NOE Copy of RCBS 82054 bullet mould .45-500-FN for 45-70

[jimgun]

i really want the a 4 cavity copy of the rcbs 405, but maybe next time. if this will drop at weight using straight wheel weights, count me in for a 4cavity. thanks jim

[338RemUltraMag]

Bump for a boolit I want

[CPL Lou]

I'd like one of these.
3 cavity GC, .460", brass please.
I would go for aluminum as well, but in a two cavity.

[colt1960]

I would be in for a 4 or 5 cav. gas check!

[lup]

I'd be interested in a 5 cavity plain base.

[Eastwood]

I'm interested in a 2 cavity gc .460/461 brass. If no brass option then a 4 cavity aluminum.

[quasi]

I believe NOE has permission to run Ranchdog Boolit designs. Didn't Ranchdog offer a 500 gr .460 design?

[colt1960]

The largest 45-70 bullet that I know of was the 425gr-.460 mold. I still have mine. I beleave all Ranchdog molds were tumble lube designs.

[Dubbel El]

I would be interested in a 4C GC RG4 with HP and plug pins in either aluminum or brass if such were offered.

[CPL Lou]

Shameless BUMP !

CPL Lou

[CPL Lou]

Btt !

[CPL Lou]

Looks like this one is not going to get off the ground, too bad

CPL Lou

[SwedeNelson]

If some one can send a sample
We can have them in 5 or 6 weeks
Can start a sign-up thread any time

The new and improved NOE
Swede Nelson

[SwedeNelson]

No samples

[Just Duke]

No samples

I'm working on it sir. http://castboolits.gunloads.com/show...44#post2641444

[CPL Lou]

THANK YOU DUKE !

CPL Lou

[myg30]

Pm sent, Mike

[CPL Lou]

Have my fingers crossed !
I would much rather get this boolit mold from NOE than take a chance on the quality of the OEM.
If NOE makes any single cavity mold(s), I'll buy it !
Found out the hard way that multiple cavity large caliber molds have a tendency to get too hot in the area between cavities.

CPL Lou

[bjklme]

I sent two bullets from this mold to NOE to help the cause here. I'd like this in HP, and that is a unique feature NOE is excellent at offering. This would be the perfect mold for two different HP pins, a typical NOE HP and another one ~1.5x deeper. I have used the RCBS version a lot for hunting feral hogs, and load it at ~1200 fps in Win 1886 rifles. It has massive over-penetration, had one that penetrated 5 feet of pig diagonally. There is a lot of potential for expansion plus penetration, and experimenting with two HP depths would be fun.

[Just Duke]

I sent two bullets from this mold to NOE to help the cause here. I'd like this in HP, and that is a unique feature NOE is excellent at offering. This would be the perfect mold for two different HP pins, a typical NOE HP and another one ~1.5x deeper. I have used the RCBS version a lot for hunting feral hogs, and load it at ~1200 fps in Win 1886 rifles. It has massive over-penetration, had one that penetrated 5 feet of pig diagonally. There is a lot of potential for expansion plus penetration, and experimenting with two HP depths would be fun.

Thank you for the contribution sir.