I'll take (1) 2 cavity solid mold. Jamie_Piotrowski at hotmail dot com
I'll take (1) 2 cavity solid mold. Jamie_Piotrowski at hotmail dot com
Regarding post 37, is he able to do a PB, and what would he charge?
I was wondering about a plain base available, just in case I might want one also. Make my mould a gas check version please
Is this the same as the one in the GB that just finished a few weeks ago? I didn't get in on that because Plain Base was not an option. Is Plain Base an option this time?
I would likw a brass 4 cavity solid.
ronaldmeyers at optimum dot net
Is this the same as the one in the GB that just finished a few weeks ago?
No, it is not.
I didn't get in on that because Plain Base was not an option. Is Plain Base an option this time?
A plain base option, on this and some other GBs, is being discussed with the mold maker presently. It all depends on what he says. You'll know shortly after I do.
Could you please post dimensions of this bullet mold design in the schematic picture? (length, band/groove diameter/width/positioning, gas check shank dimensions, nose diameters etc.)
Looks like an awfully deep lube groove.
Last edited by catboat; 02-15-2013 at 09:22 PM.
Also need to look at dimensions on this one-the 180 mold just recieved is a bit larger than I expected-but can still use . tia
put me down for One 3 cavity Cramer HP
ktensig AT ilstu DOT edu
No answer as of yet if a plain base option is possible or its price if it is.
Detailed dimensions will not be posted. This design has been well proven from BRP molds already in the Garand and other 30-06 rifles.
MiHec has the Gator and Hornady gas check tables for GC shank size now. I believe he will try to cut the shank about 0.001" under maximum for those of you that use too hard of alloys.
Thread updated........
45 2.1, quick question for you, how well would this work for a .300 Blackout subsonic round?
I want a 3 cavity HP please.
Dwayneinfo at yahoo dot com
Dwayne
Never underestimate the power of stupid people in large groups.
Two cavity solid, please.
skc1200 (at) hotmail DOT com
Please put me down for a 4 cavity solid mould
jjakubo1 (at) nycap DOT rr DOT com
I would like a two cavity solid.
maddem358 at yahoo dot com
I'll take a 3 cav cramer please. majpatmcd AT gmail.com
I'd like a 4 cav. CurleyQlink at Hotmail dot com
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |