7mm Thor AKA Ideal 287377 Flat nose, 135 grains

[badgeredd]

I'll be running a Group Buy for this mold using Ballisti-Cast as the supplier for the mold.

Here is the discussion thread:

http://castboolits.gunloads.com/showthread.php?t=158524

A minimum of 10 ordered molds is required. This will be a fairly small group buy based on a modified Ideal 287377 GC boolit. Molds will be cast iron and you'll have a choice of a 2 Cavity or a 4 Cavity mold (or both if you really want). There will be no other options

Post your order on this thread. I will keep the post below this updated with the orders. The group buy will be open until midnight September 7, 2012. At that time I will call for payment and get the order in to Ballisti-Cast as soon as I get the money from everyone or one week, whichever comes first. The pricing will be affected by the number of molds ordered. Once the GB is closed, I'll let everyone know what our mold cost will be if it goes lower than the below prices. Prices for a 10 mold order are below.

2 cavity moulds are $90 ea.
4 cavity moulds are $120 ea.

NEW INFO We now have over 20 total ordered, the molds will be discounted $15; meaning 2 cavity will be $75 and 4 cavity will be $105. If we are fortunate enough to get 30 orders prices will be further discounted.

Shipping to you with insurance will be $10 for those in CONUS. Alaska, Hawaii, and outside of the U.S. Will be adjusted up to the actual cost of shipping to you.

I'll be the honcho. If you have questions, I'll try to get them answered in a timely manner.

Edd Badgley
11478 Born St.
Three Rivers, MI 49093

Please send me a PM or email with your handle, your shipping address, what you ordered, Payment will need to be sent to me at the above address including your CastBoolit handle and the number of molds and cavity count. Also, please remind me if you want handles with your order. I would prefer a Postal MO. My primary reason for requesting a MO is, it will help me get things cleared through my bank faster. It has come to my attention that paying via PayPal would help some of my Castboolit brothers. I'll accept Paypal payments but will be forced to add the 4% surcharge onto the price. Hope this helps from a convenience stand point.

Added info: Ballisti-Cast handles will be available with the group buy for 2 and 4 cavity molds (same handle for both) at a 10% discount or $45. I suspect additional shipping will be needed to accommodate the extra size of the handles. Probably I'll have to use a medium box so I am assuming the shipping with handles will be $15 for CONUS orders. Sorry for the original over-site on my part.

The buy will remain open one month until midnight Eastern Time Sept. 7, 2012. When I call for payment, I will need all payments in within the week or you will miss out.

Ballisti-Cast will ship them all to me and I’ll test cast with one or two of them and then if all is well, send out the molds.

Thank you

Edd

Here's a picture.

[badgeredd]

7mm Thor (.288" diameter is the default size with COWW lead))

1) Badgeredd, 2-2 cavity Paid
2) 280Ackley, 1-2 cavity +1 set handles Paid
3) Hamish, 1-2 cavity Paid
4) Dutch4122, (.290") 1-4 cavity Paid
5) MT Gianni, 1-2 cavity Paid
6) Mark85304, 1-4 cavity +1 set handles Paid
7) bwgdog, (.290") 1-2 cavity +1 set handles Paid
8) dromia, 1-4 cavity + 1 set handles Paid
9) Ken TN, 1-4 cavity +1 set handles Paid
10) 357maximum, 1-2 cavity Paid
11) peterthevet, 1-2cavity +1 set handles Paid
12) blpenn66502 1-2 cavity Paid
13) kbstenberg (.286") 1-2cavity Paid
14) greywuuf 1-2 cavity Paid
15) bearcove 1-2 cavity +1 set handles Paid
16) Iowa Fox 1-2 cavity Paid
17) MostlyOnThePaper (.289") 1-2 cavity Paid
18) kirb 1-2 cavity + 1 set handles Paid
19) jixxerbill (.289") 1-2 cavity Paid
20) Doc Highwall 1-4cavity +1 set handles Paid
21) HighHook 1-4cavity +1 set handles Paid
22) Swiss 96/11 (.290") 1-4 cavity +1 set handles Paid
23) hardcast416Taylor (.288") 1-2 cavity Paid
24) BABore (.288) 1-2 cavity Paid

KEWL! 26 molds ordered!

[280Ackley]

I'll take a 2 cav

[Hamish]

Awright!! Giddy-Up,,,,,

3) Hamish one 2 cavity mould

If we make 30 orders please change to a 4 cavity.

[badgeredd]

I'll take a 2 cav

I thought about you last night and was going to PM you about this mold. Guess you're on top of it anyway.

Edd

[Dutch4122]

I know I originally stated I'd be in for a two cavity, but what the heck!

No need to break with old habits.

Please put me down for a 4 cavity mold.

[kbstenberg]

Ed I will be sitting on the fence till the wife lets me jump.

[MT Gianni]

In for a two cavity. Thanks, Edd.

[Mark85304]

I'm in for one 4 cavity mould.

What handles does this mould use?

[bwgdog]

Am in for a two cavity. Thank You for your efforts with this.

[dromia]

Four cavity please.

[badgeredd]

Ed I will be sitting on the fence till the wife lets me jump.

Oh I know so well whatcha talkin' 'bout. Thanks

Edd

[badgeredd]

We're 80% there for the minimum. This is a good thing!!!!!!!

Edd

[dromia]

[badgeredd]

I'm in for one 4 cavity mould.

What handles does this mould use?

RCBS ( with some modification-opening up the hole for the pins slightly), Lee Commercial (a bit loose), RedRiverRick's Lyman handles, OR Ballisti-Cast. Ballisti-Cast handles will be available with the group buy mold for $45 for the 2 and 4 cavity molds. Regular price is $50 a set so we're getting a 10% discount for them WITH the group buy. I mentioned the handle thing in the Discussion thread.

I'll add the handle pricing to the first post. thanks for mentioning it.

I personally am seriously considering ordering a set of handles along with my mold.

Edd

[dromia]

One set of four cavity handles for me please.

[badgeredd]

One set of four cavity handles for me please.

Sure enough.

Edd

[bwgdog]

One two cavity and one set of handles please---you have me on list for a four thank you

[Mark85304]

Please add a set of handles to my mould order.

[badgeredd]

One two cavity and one set of handles please---you have me on list for a four thank you

Got er dun for you, thanks.

Edd