Nothing known yet on when it's closed, but if you wait too long you'll have to try to get an extra.........
Thread updated.............
Nothing known yet on when it's closed, but if you wait too long you'll have to try to get an extra.........
Thread updated.............
I would like:
1 of the four cavity solids and
1 of the four cavity cramer hp with the Large hp pins and Penta pins.
vaughan61 at cox dot net
I'm new to this site but if it's possible I would like to order one 4 cavity solid.
darkh2odiver (at) hotmail [dot] {com}.
Thank you
I'd like a 4 cavity solid please.
mlmaher at gmail dot com
Put me down for one Four cavity solid.
brucerfrechette at yahoo dot com
ammohead
Bruce R Frechette
665 Joel Way
Fallon, NV 89406
disregard...gonna stay on the list anyway, it may work out cause it is taking a while anyway...dont remove me yet
Last edited by Captain_Howdy; 04-17-2013 at 08:48 PM.
Please add me to the list. One 4 cavity Cramer with large and penta pins. Do you have an ETA? How do I pay?
Please change my order (#19 on the list) to:
1x 4C solid; and 4C HP mold with large HP pins; no extra pins.
Thanks
I don't mean to be a pain, but could my order please be modified to include all the pin options and the blank pins to cast solids also? Thanks. Cant wait til this one gets made, cause it'll save me money when I can quit buying HPs.
I passed my last psych eval, how bout you?
I'm in for a 4 cavity kramer round pins and blank pins.
bradhurt2atyahoodotcom
Thanks
Brad Hurt
I would like:
1 of the four cavity cramer hp with the Large hp pins and Penta pins.
reesestoops at yahoo dot com
OK.... please note that there is NO blank pin option on this GB. It is a round nose and a blank flat nose pin would probably be very difficult to make properly. If we are lucky, he might make it, but that is no promise that it will be that way. Please edit your choices.
Thread somewhat updated.............
I'll take 1 2 C Large HP pins, if he does a RF then I'll take solid pin as well
magnut44 at gmail dot com
I'd like a 4 cavity HP plain base mold with all pin options.
wwoolson68 (at) gmail (dot) com
45 2.1,
I apologize. I was hoping to be able to make solids also, but am in this for the sake of being able to cast my own HPs so just whatever is easiest for the maker and with all the pin options he chooses to make is great for me. I'm just glad we have someone with the skills and willingness to do this because, frankly, I'm getting tired of paying extra for HPs so this is a great solution.
I passed my last psych eval, how bout you?
Please add me to the list. DLOBERG AT BELLSOUTH.NET
Qty 1 , Brass, four cavity, solid.
Many thanks Rod
Please put me down for 2C, HP, both pins.
wadestep (atttt) yah00 -dot-com
PS - if round or flat pins get to be an option, I'd be interested in those, also. If not, no problem.
Last edited by Wadestep; 04-24-2013 at 03:59 PM. Reason: added last line
GRIZ44 number 36 on the list.
After 11 months, I give up.
Please remove me from the list.
If there are any extras when this finally does end, maybe I'll try and get one then.
Griz44Mag
Here in Texas, It's the Biggest, Best and Most Important (or we just won't talk about it)
Thread updated............
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |