WidenersRepackboxLoad DataInline Fabrication
RotoMetals2Lee PrecisionSnyders JerkyMidSouth Shooters Supply
Reloading Everything Titan Reloading
Page 1 of 34 1234567891011 ... LastLast
Results 1 to 20 of 661

Thread: MiHec 452374 brass four cavity solid or hollow point

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    MiHec 452374 brass four cavity solid or hollow point

    MiHec 452374 brass four cavity solid or two or four cavity hollow point
    This is a sign-up thread for a copy of the Lyman 452374 hardball design........ It casts out at 0.454" just as the Lyman original does and sizes easily to 0.452". The original has shot very accurately in everything we've tried it in.

    This GB is Closed

    For the four cavity solid, the price is $95 with plus $15 shipping.

    Addition to choices:
    For the two cavity cramer HP, the price is $85 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

    For the four cavity cramer HP, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.
    Pin options: 1) large HP, 2) penta HP, 217 gr.

    Please give your disguised e-mail address (you won't be on the list for an invoice unless you do so) and the number of molds you want.

    Look here for GB mold production updates:
    http://castboolits.gunloads.com/showthread.php?t=154992

    The discussion thread is here:
    http://castboolits.gunloads.com/showthread.php?t=144665

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Interest list from the discussion thread and sign up list:If there isn't anything after your handle, then you haven't ordered yet.

    1. Dschuttig.....Dschuttig at yahoo dot com.....One 4 cavity cramer with the large and penta HP pins
    2. ammohead.....Bruce R Frechette at yahoo dot com. all lower no spaces..... One 4 cavity solid
    3. Bodydoc447.....BodyDoc447 (at) AOL (dot) com...... One 4 cavity solid
    4. Johnny Cyclone..... robert spot simon et cox spot net..... One 4 cavity solid & One 4 cavity cramer with the large and penta pins
    5. Chucky64.....jccham64 {at} yahoo {dot} com..... One 4 cavity cramer HP plus the extra penta pins.
    6. flydad.....wd dot mcclendon at G mail dot com.....One 4 cavity solid with one set of handles
    7. BoolitBill.....tanstaafldds (at) aol (dot) com..... One 4 cavity solid and One 4 cavity cramer with the large pins
    8. fivegunner.....fivegunner at sbcgolbal.net.....One 4 cavity cramer with the large HP pins
    9. Hone Heke.....sammanderson (at) gmail-dot com.....One 4 cavity solid
    10. Thinktwicez71.....devilsace at hotmail dot com .....One 4 cavity solid with One set of handles
    11. GMT210.....mabennett at neo dot rr dot com.....One 4 cavity solid & One 4 cavity cramer with two sets of the large pins and one set of solid pins
    12. buckwheatpaul.....paulfletcherAThughesDOTnet.....O ne 2 cavity Cramer with large pins
    13. reload em.....reload40s (at) gmail (dot) com.....One 4 cavity solid & One 4 cavity cramer with the large HP pin
    14. Lizard333.....Lizard333(at)Mac(dot)com.....One 4 cavity cramer with penta pins
    15. alamogunr.....alamogunr(at)charter(dot)net.....One 4 cavity solid
    16. MrWolf.....ronyulick (at) verizon (dot) net.....One 4 cavity solid & One 4 cavity cramer with large and penta HP pins and Two sets of handles
    17. cja245.....cja245 at gmail dot com..... One 4 cavity cramer with large and penta HP pins
    18. BigHoss74.....Bri2906 at aol dot com.....One 4 cavity solid
    19. jethunter.....j3526134 at telus dot net.....One 4 cavity solid and One 4 cavity cramer with the large pins
    20. taminsong.....taminsong at yahoo dot com.....One 4 cavity solid
    21. Ravenhawk57.....joe_higginsATattDOTnet.....One 4 cavity solid
    22. bigmike13.....michael(dot)tilton(dot)vt(at)gmail(d ot)com.....One 4 cavity solid
    23. arcticbreeze.....mmill3550 (at) gmail (dot) com.....One 4 cavity solid
    24. cavemike.....cavemike at netzero dot com.....One 4 cavity solid
    25. sergraf.....sergio underscore rafanan at yahoo dot com.....One 4 cavity cramer with large and penta pins and a set of handles
    26. AnthonyB.....anthonybennett at comcast dot net.....One 4 cavity cramer with all pins
    27. 86LG4T5.....morrisonjohnaATyahooDOTcom.......One 4 cavity cramer with large pins
    28. dragon813gt.....dragon813gt at yahoo dot com.....One 4 cavity cramer with all pins
    29. Rdbronco.....richatbroncoedotcom.....One 4 cavity cramer with all pins
    30. Shakey Jakey.....putzieataoldotcom.....One 4 cavity solid
    31. mortre.....Jason dot k dot copas at gmail dot com.....One 4 cavity cramer with large & penta pins
    32. DarthTater.....headamp (at) gmail (dot) com.....One 4 cavity solid
    33. Echo.....edsanford at cox dot net.....One 4 cavity solid
    34. linotype.....linotype AT uplink dot net.....One 4 cavity solid
    35. critterkillr.....krslates at live dot com.....One 4 cavity cramer with all pins &
    One 4 cavity solid
    36. 44 mag nut.....magnut44 at gmail dot com .....One 2 cavity cramer with large pins
    37. Landric.....Landric (at) aol (dot) com.....One 4 cavity solid
    38. hoagie214.....mjardcore at hotmail dot com.....One 4 cavity solid
    39. Lonegun1894.....Lonegun1894 at yahoo dot com.....
    One 2 cavity cramer with large and penta pins
    40. chprplt.....Chprplt. Exit13fiveataoldotcom.....One 4 cavity cramer with all pins & One 4 cavity solid
    41. ddeaton.....ddeaton at zoomtown dot com.....One 4 cavity solid
    42. 44 Shooter.....ajspan at msn dot com.....One 4 cavity solid
    43. Iron Mike Golf.....sugdenjw at msn daht com.....One 4 cavity Cramer with large and penta pins. Solid pins requested
    44. dogman.....mlmaherATgmailDOTcom.....One 4 cavity solid
    45. wickerbill.....billweaver2 at juno dot com.....One 4 cavity Cramer with large pins
    46. RadioactiveMarine.....KNAACK (at) ROADRUNNER (dot) COM..... One 4 cavity Cramer with large and penta pins
    47. almostgem.....jfgould at Gmail dot com.....One 4 cavity Cramer with large and penta pins
    48. castalott.....gardensngoatsATgmailDOTcom.....One 4 cavity solid
    49. BigMan.....ddetrick at Columbus dot rr dot com..... One 4 cavity Cramer with large and penta pins
    50. johnvid.....jvidmar at windstream dot net.....One 4 cavity solid
    51. FLYCUTTER.....runderscorekarkatattdotnet.....One 4 cavity Cramer with all pins
    52. AZBrian.....sellsell(at)cox(d0t)net.....One 4 cavity Cramer with large and penta pins
    53. Frozone.....jconnell <location> gci <spot> net .....One 4 cavity solid
    54. rnelson11.....rnelson11 (at) chesnet (dot) net.....One 4 cavity solid
    55. gmsharps.....gmsharps at cs dot com.....One 4 cavity Cramer with large and penta pins
    56. slaird.....slaird at cox dot net.....One 4 cavity solid
    57. ScottR.....scott.rogersonatgmaildotcom.....One 4 cavity Cramer with large and penta pins
    58. Travtastik.....Nobodystravis (at) gmail dot com.....One 4 cavity solid and One 4 cavity cramer with the large and penta pins
    59. funshooter.....weldinspectorATearthlinkDOTnet..... One 4 cavity Cramer with all pins with One set of handles
    60. captain-03.....captain-03(at)comcast(dot)net.....One 4 cavity solid
    61. Salmon-boy.....Salmon hyphen boy using comcast for net.....One 4 cavity solid and One 4 cavity cramer with the large pins
    62. TXSlade.....andrew.wilson33 at gmail dot com.....One 4 Cavity Cramer with large and penta pins AND One 4 cavity solid.
    63. huntnfish72.....Billyv3 at newnorth.net..... One 4 cavity Cramer with all pins
    64. Alchexn.....alchexn at gmail dot com..... One 4 cavity solid and One 2 cavity cramer with the large and penta HP pins
    65. Danner.....gstaxidermy at sbcglobal dot net.....One 4 cavity Cramer with large and penta pins and a set of handles
    66. jtatum1.....jtatum1 at yahoo dot com.....One 4 cavity Cramer with large and penta pins
    67. SP5315.....wmclark AT email DOT com.....One 4 cavity Cramer with large and penta pins
    68. Jasper.....JWHirtle AT comcast DOT net .....One 4 cavity solid
    69. Carlsoncaster.....scottredmondor (at) gmail (dot) com..... One 4 cavity solid and One 4 cavity Cramer with large and penta pins
    70. Blackcypress.....brhyne68 at aol dot com.....One 2 cavity Cramer with large and penta pins
    71. Capt. Methane.....ke4vmc AT gmail Dot com.....One 4 cavity solid
    72. TMSCU.....Tmoyer1952 at yahoo dot com......One 4 cavity Cramer with large & penta pins and a set of handles
    73. labdwakin......louisherbert (at) hotmail (dot) com......One 4 cavity solid
    74. just10mm.....just10mm at gmail DOT com......One 4 cavity Cramer with large and penta pins and a set of handles
    75. harley45.....Eric at whitetigerblog dot com.....One 4 cavity Cramer with large pins
    76. Hard Cast.....patrickreed1987 (at) hotmail (dot) com..... One 2 cavity Cramer with large and penta pins plus a set of handles
    77. riderrick.....riderrick (at) hotmail (dot) com.....One 4 cavity solid
    78. 10-x.....dcrcpr at comcast dot net.....One 2 cavity Cramer with large and penta pins
    79. GL49.....larrybohn(at)ashlandhome(dot)net.....One 4 cavity solid and One 4 cavity Cramer with large and penta pins
    80. IIJSavoy.....iijsep (at) gmail (dot) com.....One 2 cavity Cramer with large & penta HP and RN blank pins
    81. Kull.....dlvanmat (aht) dcacable (dought) net.....One 4 cavity solid and one set of handles
    82. Wayne Smith.....wlspsyd at aol dot com.....One 4 cavity solid
    83. Scramjet.....tjkfarm at yah (dot) com.....One 4 cavity Cramer with large and penta pins
    84. icecold.....icecold at izoom dot net.....One 4 cavity solid
    85. Whistler.....jonas.bjork84 at gmail dot com..... One 4 cavity solid and One 4 cavity Cramer with large pins... Note:If the RN pins succeed I would like to change my order to two 4-cav large HP instead of one HP and one solid.
    86. cs86.....chris_sones_1 {at} hot mail {dot} com.....One 2 cavity Cramer with all pins and One set of handles
    87. TxAg2010.....thecros (at) gmail (dot) com.....One 4 cavity Cramer with penta pins
    88. Vtnam68.....timr_at_olypen_dot_com.....One 2 cavity Cramer with one large and one penta pin
    89. hotbrew.....guy.jones at gmail dot com.....One 4 cavity solid..NOTE: to be replaced with One 4 cavity Cramer with large HP pins if there is the ability to turn out RN solids with them as per the "experiment"
    90. tayous1.....nathancampbell79 at gmail dot com.....One 4 cavity Cramer with large and penta pins
    91. Nabind.....drs (dot) 1964 (at) yahoo (dot) com.....One 4 cavity Cramer with large and penta pins
    92. captaint.....roctober5thatgmaildotcomm.....One 2 cavity Cramer with large and penta pins
    93. jimgun.....jgruver2013 at gmail dot com.....One 4 cavity Cramer with large and penta pins
    94. Hardball26.....aardvark 13 at hotmail dot com.....One 2 cavity Cramer with large and penta pins
    95. lup.....Rstaab (at) Panix dot com.....One 4 cavity Cramer with large and penta pins
    96. vaughan61.....vaughan61 at cox dot net.....One 4 cavity Cramer with large and penta pins and One 4 cavity solid
    97. Darkh2odiver.....darkh2odiver (at) hotmail [dot] {com}.....One 4 cavity solid
    98. dogman.....mlmaher at gmail dot com.....One 4 cavity solid
    99. ammohead.....brucerfrechette at yahoo dot com.....One 4 cavity solid
    100. ammo223..... need e-mail address ..........One 4 cavity Cramer with large and penta pins
    101. gunsbrad.....bradhurt2atyahoodotcom.....One 4 cavity Cramer with large pins
    102. Stoopy.....reesestoops at yahoo dot com.....One 4 cavity Cramer with large and penta pins and One set of handles
    103. wool1.....wwoolson68 (at) gmail (dot) com.....One 4 cavity Cramer with large and penta pins
    104. Rodfac.....DLOBERG AT BELLSOUTH.NET.....One 4 cavity solid
    105. Wadestep.....wadestep (atttt) yah00 -dot-com.....One 2 cavity Cramer with large and penta pins
    106. fatelvis.....kimndave99 (at) comcast (dot) net.....One 4 cavity solid
    107. Plan IX.....awebb (at) teamwebb (dot) net.....One 4 cavity Cramer with large pins with One set of handles
    108. 3gunmatch.....3gunmatch at charter dot net.....One 4 cavity solid
    109. Mikadosoft.....mikadosoft {at} comcast [dot] net.....One 4 cavity Cramer with large and penta pins and One set of handles
    110. kayak1.....Jason atatat kates dotdot org.....One 4 solid and One set of handles
    111. Oreo.....jdecar1 at hot mail dot com.....One 4 cavity Cramer with all pins
    112. Henryman.....kevin dot gehlhausen at twc dot com.....One 4 cavity Cramer with all pins
    113. sparkz.....Sparkz1000_AT_gMail_DOTT_ Com..... One 2 cavity Cramer with large and penta pins plus one set of handles
    114. bwgdog.....barrywg oodwin at gmail dot com.....One 4 cavity solid with One set of handles
    115. Rusty W.....russellwoolever at sbcglobal dot net.....One 2 cavity Cramer with penta pins
    116. 2ndAmendmentNut.....willthekid45(at)yahoo(dot)com. ....One 4 cavity solid
    117. Shedhunter.....canerod1300(at)hotmail(dot)com..... One 4 cavity Cramer with large pins
    118. Sgtonory.....Onory1 at Gmail dot com.....One 2 cavity Cramer with large pins
    119. NoZombies.....tonyatnozombiesdotcom.....One 4 cavity Cramer with penta pins
    120. .45Cole.....45stingray|at| gmail|dot|com.....One 4 cavity Cramer with penta pins
    121. HighHook.....Pvolkman3 at gmail dot com.....One 4 cavity Cramer with large pins
    122. B.C.Jay.....cjsahlstrom (hat) telus (doht) net .....One 4 cavity Solid
    123. Stevtrains.....Stevtrains at aol com.....One 4 cavity Cramer with large & penta pins
    124. Bigdaddyg.....joshquerin AAAATTTTTTT hotmale DOTTTT commmm..... One 4 cavity Cramer with all pins
    125. OuchHot!.....rdhcai AT msn DOT com.....One 4 cavity Solid
    126. Ironwood.....Ironwood of evergreen at yahoo dot com.....One 4 cavity Cramer with large and penta pins and One set of handles
    127. ol skool.....gsv nine-eight-seven at operamail dotcom.....One 4 cavity Cramer with large and penta pins and One set of handles (If MiHec has to make an extra set of pins to get a RN, I will gladly volunteer the extra $16 for the RN pins)
    128. Bigboredad.....nschek214 at hot mail dot com.....One 2 cavity Cramer with penta pins
    129. Tarkid.....kivafolks-at-gmail-dot-com.....One 4 cavity Cramer HP with large HP pins
    130. Humbo.....bardisattva at gmail dot com.....One 4 cavity Cramer with large and penta pins
    131. CPL Lou.....louiestanfield (at) gmail (dot) com.....One 4 cavity Solid
    132. remy3424.....scottr at frontiernet dot net.....One 4 cavity Cramer with large and penta pins
    133. mouldernt.....mouldernt at gmail dot com.....One 4 cavity Cramer with large and penta pins and One set of handles
    134. tacoma.....hectorATchameleonusaDOTnet.....One 4 cavity Cramer with large and penta pins
    135. rhadamanthos12.....kamisama12 at gmail dot com.....One 4 cavity Cramer with large and penta pins and One 4 cavity Solid
    136. DHC.....icpilot [at] yahoo [dot] com.....One 4 cavity Cramer with large and penta pins and One set of handles
    137. Visible Miss.....bargentos at msn dot com.....One 4 cavity Solid and One 2 cavity Cramer with large and penta pins
    138. Mohillbilly.....CurleyQlink at Hotmail dot com.....One 4 cavity Cramer with large & penta HP and the RN blank pins
    139. ggb3.....gbickel3 at gmail dot com.....One 4 cavity Solid and One 2 cavity Cramer with all pins
    140. Viagrow.....brian_tnd (at) hotmail (dot) com.....One 4 cavity Cramer with large and penta pins
    141. mckenziedrums.....Mckenziedrums at gmail dot com.....One 4 cavity Cramer with all pins
    142. monadnock#5.....bemis kd (at) ne {dot} rr {dot} com.....Two 4 cavity Solids and One 4 cavity Cramer with all pins
    143. DuncanFTGC/SS.....po216ata at yahoo dot com.....One 4 cavity Cramer with large and penta pins and One 4 cavity Solid and One set of handles
    144. mold maker.....alicejerry at charter dot net.....One 4 cavity Cramer with all pins
    145. randoma.....cs{at}voltmail{dot}com.....One 4 cavity Cramer with large and penta pins
    146. taugust.....g99jeb (at) aol (dot) com.....One 4 cavity solid
    147. woodman51jfk.....woodman of '51 @j and s enterprises ( dot ) com.....One 4 cavity Cramer with all pins
    148. tygar.....tbrolliniATgciDOTnet.....One 2 cavity Cramer with all pins (NOTE; if the solid pins work make it a four cavity. If the solid pins don't work I want the 2 cavity HP above & a 2 cavity solid)
    149. Bohica793.....bohica793ATgmailDOTcom.....One 2 cavity Cramer with all pins
    150. Bryan Marino.....nikonguy4570 at sympatico.ca.....One 4 cavity solid
    151. photomicftn.....bclosius at myacc dot net.....One 2 cavity Cramer with all pins
    152. skeet028.....gunner at tctwest dot net.....One 2 cavity Cramer with large pins
    153. TurksandKaos.....gdubytz at live dot com.....One 4 cavity Cramer with all pins (option of purchasing a second of the same, depending on the completion date... contact at that time)
    154. Scubabrian.....Castboolits(at)scubabrian(dot)com.. ...One 4 cavity Cramer with all pins & One 4 cavity solid
    155. bushog.....boo-haaa at hotmail dot com.....One 4 cavity Cramer with all pins and Two 4 cavity solids
    156. tomme boy.....m t heath at mchsi dot com.....One 4 cavity Cramer with large pins

    Edit: MiHec is doing an experiment here on the blank side of the pins by trying to do a RN blank. Whatever he does on that (whether its on the HP pins or on a seperate pin) would be included with a cramer order.
    Attached Thumbnails Attached Thumbnails 452374 Mod HP.JPG  
    Last edited by 45 2.1; 02-08-2014 at 10:13 PM.

  2. #2
    Boolit Buddy


    mktacop's Avatar
    Join Date
    Dec 2011
    Location
    Greenville TX
    Posts
    374
    I'm in! Any idea on delivery schedule? Gotta start saving up.

    Please put me down for a solid mold as well as a HP mold with large HP pins. Buddylivingston @t y@hoo dot com
    USAF Retired

    WAR EAGLE!

    "A government that does not trust its law abiding citizens to keep and bear arms is its self unworthy of trust."
    - James Madison

  3. #3
    Boolit Master
    Lefty SRH's Avatar
    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    2,172
    Put me down for a 4C solid brass mold
    schockley at bellsouth dot net

  4. #4
    Boolit Master
    Join Date
    Mar 2005
    Posts
    952
    BodyDoc447 (at) AOL (dot) com

    four cavity solid mould, please.

  5. #5
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    4,509
    4 cavity solid.
    alamogunr(at)charter(dot)net
    John
    W.TN

  6. #6
    Boolit Buddy BoolitBill's Avatar
    Join Date
    Dec 2008
    Location
    West Texas
    Posts
    227
    I will take 1 of the four cavity solids and 1 of the four cavity cramer hp with the large hp pins.

    tanstaafldds (at) aol (dot) com

  7. #7
    Boolit Buddy taminsong's Avatar
    Join Date
    Aug 2008
    Location
    Philippines
    Posts
    257
    1pc 4cavity solid for me.
    taminsong at yahoo dot com

    when is the due for the money?

    I've been waiting for a long time for it.
    My Lyman is undersized!

  8. #8
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by taminsong View Post
    when is the due for the money?
    I've been waiting for a long time for it. My Lyman is undersized!
    After the GB closes, MiHec will e-mail an invoice. Just before the molds are delivered.

  9. #9
    Boolit Master
    Lefty SRH's Avatar
    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    2,172
    Quote Originally Posted by taminsong View Post
    1pc 4cavity solid for me.
    taminsong at yahoo dot com

    when is the due for the money?

    I've been waiting for a long time for it.
    My Lyman is undersized!
    My Lyman won't drop one boolit from the mold. The other 3 FALL OUT when I open it! And they are just a smidge small.

  10. #10
    Boolit Master

    fatelvis's Avatar
    Join Date
    Jan 2006
    Location
    Mokena, IL
    Posts
    759
    Do you take Paypal for payment?
    I shoot so that I can handload.

  11. #11
    Boolit Master
    Lefty SRH's Avatar
    Join Date
    May 2011
    Location
    Athens, AL
    Posts
    2,172
    MiHa takes Paypal for payment, he will call for it when its time.

  12. #12
    Boolit Master 40Super's Avatar
    Join Date
    Dec 2011
    Location
    1/2mile from nowhere
    Posts
    754
    Put me down for the hollow point w/ penta pins,,, march 70 jeff (at) frontier (dot) com
    sent via hammer and chisel

    need oversized powder funnels , PTX's or expanders ? just ask, I make 'em for most brands plus my own styles.

  13. #13
    Boolit Master
    Join Date
    Sep 2008
    Location
    NY/VT Border
    Posts
    527
    Put me down, really need guesstimate date so I don't get 6 molds "maturing" at once. 4 cavity with one set round HP pins. Dschuttig at yahoo dot com.
    Need advice fixing a coleman appliance? Maybe I can help!

  14. #14
    Boolit Master

    Lizard333's Avatar
    Join Date
    Feb 2011
    Location
    Flagstaff AZ
    Posts
    1,650
    Lizard333(at)Mac(dot)com
    HP with penta HP option.

    Cool!!
    "The right of the people to keep and bear...arms shall not be infringed. A well regulated militia, composed of the body of the people, trained to arms, is the best and most natural defense of a free country..." (James Madison, I Annals of Congress 434 [June 8, 1789])


    Once the people find they can vote themselves money, that will herald the end of the republic.
    Benjamin Franklin

  15. #15
    Boolit Buddy
    Join Date
    Apr 2009
    Location
    NE Ohio
    Posts
    191
    45 2.1,

    Would the HP design have a small metplat when cast as a solid or would it have a round nose? I know that this is a difficult design to be able to cast a solid and HP, I'm just trying to picture what it look like and how it would cast.

    Thanks

    GMT

  16. #16
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Would the HP design have a small metplat when cast as a solid or would it have a round nose? Now that was a problem I tried to solve. I erred on the side of ease to the mold maker there. If the HP pin was reversed, it would make it a flat nose (with probably ragged edges due to the curve and pin base). If MiHec made a blank pin, the same thing might happen. Making a RN pin to replace the HPs would be DIFFICULT to match up (a thousandth is a whole lot there). I really intended by the choices that this GB would either be a solid or one of two types of HPs. The machining to have a really well matched flat nose, I think, is a little too much to ask for the price. I know that this is a difficult design to be able to cast a solid and HP, I'm just trying to picture what it look like and how it would cast.

  17. #17
    Boolit Bub
    Join Date
    Apr 2010
    Location
    Smoky Mts In east Tennesse
    Posts
    49
    Put me down for one 4 cavity solid. Ravenhawk57@aol.com

  18. #18
    Boolit Buddy
    Join Date
    Apr 2009
    Location
    NE Ohio
    Posts
    191
    45 2.1,

    Thanks for the claification, that's what I was thinking, but I wanted to make sure.

    As I understand it, this GB is for either a 230 grain solid 4-cav or a 220ish grain cramer HP 4-cav with out reversible pins, that only makes HP's .

    Thanks again for the clarification!

    GMT

  19. #19
    Boolit Buddy
    Join Date
    Jun 2011
    Location
    Alberta
    Posts
    440
    45 2.1,

    I'm #19 on the list, please add this info:

    jethunter, j3526134 at telus dot net

    1. (QTY-2 moulds) 4C HP + 1 extra set of HP pins
    2. (QTY-2 moulds) 4C solid
    Last edited by jethunter; 06-05-2012 at 08:51 PM.

  20. #20
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by jethunter View Post
    45 2.1,

    I'm #19 on the list, please add this info:

    1. (QTY-2 moulds) 4C HP + 1 extra set of HP pins
    2. (QTY-2 moulds) 4C solid
    Please look at the list to see if that is what you want..........
    Last edited by 45 2.1; 06-06-2012 at 05:03 PM.

Page 1 of 34 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check