Load DataRotoMetals2RepackboxWideners
Lee PrecisionTitan ReloadingReloading EverythingInline Fabrication
MidSouth Shooters Supply
Page 1 of 5 12345 LastLast
Results 1 to 20 of 99

Thread: Mihec .22 for air rifles

  1. #1
    Boolit Bub Airweaver's Avatar
    Join Date
    Sep 2012
    Posts
    38

    Mihec .22 for air rifles

    This is a run for 30gr(average weight) air rifle bullets,and I will be the honcho while i m the one who design them so i have the exclusivity.





    The discussion thread for this is located here: http://castboolits.gunloads.com/showthread.php?t=164775



    This will be a 6 cv flat base bullet mold, that is suitable for .22 caliber Air rifles.
    This mold will be cut through two designs mix and will have 3cv round nose bullet(RNB),and other 3cv which will be based on a seni-wadcutter(SW-C B) one.
    Mold will be cut in brass blocks to a normal 4cv. hp mold (80x34x40 mm) because there is enough space for those tiny bullets,so there is no reason to use a normal 6cv mold in order to avoid the extra weight or termal conductivity issues too.
    Total price for each mold will be 110$ shipped.(95$ mold+15$shipping cost)


    Will get this buy on the schedule as soon as we get 15 orders or more.
    We will keep the buy open until 2 weeks before the date on the schedule.



    At that time we will close the buy if off course we get the number we need.
    Please give your disguised e-mail address and Miha will contact you at the email address listed next to your name . when he is ready for PayPal payment / delivery.
    Last edited by Airweaver; 05-03-2013 at 12:13 PM.
    "The most difficult thing in the world is to keep your mouth closed the moment you seeing someone doing wrong at something you already know"

  2. #2
    Boolit Bub Airweaver's Avatar
    Join Date
    Sep 2012
    Posts
    38
    List:
    *******************************************
    1.Aaron. - 5650spencerat gmaildotcom
    2.cody9999 - hefkes at yahoo dot com
    3.G-Smith - kendarrll at gmail dot com
    4.Hamish - popeye91 at frontier dot com
    5.alamih - gszabel at interia dot pl
    6.sneaky_nl - ddflatliner at gmail dot com
    7.dromia - adam at pukkabundhooks dot com
    8.Bob J - gjohnson at foxboro dot com
    9.Shooternz - robwertwalker1 at vodafone dot codotnz
    10.rxp46 - janrxp46 at gmail dot com.
    11.twotoescharlie - arrcee4-14 at netzero dot net
    12.guiver. - oblende at gmail dot com
    13.MightyThor - stfagen at msn dot com
    14.Janoosh - Janoosh 357 at gmail dot com
    15. Baja Traveler - kschuma1 at san dot rr dot com
    16.lawboy - Behightower at yahoo dot com
    17. alha - snowserver at hotmail dot com x2 pieces
    18. BrassMagnet - ronaldmeyers at optimum dot net
    19. jbelder - jimelder42 at gmail dot com
    20. Nwaf2007 - Nwaf- at hotmail dot com
    21. Bruizer - b dot rolfe1 at bellaliant dot net
    22. drix. - wadrianocc at gmail dot com
    23. taminsong - taminsong at yahoo dot com
    24.
    ********************************************
    Last edited by Airweaver; 03-11-2016 at 08:38 AM.
    "The most difficult thing in the world is to keep your mouth closed the moment you seeing someone doing wrong at something you already know"

  3. #3
    Boolit Mold
    Join Date
    Apr 2009
    Location
    Southern Indiana
    Posts
    26
    I'm in for A 3&3 (hefkes at ya hoo dot com).

  4. #4
    Boolit Mold
    Join Date
    Oct 2009
    Posts
    6
    I'm in for one of these molds. kendarrll@gmail.com

  5. #5
    Boolit Mold
    Join Date
    Oct 2012
    Location
    Minneapolis, MN
    Posts
    19
    I'm in also for one. (tweigenant at com cast dot net)

  6. #6
    Boolit Master

    Hamish's Avatar
    Join Date
    Jan 2011
    Location
    Edge of The Crab Orchard National Wildlife Refuge
    Posts
    3,569
    Bump-thinking about it.
    More "This is what happened when I,,,,," and less "What would happen if I,,,,"

    Last of the original Group Buy Honcho's.

    "Dueling should have never been made illegal in this country. It settled lots of issues between folks."- Char-Gar

  7. #7
    Boolit Mold
    Join Date
    Nov 2012
    Posts
    2
    I hope its not to late.I'm in for one ! gszabel@interia.pl

  8. #8
    Boolit Mold
    Join Date
    May 2012
    Location
    Netherlands
    Posts
    25
    Put me too on the list ( ddflatliner at g mail dot com)

  9. #9
    Moderator Emeritus
    dromia's Avatar
    Join Date
    Mar 2005
    Location
    UK. Sutherland & Co Durham
    Posts
    5,134
    I'm in!

    Three cavity of each design.

    Should be a challenge to cast.

    adamatpukkabundhooksdotcom


    For fine firearms and shooting requisites visit my Web Site by clicking the link below:

    Pukka Bundhooks

  10. #10
    Boolit Buddy
    Join Date
    May 2009
    Location
    Quincy, Mass
    Posts
    314
    I'm in for one..... gjohnson at foxboro dot com

  11. #11
    Boolit Mold
    Join Date
    Oct 2012
    Location
    Minneapolis, MN
    Posts
    19

    Sorry, but please remove me from the order list.

    Quote Originally Posted by Airweaver View Post
    This is a run for 30gr(average weight) air rifle bullets,and I will be the honcho while i m the one who design them so i have the exclusivity.





    The discussion thread for this is located here: http://castboolits.gunloads.com/showthread.php?t=164775



    This will be a 6 cv flat base bullet mold, that is suitable for .22 caliber Air rifles.
    This mold will be cut through two designs mix and will have 3cv round nose bullet(RNB),and other 3cv which will be based on a seni-wadcutter(SW-C B) one.
    Mold will be cut in brass blocks to a normal 4cv. hp mold (80x34x40 mm) because there is enough space for those tiny bullets,so there is no reason to use a normal 6cv mold in order to avoid the extra weight or termal conductivity issues too.
    Total price for each mold will be 110$ shipped.(95$ mold+15$shipping cost)


    Will get this buy on the schedule as soon as we get 15 orders or more.
    We will keep the buy open until 2 weeks before the date on the schedule.



    At that time we will close the buy if off course we get the number we need.
    Please give your disguised e-mail address and Miha will contact you at the email address listed next to your name . when he is ready for PayPal payment / delivery.
    I have to drop off the order list. This is taking way too long to get anywhere. Thank you.

    Tom

  12. #12
    Boolit Buddy
    Join Date
    Jul 2008
    Location
    Tokoroa, South Waikato, New Zealand
    Posts
    185
    I will take one, robwertwalker1atvodafonedotcodotnz

  13. #13
    Boolit Master

    Hamish's Avatar
    Join Date
    Jan 2011
    Location
    Edge of The Crab Orchard National Wildlife Refuge
    Posts
    3,569
    Sign me up. popeye91 at frontier dot com

  14. #14
    Boolit Master

    fatelvis's Avatar
    Join Date
    Jan 2006
    Location
    Mokena, IL
    Posts
    759
    This would be my first air rifle mould. Do "pellets" need to be lubed with anything, and are they poured using pure lead? Thanks-
    I shoot so that I can handload.

  15. #15
    Boolit Bub Hard_Cast's Avatar
    Join Date
    Feb 2013
    Location
    Lone Star, TX
    Posts
    67
    Are these going to work well without 'skirt'? I'd be more prone to getting one if they were nose pour, flat-point, with a hp-pin type projection to from the skirt.

  16. #16
    Boolit Mold
    Join Date
    Apr 2009
    Location
    Southern Indiana
    Posts
    26
    Quote Originally Posted by fatelvis View Post
    This would be my first air rifle mould. Do "pellets" need to be lubed with anything, and are they poured using pure lead? Thanks-
    Normally just pure lead with enough tin to get the mold to fill out, 1-2%.

  17. #17
    Boolit Mold
    Join Date
    Jan 2011
    Location
    Netherlands
    Posts
    19
    I am in.
    janrxp46 at gmail dot com.

    Gr Jan.

  18. #18
    Boolit Mold
    Join Date
    May 2011
    Posts
    29
    Airweaver PM'd me some time back to say that his account had been disabled-- I was unable to email him back, either. I personally don't doubt his good faith and would like to join this buy if it's still on. Airweaver, if you're still here could you say a word or two to the faithful? If not, I'm sad to hear it.
    Sackot.

  19. #19
    Boolit Master twotoescharlie's Avatar
    Join Date
    Jun 2005
    Location
    Georgia, CSA
    Posts
    601
    I'll take one, arrcee4-14@netzero.net

    TTC
    NRA life member (benefactor)

  20. #20
    Boolit Buddy
    Join Date
    Jun 2011
    Location
    Alberta
    Posts
    440
    Quote Originally Posted by sackot View Post
    Airweaver PM'd me some time back to say that his account had been disabled-- I was unable to email him back, either. I personally don't doubt his good faith and would like to join this buy if it's still on. Airweaver, if you're still here could you say a word or two to the faithful? If not, I'm sad to hear it.
    Sackot.
    I don't really understand how he could PM you if his account was disabled. According to his profile, Airweaver visited the cast boolits forum yesterday at 02:59 PM, so if his account was disabled it appears it has been re-enabled now. He has specified that he does not allow forum members to contact him by email. Maybe you could try to PM him again since it appears he is now able to access the site without issue.

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check