I'm getting everything setup to start loading for my 1895 Cowboy. I've done a lot of reloading but most pistols so this is a little new. The load I'd like to start with is a 300gr RNFP over 45gr of 3031. I've done a lot of reading on here and I am not sure if I need a filler for this load, please help. Thanks
Last edited by BHTArrows; 11-25-2012 at 06:35 PM.
Duty is Our's; Consequences are God's" - Stonewall Jackson
Sounds about right. You won't need any filler with that load. If you are using the Lyman reloading manuel or any of the others you should be fine. Elmer Keith used a 405 JSP over 50 grains of 3031 that was a real thumper on both ends. Stay with published data and you will fine.
Listen! Do you hear it. The roar of cannons, the screams of the dying! Ahh! Music to my ears!
No filler in a straight case.
Rich or poor, it's good to have money.
Thanks Guys!!
Duty is Our's; Consequences are God's" - Stonewall Jackson
I have been using 45gr Varget with Lee405HB with home make lube with good groups.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote