Titan ReloadingInline FabricationWidenersLee Precision
RepackboxRotoMetals2ADvertise here

Page 1 of 11 12345678910 ... LastLast
Results 1 to 20 of 214

Thread: MiHec .375 H&H HP GC Boolit - 2 or 4 Cavity Brass Cramer or Solid

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    MiHec .375 H&H HP GC Boolit - 2 or 4 Cavity Brass Cramer or Solid

    MiHec .375 H&H HP GC Boolit - 2 or 4 Cavity Brass Cramer or Solid This is a run of a boolit design out of BRPs catalog. This will be a two or four cavity, cramer or solid brass GCHP mold that is suitable for the 375 caliber rifles. It will cast at 0.378" diameter which will probably be 0.3785" or so as cast. The weight was about 275 gr as a solid. The following is the discussion thread.

    http://castboolits.gunloads.com/showthread.php?t=148218

    We will need fifteen to commit to this. We will run this until we get the number we need or more.

    Pin options include: 1) large round HP, 2) cup nose HP 3) blank pin for solid with no HP pins sticking out the bottom on a reversed HP pin

    For the two cavity mold: The price for the cramer is $90 with one set of pins included plus $8 for the extra pin sets if wanted plus $15 shipping. The price for the solid version is $75 plus $15 for shipping

    For the four cavity mold: The price for the cramer is $120 with one set of pins included plus $16 for the extra pin sets if wanted plus $20 shipping. The price for the solid version is $90 plus $20 for shipping

    If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.

    Prices confirmed by MiHec.........................

    Please list your Forum name and your e-mail address in disguised form, the number of 2 or 4 cavity molds you want, type: cramer HP or solid and pin options if applicable.

    Interest and sign up list:
    1. Ltdshooter.....ericl1(at)charter(dot)net.....One four cavity solid
    2. Rattlesnake Charlie.....charles uunderrscoree nuss aaat yaaho dat coom..... One two cavity cramer with all pins
    3. lup.....Rstaab at Panix dot com.....One two cavity cramer with large & cup HP pins
    4. deepwater.....fredfisher at vacage dot com.....One two cavity cramer with all pins
    5. btroj.....Bdtrojan at cox dot net.....
    One two cavity cramer with large & cup HP pins
    6. sffar.....cheeseburgerfriesandshake AT yahoo DOT com.....
    One two cavity cramer with cup HP and blank pins
    7. CATS.....PM CATS for e-mail address.....One two cavity cramer with all pins
    8. cast-n-blast.....hoover0588 at aol dot com..... One two cavity cramer with blank pins
    9. Aaron.....5090shiloh at gmaildotcom.....One four cavity cramer with all pins
    10. akmac.....twomoose at alaska dot net..... One two cavity cramer with all pins
    11. Ozarklongshot.....Stoneaxe42 at yahoo dot com.....
    One two cavity cramer with large HP pins
    12. Ed In North Texas.....efhaertel at embarqmail dot com.....
    One two cavity cramer with cup HP and blank pins
    13. Ron.D.....(ron-d678 AT hotmail dot com).....One two cavity cramer with cup HP pins
    14. Ramjet-SS.....rocolematyahoodotcom.....One two cavity cramer with all pins
    15. ghope.....greg hope 1 (lower case, no spaces) at hot mail dot
    com..... One two cavity cramer with large & cup HP pins
    16. twiggs1.....toyon.wiggs at gmail..... One four cavity cramer with all pins
    17. ValorsMinion.....strafeology (at) g mail (dot) come.....One two cavity cramer with large and cup HP pins
    18. 725.....mulliganm121 at aol dot com..... One two cavity solid
    19. midnight.....rwhyte at wi dot rr dot com.....One two cavity cramer with cup HP and blank pins
    20. JFE.....jfe (dot) oz (at) optusnet (dot) com (dot) au.....One two cavity cramer with all pins
    21. Leftiye.....tango golf romeo ate mambo snake nurse.....One two cavity with cup nose HP pin.
    22. gmsharps.....gmsharps at cs dot com..... One two cavity cramer with cup HP and blank pins
    23. bfuller14.....bfuller 0ne nine six one AT sbcglobal DOT net.....One two cavity cramer with all pins
    24. bushog.....Bushog......boo-haaa at hotmail dot com..... Three two cavity cramer with all pins
    25. Olevern.....midimizeatwildbluedotnet.....One two cavity solid
    26. Down South.....swactor at ymail dot com.....One two cavity cramer with all pins
    27. Beau Cassidy.....o rt ho NP B e a u at..yahoocom.....One two cavity cramer with large and cup HP pins
    28. hamour.....hank (underscore) austin (at) msn (dot) com.....One two cavity cramer with all pins
    29. micky blue.....bowtied (underscore) micky AT yahoo.....One two cavity cramer with all pins
    30. wool1.....wwoolson68 (at) gmail (dot) com.....One two cavity cramer with large and cup HP pins
    31. tygar.....tbrolliniATgciDOTnet.....One two cavity solid
    32. root.....armalite_ar50 (@) yahoo.com.....One two cavity cramer with all pins
    33. autodidact.....jbpaul (at) suddenlink (dot) net.....One four cavity cramer with all pins
    34. AlaskanGuy.....mark at figelski dot com.....One two cavity cramer with all pins
    35. rhadamanthos12.....kamisama12 at gmail dot com.....One four cavity cramer with all pins
    36. cainttype.....drctml(AT)yahoo(DOT)com.....One four cavity solid
    37. farmbif.....farmbif at aol dot com.....One four cavity solid
    38. CHD.....cody huck at gmail dot com.....One two cavity cramer with all pins
    39. micky blue.....bowtied underscore micky at yahoo.....One two cavity cramer with penta pins
    40. fivegunner.....fivegunner-at sbcglobal dot net.....One four cavity solid
    41. Highland Drifter.....highlander338(AT)gmail(DOT)com.....One two cavity cramer with large & cup HP pins and One two cavity solid
    42.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	BRP 375 H&H HP.JPG 
Views:	1915 
Size:	17.8 KB 
ID:	45389  
    Last edited by 45 2.1; 05-11-2014 at 11:12 AM.

