Second Run for MiHec 22 Nato brass four cavity solid

**MBuechle** · 10-12-2012, 08:17 PM

I really like Mihec's molds, put me down for one of these, mbuechle AT jasnetworks DOT net.

**Nix** · 10-23-2012, 06:48 PM

Sorry but I'm going to need to cancel my order, just ordered a swaging press and dies for .223.

**xacex** · 10-25-2012, 06:59 PM

I missed the last one. It sounds like everyone got taken care of with the cherry being out of spec on the last round so I guess I will jump in on this one. Put me down for 1 mold 45. 2.1. rogue_diablo at yahoo (d) com

**45 2.1** · 10-25-2012, 08:01 PM

Originally Posted by xacex

It sounds like everyone got taken care of with the cherry being out of spec on the last round

The cherry wasn't out of spec. On the first cut, several months before it was a GB, MiHec cut five molds for testing. They were to spec. The second cut.... the first run of the GB..... something happened (I suspect the machine orbited while cutting slightly) and the out of spec molds were cut. The second cutting on the GB was fine.

**garym1a2** · 10-25-2012, 08:20 PM

He did a great job making it right. These are my best molds.

Originally Posted by xacex

I missed the last one. It sounds like everyone got taken care of with the cherry being out of spec on the last round so I guess I will jump in on this one. Put me down for 1 mold 45. 2.1. rogue_diablo at yahoo (d) com

**xacex** · 10-25-2012, 09:46 PM

Originally Posted by 45 2.1

The cherry wasn't out of spec. On the first cut, several months before it was a GB, MiHec cut five molds for testing. They were to spec. The second cut.... the first run of the GB..... something happened (I suspect the machine orbited while cutting slightly) and the out of spec molds were cut. The second cutting on the GB was fine.

Thank you for clearing this up. I was just left with an impression that something went wrong with the cherry on the last group buy, and nothing was mentioned about what that was. It was just my assumption based on my limited knowledge. You, and Mehec did a great job of getting everyone taken care.

I would like to see more accuracy results posted for this mold. It sound like it has been a shooter from the results posted.

**45 2.1** · 10-25-2012, 10:03 PM

Originally Posted by xacex

I would like to see more accuracy results posted for this mold. It sound like it has been a shooter from the results posted.

That's one of my projects..... a little down on the list though as I have some others that are quite interesting. We have found that a duplex loading is accurate, but somewhat dirty.

**Aaron** · 10-26-2012, 01:56 PM

Please add me

5090shiloh at gmail dotcom

Thanks

Aaron

**mktacop** · 10-26-2012, 03:06 PM

I'm #7 on the list and will have to drop out. I've discovered my AR doesn't like lead at all.....sorry

**MUSTANG** · 10-28-2012, 12:30 AM

Please add me to the list for one mold.

BillParson at Hotmail dotcom

**45 2.1** · 11-01-2012, 07:39 AM

This GB is closed...

MiHec says the molds are ready to ship.

**MiHec** · 11-01-2012, 09:59 AM

All PayPals are out!

If you missing one, please contact me via PM.

**spuddicus** · 11-01-2012, 10:28 AM

woooooooooo paid!

**doctorggg** · 11-01-2012, 04:53 PM

Paid mine today as well. Gregory

**Hayesnjess** · 11-01-2012, 07:30 PM

Paypal sent

**Patrick L** · 11-01-2012, 09:29 PM

Ready to ship?? I thought it was going to be months. Or does he require payment to put us in the line for production?

**Patrick L** · 11-01-2012, 09:40 PM

Ok, so I need help with this Paypal thing, since I don't have a Paypal account. If I understand this correctly, I can just use the link on Mihec's invoice to use my credit card to pay into his Paypal account, correct? The information I enter is my own, right? That includes changing the default country from Slovenia to United States, right? I enter all my info and credit card, he gets his money, and he also gets my information (address, etc.) to ship me my mold. Is this all correct?

Sorry to sound so 20th century, I'm just up to date with all of this online stuff. I'd rather just send him a check!

**buyobuyo** · 11-01-2012, 11:12 PM

Originally Posted by Patrick L

Ok, so I need help with this Paypal thing, since I don't have a Paypal account. If I understand this correctly, I can just use the link on Mihec's invoice to use my credit card to pay into his Paypal account, correct? The information I enter is my own, right? That includes changing the default country from Slovenia to United States, right? I enter all my info and credit card, he gets his money, and he also gets my information (address, etc.) to ship me my mold. Is this all correct?

Sorry to sound so 20th century, I'm just up to date with all of this online stuff. I'd rather just send him a check!

Just click the Pay Now button in the email. It will take you to paypal, and the page will have the option to login or below that it will say I don't have a paypal account. Click the latter and then enter your CC info and mailing address.

**Patrick L** · 11-02-2012, 06:27 AM

Thanks buyobuyo. That's what I meant by the link, the Pay Now button.

Do I change the default country to my country (ie United States?)

**MiHec** · 11-02-2012, 11:52 AM

Originally Posted by Patrick L

Thanks buyobuyo. That's what I meant by the link, the Pay Now button.

Do I change the default country to my country (ie United States?)

Yes. Be sure that you give correct shipping address

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: Second Run for MiHec 22 Nato brass four cavity solid

Thread Tools

Posting Permissions