MiHec 452374 brass four cavity solid or hollow point

[fatelvis]

1 pc. 4 cav solid.
kimndave99 (at) comcast (dot) com

[arcticbreeze]

I would like (1) 4cav solid please.

mmill3550 (at) gmail (dot) com

[GMT210]

45 2,1,

I am #11 on the list, 1 mold at .454 solid 4 cav.
mabennett at neo dot rr dot com

[jethunter]

Hi, clarification on my order, #19 on the list. I'd like 1 spare set of large pins, no penta pins at all. Thanks!

[cavemike]

please add me to the list

one solid 4 cavity brass mould

cavemike at netzero dot com

[fivegunner]

I`ll buy a 4 cavity solid . fivegunner at sbcgolbal.net. and a big thank you for hosting this Sir.!!

[sergraf]

Add me to the list for a HP mould.
sergio underscore rafanan at yahoo dot com
Will take all pins

[AnthonyB]

One four cavity HP with all pins.
anthonybennett at comcast dot net

[45 2.1]

Add me to the list for a HP mould.
sergio underscore rafanan at yahoo dot com

You need to edit your post to say which of these pin options you want.
Pin options: 1) large HP, 2) penta HP
Your choices are large, penta or both. One pin set is included in the mold... your choice.

[86LG4T5]

I'd like a 4 cavity HP with 4 large HP pins.

What's the weight on this? I think the original Lyman 452374 HP was 180 grains. Should this be a close match?

Thank you!

[dragon813gt]

Put me down for a four cavity with penta pins

dragon813gt at yahoo dot com


Brought to you by TapaTalk.

[Rdbronco]

I will take a four cavity hp with all pins

richatbroncoedotcom

[Shakey Jakey]

4 cav solid putzieataoldotcom.

[jethunter]

Please look at the list to see if that is what you want..........

List is correct. What is the weight of these bullets?

[MT Chambers]

Jethunter: Ya sure are planning alot of casting!!! Good for you......Ben

[jethunter]

Jethunter: Ya sure are planning alot of casting!!! Good for you......Ben

Hi Ben. One set is for me and one for a buddy that "don't do that internet stuff".

[Johnny_Cyclone]

one 4cav solid
one 4cav hp with Penta Pins, and Large Pins

robert spot simon et cox spot net

[GMT210]

45 2.1,

Have you calculated the weight of the HP version, and what diameter would the HP be.

GMT

[40Super]

The base bullet I believe is 230gr. With the hp I'd suspect it will be 210gr to 215gr. At lightest and with a big hp it could maybe be down to 200gr but it doesn't look to be that big of a cavity.

[45 2.1]

Hi Ben. One set is for me and one for a buddy that "don't do that internet stuff".

45 2.1,

Have you calculated the weight of the HP version, and what diameter would the HP be.

GMT

Solid = 229 gr. as cast
HP = 212 gr. as cast
HP diameter at nose = 0.22"