MiHec 8mm Karabiner 2 or 4 Cavity Brass Cramer
This was a GB from Lee a long time ago. This will be cut to the original specs, not what has appeared since then. This will be a two or four cavity cramer brass GCHP mold that is suitable for the 8mm caliber rifles cartridges. It will cast at 0.326". The weight was about 237 gr as a hollow point and 240 gr. as a solid ready to load dependent on your alloy. Several of use have shot this boolit for years and it does very well. It was designed to go in the 8x57mm with somewhat worn throats, but also fits in most newer throats.
We will need fifteen to commit to this. We will run this until we get the number we need or more.
Pin options include: 1) large round HP, 2) blank pin for solid
For the two cavity mold, the price is $90 with one set of HP pins included plus $8 for the extra blank (flat nose) pin set if wanted plus $15 shipping.
For the four cavity mold, the price is $120 with one set of HP pins included plus $16 for the extra blank (flat nose) pin set if wanted plus $20 shipping.
Edit: If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.
Please list your Forum name and your disguised e-mail address in suitable form..... the number of 2 or 4 cavity molds you want and if you want the blank pin option.
Sign Up list:
1. NYBushBro.....mopedmedic at hotmail dot com..... One 2 cavity mold with all pins
2. SP5315.....wmclark AT email DOT com..... One 2 cavity mold with all pins
3.