Going to be loading the .45-70 for bird and squirrel and wondered how y'all are loading yours with BP. Shot size will probably be #7.5.
Thanks
Going to be loading the .45-70 for bird and squirrel and wondered how y'all are loading yours with BP. Shot size will probably be #7.5.
Thanks
It appears that 20 to 25 grns will do the trick.
I have used 40 gr FFFG GOEX. two .060 fiber wads, two felt wads, 1/2 OZ of shot with a .060 fiber wad over the shot. I compressed the powder and wad column before loading the shot about 1/8 inch. This load was OK out to 15 to 20 feet but the patterns were ineffective on grouse beyond that range. I had poor results with it so went to using a single round ball and going for head shots. I did better with them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |