has any one used the 45cal speer plastic bullets in 45 LC cases? speer says the 45 cal is for 45acp only, I don't see why they won't work in the 45lc case.thanks guys
has any one used the 45cal speer plastic bullets in 45 LC cases? speer says the 45 cal is for 45acp only, I don't see why they won't work in the 45lc case.thanks guys
Heck yeah they work. However, once the primer fires it jumps back a little and will tie up the cylinder. And don't tape an IPSC cardboard target to a cheap apartment door. You'll find a bunch of holes when you take down your target.
There's many a slip 'twixt the cup and the lip.
If you drill out the flash hole with an 1/8" drill on a few cases, the primers won't back out and lock up the cylinder.
Now about that door...............
Hope this helps.
Fred
thats what I needed to know, tomorrow I am going try to make a few glue boolits, saw it done on you tube, he just filled the mould, then cut the sprues, no putting in a freezer or any thing else. thank you
I use glue sticks 1/2 ln.I load them as wadcutters.See Ammosmith.com site
I have a few Colt cases that had small neck splits. I trimmed them down, opened up the flash hole and started banging away. YMMV
Matt
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |