Will a top punch be provided or offerded. Thanks
Will a top punch be provided or offerded. Thanks
Miha provides a top punch with his molds.
John
W.TN
What about handles? What type do I need?
"The right of the people to keep and bear...arms shall not be infringed. A well regulated militia, composed of the body of the people, trained to arms, is the best and most natural defense of a free country..." (James Madison, I Annals of Congress 434 [June 8, 1789])
Once the people find they can vote themselves money, that will herald the end of the republic.
Benjamin Franklin
The LEE 6 cavity handles will fit the MP molds. You can get them at Midway, grafs, any Lee dealer or order them direct fro Lee (a little more $)
Griz44Mag
Here in Texas, It's the Biggest, Best and Most Important (or we just won't talk about it)
I would like a 2 cavity HP with Penta pins
michaelDOTtiltonDOTvtATgmailDOTcom
I would like the 2 cavity HP. .454" if we get a choice of diameter as I size to .452" for my 1911 but .454" for my .45 Colts. As to which type of HP, which one is more likely to penetrate slightly deeper to make sure it has expansion in addition to being sure of sufficient penetration for hunting use? Thank you.
Lonegun1894 at yahoo dot com
Last edited by Lonegun1894; 07-15-2012 at 07:17 PM.
Thank you, Sir!
I passed my last psych eval, how bout you?
I'd like to get in on this one. Please put me down for one (1) 4 cavity solid,, .454 and one (1) 4 cavity Cramer hollow point with all pins, .454. Are blank pins available for the Cramer? Thank you for running this one.
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I. One died for your soul; the other for your freedom.
I copied your e-mail from another GB.... check it for correctness. No blank pins are offered as they would be very hard to match without a seam on a RN surface (and I won't provide that aggravation to the mould maker). That is why there are two offering, a solid and a HP
After some use with another mold with the penta pins I would like to add an extra set of large hp pins with my mold, thanks.
sent via hammer and chisel
need oversized powder funnels , PTX's or expanders ? just ask, I make 'em for most brands plus my own styles.
I would like to change mine to a 4 cavity solid if that will not be a problem
I will take a 4 cavity solid please. I have been away from here for a while. Need to get my feet wet again!
ddeaton at zoomtown dot com
I would like a four cavity mold with both pin sets. Dan underscore harben at msn dot com. Thank you.
Please put me down for:
1 each 4 cavity Cramer mold
1 set large HP pins
1 set penta HP pins
If possible, I'd like a set of solid pins.
email: sugdenjw at msn daht com
Thanks!
Jeff
Four cavity solid please
mlmaher at gmail dot com
Last edited by dogman; 08-02-2012 at 03:03 AM. Reason: update
I will take a four cavity hp with all pins
fuhr2003 at swbell dot net
If you're still taking orders, I will take a 4 cavity HP with both sets of pins.
gestes138 at gmail dot com
Thanks
I'd like one of the Cramer HP 4 cavity with both sets of pins.
Email is almostgem at comcast dot net
Thanks so much
Almostgem
John Gould
Sent from my rooted Kindle Fire running Ice Cream Sandwich.
Last edited by almostgem; 08-01-2012 at 08:29 AM. Reason: email address update
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |