MiHec 2 or 4 cavity brass 314640 100gr. Cramer HP

[45 2.1]

Two questions;
1) How can we find out whether the blank ends of the pins will work or whether there will be 2 sets of pins included?
Thats something the mold maker decides. If the reversed pin doesn't work, he includes blank pins gratis. If the reversed pin does work, you have the HP stem sticking out the bottom of the mold.... thats why the option for blank pins is included... to cast solids without little sharp points sticking out.

2) Now that we have 15+ participants, how soon will the group buy close and making of the moulds be scheduled?
When the mold maker schedules it... and I don't know when that is, but its going to be quite a few months from now in all likelyhood.

Regards,
Froggie

Any confirmation of pricing Pricing is set by MiHec. or information about acceptance of this group buy into Mihec's queue yet?Once you meet minimum, which is 15, your probably on the list. How long do his group buy projects tend to take once they reach a full subscription? Not less than 6 months from inception as a GB and probably close to 10 months.

Froggie

Just put back $15 per month for each mold you order and be patient. It'll happen when it happens.

[Von Dingo]

Please forgive me, but my situation has changed, and have to withdraw from the groupbuys I'm in.

I am #6 on the list.

[jixxerbill]

can someone shed some light for me.. would this size down to .309 for use in my .30 herrett ? my .30 herrett barrel contender loves lightweigth bullets (and i love the no kick of them)..i use straight ww to cast and i would get the gas check version of the mold.. thanks for any and all input.. im new to gas check boolits , been casting for a while but im moving up to bigger and better lol....bill

[45 2.1]

can someone shed some light for me.. would this size down to .309 for use in my .30 herrett ? my .30 herrett barrel contender loves lightweigth bullets (and i love the no kick of them)..i use straight ww to cast and i would get the gas check version of the mold.. thanks for any and all input.. im new to gas check boolits , been casting for a while but im moving up to bigger and better lol....bill

It should size down to that reasonably well.

[jixxerbill]

Put me down for one of these then please. 2 cavity gas check with all pin options. Thank you. Bill

[AnthonyB]

Two cavity all pins for me.
Tony
anthonybennettatcomcastdotnet

[jixxerbill]

Oops jixxerbill64 at the yahoo

[45 2.1]

Two cavity all pins for me.
Tony
anthonybennettatcomcastdotnet

Tony.... you have a choice of a plain base or gas mold mold... which one do you want?

[Tomhorn]

Put me in for one each gas check and plain base, 4 cavity with penta pins and flat pins.
mswilson1at1dotcom

[skimmerhead]

put me down for a 2 cav pb with penta pins. captainbogg AT viscomDOT net

skimmerhead

[45 2.1]

Please put be down for a 4C PB with all the pins

junkdude at efirehose dot net

junkdude.... do you realize you have signed up for two of these molds? You want both or just one???????????

[crash87]

I will take the folowing;
2-cavity / gas check / Large H.P. pins
Ktlachac at aol dot com

[junkdude]

junkdude.... do you realize you have signed up for two of these molds? You want both or just one???????????

Thanks for the catch, not sure how I managed that... I must have been so excited that I accidentally asked for two. Please delete one of them, I'm only needing one.

Russell

[gundownunder]

Dang, this is getting to be an expensive hobby.

I'll take a 2 cavity PB with both Penta and HP pins

canerod at bigpond dot net dot au

[WARD O]

Back to the top

[Hickory]

This one needs a bump.

[NoZombies]

Can my order be changed please? I only need the penta pins (or large HP, if penta's aren't made)

Thanks!

[45 2.1]

Can my order be changed please? I only need the penta pins (or large HP, if penta's aren't made)
Thanks!

Everything updated..........................

[HighHook]

1 - 4 pb with large HP pins

pvolkman3 at gmail dot com

[skimmerhead]

i ask to be removed from this buy because of health problems, i am sorry, thank you.

skimmerhead