  2. #2
    Boolit Master

    Rattlesnake Charlie's Avatar
    Join Date
    Nov 2007
    Location
    Los Alamos, NM
    Posts
    1,206
    45 2.1, thanks for taking this over. I'm just currently overwhelmed with moving and looking for a new job.

    And, since your posting just a short time ago, I've gotten word that some feral hogs in SE New Mexico have now put a hit out on me.

    2-cavity, all pin options, including for a solid.
    Last edited by Rattlesnake Charlie; 07-08-2012 at 02:30 PM.

  3. #3
    Boolit Master

    Join Date
    Apr 2011
    Location
    Chelsea, MA
    Posts
    532
    45 2.1,
    I'll go with the 2C cup point with a set of blank pins.
    cheeseburgerfriesandshake AT yahoo DOT com
    Thanks,
    Sam

  4. #4
    Boolit Grand Master
    btroj's Avatar
    Join Date
    May 2006
    Location
    Nebraska's oldest city
    Posts
    12,421
    I am in for a 2 cav Cramer with large round and cup point HP pins. I would prefer it drop at .378

    Bdtrojan at cox dot net

    I would be interested in seeing how big the different styles of HP cavities are. Not a big deal, more just curious.
    Last edited by btroj; 06-20-2012 at 06:11 PM. Reason: Added text

  5. #5
    Boolit Mold
    Join Date
    May 2011
    Location
    SW Idaho
    Posts
    7
    Put me down for a 2C with both hp pin sets @ .378". I can always punch it down to .377 later if that works better in my Whitworth.

    greg hope 1 (lower case, no spaces) at hot mail dot com
    Last edited by ghope; 06-21-2012 at 12:09 AM. Reason: forgot addy
    ~Greg

  6. #6
    Boolit Mold
    Join Date
    Jun 2012
    Posts
    15
    I would take a 4 cavity with all pin sets

    toyon.wiggs at gmail

  7. #7
    Boolit Buddy
    Join Date
    Feb 2010
    Posts
    135
    I am in for a 2 cavity, cup hollow point pins @.378.

