RotoMetals2ADvertise hereInline FabricationLee Precision
RepackboxWidenersTitan Reloading

Page 31 of 31 FirstFirst ... 2122232425262728293031
Results 601 to 603 of 603

Thread: Mihec 10mm - 200gr WFN / .40s&w - 180gr HP, 4-cavity, Brass

  1. #601
    Boolit Buddy


    RedHawk357Mag's Avatar
    Join Date
    Feb 2010
    Location
    Duncan, Oklahoma, United States
    Posts
    479
    Quote Originally Posted by LabGuy View Post
    That's what I use in my S&W Shield, large pins run 185 gr. with my alloy. They also cut pretty nice holes in paper.
    Thank you. Appreciate sharing your experience with it.

    Sent from my XT1254 using Tapatalk
    Ruger RedHawk 357 Mag 44 Mag GP100 Davidson Exclusive 5" Security Six 2 3/4", Speed Six 4"
    Smith Wesson 629 PP and 686 PP, 617

  2. #602

    Results MP 10mm 200gr WFN PC version

    Thought about starting a new thread, but thereís so much good stuff in this one thought better to keep it going.

    I was following this rerun gb a couple of years ago but never committed back then. The night before it closed in January, I happened to spot it and jumped in as the last man, just hours before it closed!

    Many thanks to Oreo for honchoing and Miha for another superb product.

    I went for the 200 gr. without lube grooves for PC. It looks like there were only three of these ordered. With the mix I used for the initial trial, went really soft, probably 80/20 with a little tin. The shallow hp is running 207.5 gr. coated and the solid 212 gr. coated with this mix. After coating I ran them through a .401 Lee sizer which they just kissed. There was no deep hp on this buy which is fine with me. I used Smokeís Super Glossy Clear using the DT procedure on the MP-Molds website, with which I got great results. Donít think Iíll ever ESPC again! This is the first MP mold I have gotten that has dedicated flat point pins. Really like that. I found that 700 degrees was the sweet spot for fill out. I donít hunt, probably just use for range and defense. I figure this combo should take care of just about anything that needs to be shot. Iíll be ladder testing hopefully next week and post results from G20 and possibly S&W 1006.

    Click image for larger version. 

Name:	CastingSetup800_600.jpg 
Views:	48 
Size:	41.4 KB 
ID:	220880
    Casting set up in garage.

    Click image for larger version. 

Name:	MPPC_800_600.jpg 
Views:	48 
Size:	53.6 KB 
ID:	220882
    Smoke's glossy clear before baking.

    Click image for larger version. 

Name:	Product800_600.jpg 
Views:	55 
Size:	53.1 KB 
ID:	220881
    Nothin' says lovin' like somethin' from the oven!

    Click image for larger version. 

Name:	Ladder800_600.jpg 
Views:	53 
Size:	437.1 KB 
ID:	220883
    Ladder ready to go.

  3. #603
    Boolit Man
    ranger391xt's Avatar
    Join Date
    Feb 2016
    Location
    Indiana
    Posts
    85
    I got a 190 gr. mold from the last re-run and cast up some solids. I sized them to .401 on a Star sizer and lubed them with Ben's Red. My starting load was 3.8 gr. of HP-38 and loaded 20 rounds in .1 gr increments up to 4.3 gr. I shot 10 "warm up" shots then a 10 shot group with a S&W 4006 from about 8 yards. Pictures of groups are below.

    3.8 gr



    3.9
    gr

    4.0 gr



    4.1 gr



    4.2 gr



    4.3gr



    Sent from my SAMSUNG-SM-G891A using Tapatalk

Page 31 of 31 FirstFirst ... 2122232425262728293031

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check