MiHec 311410 - Brass Cramer HP

[wlc]

Thanks for the update!!!!! I too am on the extras list and hope to get one of these to try in my 300BLK. Sweet looking boolit.

[TheCelt]

ON THE MACHINE!!!!! (I know, finnally )

Yahoo again!!!! Been waiting for this one.....the varmits are gonna have a bad time of it!!!!

[abqcaster]

hot Dang!!!!!

[L1A1Rocker]

I wonder if my paypal account still works. . . .

[Frozone]

I just heard a "wooooppppeeeeee" from my 300 blk.

MiHa don't forget a few 'solids' for those of us who don't want a HP but only a GCed '410

[cbrick]

ON THE MACHINE!!!!! (I know, finnally )

Rick

[cbrick]

MiHa don't forget a few 'solids' for those of us who don't want a HP but only a GCed '410

Supposed to come with three sets of pins. Long HP, short HP and blank for a solid nose.

2 and 4 cavity brass.
Cramer Style HP
Both plain base and gas check versions. (No GC & PB mixing in the same mould.)
Pins: short and long round pins, tapered to prevent sticking, plus blank pins for casting FNs
Diameters of .311" and .316".

Official Pricing
4 Cavity: $160 including shipping, all pins (small round, large round, and blanks), top punch and allen keys
2 Cavity: $115 including shipping, all pins (small round, large round, and blanks), top punch and allen keys

[sparkz]

Damn If anyone drops thu on this one,, I am in for 2cav all pins,Long, Short, blank , Gas Checked (311 or 312, for sizeing to 309)

Sparkz1000 AT Gmail Dot com..

If thers still room I want this never saw it

keep me in loop for any droped buyers



Patrick a day late

[abqcaster]

My money situation has gotten even tighter. (I had to move and my old house is not selling) So, I have to drop out of this GB. It's especially painful, because of all the help I got in picking a design, the long wait and now just barely getting things on the machine. So while I was on the extras list, I was the 3rd one on that list. I asked for the exact same configuration as Sparkz. I'm taking that as a sign that it's okay to let this one go. If it's ok with the Honcho, it's okay with me if Sparkz gets my spot. Good luck in getting the mold you want however that happens.
God bless you all!

[xacex]

Heading to the plasma center....


YES!

[sparkz]

My money situation has gotten even tighter. (I had to move and my old house is not selling) So, I have to drop out of this GB. It's especially painful, because of all the help I got in picking a design, the long wait and now just barely getting things on the machine. So while I was on the extras list, I was the 3rd one on that list. I asked for the exact same configuration as Sparkz. I'm taking that as a sign that it's okay to let this one go. If it's ok with the Honcho, it's okay with me if Sparkz gets my spot. Good luck in getting the mold you want however that happens.
God bless you all!

abqcaster;
Very Sorry to hear about cash flow at the new house,,
Thanks for putting in a word for me, Hope those in the powers that be, will let me have that spot, very kind of you to make mention for us

Thanks Hope springs eternal

God Bless
Patrick & Sean Campbell

[buyobuyo]

ON THE MACHINE!!!!! (I know, finnally )

[LongGun1]

If anyone else wants out or if there are enough extras....I have a relative who also wants a 4 cavity, gas check, .311 mold. So if possible...put me down for 2. Thanks!!
backuppowerconsult10@gmail.com

[Dannix]

LongGun1,
I've added your entries to the extras list.

abqcaster,
I've removed your listing from the extras list. (I've removed it because it's an extra request, not a reserved spot. I also, out of respect to the earlier extra requesters, cannot "bump up" a later comer above the others who have asked to be added to the extras list.)

[LongGun1]

LongGun1,
I've added your entries to the extras list.

Thanks!!

[sparkz]

Thanks Dannin for adding me to e-tra list

I really have need for this one,,

Patrick

[abqcaster]

Thanks Dannix. I understand completely.

[cptkeybrd]

Thanks Miha looking forward to #5

[dancingbear41]

All of my casting activities are on hold until I get this mould. I can't wait.

[bushog]

If you'd be kind enough to add me to the extras list for a .311 GC mold w/ all pins just in case..

Prefer 2 cav but just fine with 4.

boo-haaa (at) hot mail dott com

Thanks,

Bushog