32. huntnfish72.....Billyv3 at newnorth dot net.....One 4 cavity 0.358" plain base mold with all pins
33. jwfox....jay dubya fox nine four eight zero AT America On Line dot com.....One 4 cavity 0.358" plain base mold with both large, penta pins and blank pins and One set of handles
34. SP5315.....wmclark AT email DOT com.....One 4 cavity 0.358" gas check mold with all pins and One 4 cavity 0.358" plain base mold with all pins
35. doctorggg.....gggmmg at verizon dot net .....One 4 cavity 0.358" plain base mold with all pins
36. Bruzier.....b dot rolfe1 at bellaliant dot net.....One 4 cavity 0.358" gas check mold with large and penta HP pins
37. kayak1.....jason at kates (dot) [org].....One 4 cavity 0.358" plain base mold with all pins and One set of handles
38. Skew.....edotson123 (at) tx (dot) rr (dot) com.....One 4 cavity 0.358" plain base mold with all pins
39. dieselrealtor.....doug at realtorsink dot com.....One 2 cavity 0.358" plain base mold with all pins
40. Ironwood.....ironwood of evergreen at yahoo dot com.....One 4 cavity .358" gas check mold with all pins
41. Bluestraw.....Bluestraw at a o l (d o t) c o m.....One 4 cavity 0.358" gas check mold with all pins
42. SethD.....seth doty 44 4 at hot mai l dot com.....One 4 cavity 0.358" gas check mold with large and blank pins
43. TMSCU.....tmoyer1952at yahoo dot com.....One 4 cavity 0.358" gas check mold with large and penta pins
44. Virginia John.....jwstuartjr at hotmail dot com.....One 4 cavity 0.366" plain base mold with all pins
45. eezz.....eezz at g mail dot com.....One 4 cavity 0.358" gas check mold with all pins and One 4 cavity 0.366" plain base mold with penta pins and Two sets of handles
46. oldsingleshots.....haletree at att dot net.....One 2 cavity .358" gas check mold with all pins and One set of handles
47. tygar.....tbrolliniATgciDOTnet.....One 2 cavity 0.358" plain base mold with small HP and blank pins
48. Aaron.....5090shiloh at gmaildotcom.....One 4 cavity 0.358" plain base mold with all pins
49. chprplt.....exit 13 five at aol dot com.....One 4 cavity 0.358" plain base mold with all pins
50. AZBrian.....sellsell(at)cox(d0t)net.....One 4 cavity 0.358" plain base mold with all pins & One 4 cavity 0.358" gas check mold with all pins
51. atom73.....neilsbohr73@ yahoo. you know what.....One 2 cavity .358" plain base mold with large pins and One set of handles
52. castblast.....sthwld64atgmaildotcom.....One 4 cavity 0.358" plain base mold with all pins
53. mpbarry1.....mpbarry1 at gmail dot com.....One 4 cavity 0.358" plain base mold with all pins
54. hicard.....hicard21atoutlookdotcom.....One 2 cavity 0.358" plain base mold with large pins
55. rnelson11.....rnelson11 at chesnet dot net.....One 4 cavity 0.358" gas check mold with all pins
56. Sgt Petro.....aaronpetroski at gmail dot com.....One 2 cavity 0.366" plain base mold with all pins
57. maderawood6.....maderawood6 at geemail dot com.....One 4 cavity 0.358" plain base mold with all pins
58. ballistim.....ballistim(at)yahoo(dot)com.....One 4 cavity .366" plain base mold with penta pins
59. tiger762.....kef762 AT yahooDOTcom.....One 4 cavity 0.358" plain base mold with large pins
60. taugust.....g99jeb at aol dot com.....One 4 cavity 0.358" plain base mold with penta and blank pins
61. HillBilly2.....ffrisby AT hot mail dot com.....One 4 cavity 0.358" plain base mold with penta and blank pins
62. J & D Armament.....Jdarmament at gmail dot com.....One 4 cavity 0.358" plain base mold with penta pins
63. double00.....jcgraeler at gmail dot com.....One 4 cavity 0.358" plain base mold with all pins
64. tja6435.....Tja6435 at gmaildotcom.....One 4 cavity 0.358" plain base mold with large and penta pins
65. silverjay.....Silverjay7 at gmail dot com.....One 4 cavity 0.358" plain base mold with large pins
66. dragon813gt.....dragon813gt at yahoo dot com.....One 4 cavity 0.358" plain base mold with all pins
67. 45 2.1.....One 4 cavity 0.358" plain base mold with all pins
68. 45 2.1.....One 2 cavity 0.366" plain base mold with all pins
69. 45 2.1.....One 2 cavity 0.358" gas check mold with all pins
70. vbmax.....vbmaxATcox.net.....One 4 cavity 0.358" plain base mold with large and blank pins