    mhaley7030at aol dot com

  8. #8
    Boolit Man johnny356ER's Avatar
    Join Date
    Aug 2009
    Location
    NW New Jersey
    Posts
    78
    Count me in for a 2 cavity HP mould with all pin sets @ .378
    Thanks, johnny356ER
    johnandsuzi at msn dot com

  9. #9
    Boolit Buddy
    Ozarklongshot's Avatar
    Join Date
    Jun 2011
    Location
    NW Arkansas
    Posts
    193
    info for #11
    2 cav, large round pins
    Stoneaxe42 at yahoo dot com

    Thank you sir
    This will make 8 mihec molds for me. Woooo Hoooo
    Compromise is giving up something you are unwilling to fight for! ΜOΛΩΝ ΛΑΒΕ www.concealedcarryofarkansas.com

  10. #10
    Boolit Buddy
    Join Date
    Apr 2005
    Location
    Barrie Ont. Can.
    Posts
    173
    Please make mine 2 cavity with cup point. (ron-d678@hotmail dot com) any extra charge for shipping to Canada??

  11. #11
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by Ron.D View Post
    any extra charge for shipping to Canada??
    I don't think so.

  12. #12
    Boolit Buddy
    Join Date
    Aug 2006
    Location
    Melbourne, Australia
    Posts
    325
    45 2.1 - would it be possible to see the dimensions of the bullet for anyone looking to use this for some other 375 application. Thinking whether it might be suitable for the 375 Win and use a Lee FCD for the crimping.

  13. #13
    Boolit Master
    Join Date
    May 2007
    Posts
    3,850
    I'd like to get in on 2 cavity solid. Sign me up, coach.

  14. #14
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by 725 View Post
    I'd like to get in on 2 cavity solid. Sign me up, coach.
    I need your disguised e-mail address. Take a look at the list and you'll understand.

    Quote Originally Posted by JFE View Post
    45 2.1 - would it be possible to see the dimensions of the bullet for anyone looking to use this for some other 375 application. Thinking whether it might be suitable for the 375 Win and use a Lee FCD for the crimping.
    Should work fine in the 375 Win.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	BRP 375 H&H Exibit.JPG 
Views:	1839 
Size:	24.8 KB 
ID:	45692  

  15. #15
    Boolit Master
    Join Date
    May 2007
    Posts
    3,850
    45 2.1
    For the 2 cavity, solid mould, here is the email:

    mulliganm121 at aol dot com

    Thanks, 725

  16. #16
    Boolit Master
    Ed in North Texas's Avatar
    Join Date
    Feb 2011
    Location
    Texas
    Posts
    1,307
    Now that we've settled on weight, I'll go with the 2 cavity cup point with extra blank pins.

    Ed

  17. #17
    Boolit Master
    midnight's Avatar
    Join Date
    Sep 2009
    Location
    East Troy, WI
    Posts
    1,024
    Put me down for one 2 cavity, .378, with cup point and blank pins, brass. rwhyte at wi dot rr dot com

    Bob
    Last edited by midnight; 07-25-2012 at 04:34 PM. Reason: add email
    Si hostes visibilis, etiam tu

  18. #18
    Boolit Buddy
    Join Date
    Aug 2010
    Posts
    132
    Can we get one of these to drop WW at .379 ?

  19. #19
    Boolit Bub
    Join Date
    Apr 2011
    Location
    NC
    Posts
    35
    45 2.1
    (If you're still keepin track, I'd prefer the 0.378")

    gester01 charleyr01atattdotnet 4 cavity Cramer with large round pins

    This buy is still on, yes?

  20. #20
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by CATS View Post
    Can we get one of these to drop WW at .379 ?
    Quote Originally Posted by gester01 View Post
    If you're still keepin track, I'd prefer the 0.378". This buy is still on, yes?
    OK guys........ i'm going to recommend MiHec cut these so they will deliver a boolit a little over 0.378" ( which probably means 0.3785" as cast). A high antimony WW alloy will age larger if you let it sit unsized after casting so some of you have that option for a slightly larger boolit. That boolit growing in diameter depends on alloy and temperature its cast at. Water dropping them at that time helps on that.

    And Yes, this GB is still ongoing.

Page 1 of 11 12345678910 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check