MiHec 2 or 4 cavity brass 45 RCBS Cramer HP
This is a new design based on the RCBS cowboy boolit. This will be a two or four cavity, single crimp groove, cramer brass HP mold that is suitable for the 45 ACP, 45 AR and other 45 caliber handguns. It will cast at 0.454".
This Thread is Closed
The following is the discussion thread.
http://castboolits.gunloads.com/show...94#post1645294
We will need fifteen to commit to this. We will run this until we get the number we need or more.
For the two cavity mold, the price is $85 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.
For the four cavity mold, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.
If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.
Pin options: 1) large HP, 2) penta HP, 3) blank pin for flat nose
Please list your Forum name and your disguised e-mail address in suitable form and the pin options you think you want along with the number of molds.
Here is a list of interested members as well as the sign-up list:
If there isn't anything after your handle, then you haven't ordered yet.
- Nabind.....Drs dot1964 At yahoo dot com.....One 4 cavity mold with all pins
- BK7saum.....bradleyk4860 AT gmail DOT com..... One 4 cavity mold with all pins
- alamogunr.....alamogunr(AT)charter(DOT)net..... One 2 cavity mold with large and blank pins.
- gcsteve.....sbarker1 at stny dot rr dot com..... One 2 cavity mold with all pins
- Jeff_WNY.....castboolits AAATTT lockport DDDOOOTTT net .....One 4 cavity mold with all pins.
- HangFireW8.....hangfirew8 (at) gmail and add a dot com.....
One 4 cavity mold with all pins- GLL.....gllewis at pasadena dot edu.....
One 4 cavity mold with large pins & penta pins- almostgem.....almostgem at comcast dot net.....
One 4 cavity mold with large pins & penta pins- denul.....dennis dot a dot ulrich at gmail dot com.....One 4 cavity mold with all pins
- DanM.....d a n m o n e a t n e t z e r o d o t c o m.....One 2 cavity mold with large and blank pins
- Hard Cast.....patrickreed1987 (at) hotmail (dot) com.....One 2 cavity mold with all pins.
- Potsy.....brianwestww at hotmail dot com.....
One 2 cavity mold with all pins- jesslm02.....jesslm02 AT gmail DOT com.....One 4 cavity mold with penta pins
- Leadmelter..... gpiech at cavtel dot net.....
One 2 cavity mold with all pins- dragon813gt.....dragon813gt at yahoo dot com......One 4 cavity mold with all pins
- TMSCU......Tmoyer1952 at yahoo dot com.....
One 4 cavity mold with all pins and One set of handles- hamour.....hank (underscore) austin (at) msn (dot) com...
One 4 cavity mold with all pins- AnthonyB.....anthonybennett at comcast.net.....
One 4 cavity mold with all pins- Qeyes.....xt at koping dot net .....
One 4 cavity mold with all pins- MostlyOnThePaper.....kc5vtk at comcast dot net.....
One 4 cavity mold with all pins- ElectricEric.....esbecker69 AT gmail Dot com .....
One 4 cavity mold with all pins and One set of handles- captain03.....captain-03ATcomcastDOTnet.....
One 2 cavity mold with all pins- TurksandKaos.....gdubytz(at)live(dot)com.....
One 4 cavity mold with all pins- 258bob.....mbmjz/@aol.com.....
One 2 cavity mold with all pins- alrighty..... restorerancientiron(@)gmail(.)com.....
One 4 cavity mold with all pins- Sb1.....9sbowen9 AT gmail dot com.....One 4 cavity mold with all pins.
- FLYCUTTER.....r underscore KARK at ATT dotNET.....
One 4 cavity mold with all pins- square butte.....vwright AT vtc d0t edu......One 2 cavity mold with all pins
- Rdbronco.....richatbroncoedotcom.....
One 4 cavity mold with all pins- Shaky.....Haglerpjatyahoodotcom.....
One 2 cavity mold with all pins- doctorggg.....gggmmg at verizon dot net .....
One 4 cavity mold with all pins- Lonely Raven.....Lonely Raven AT Hotmail Dot Com..... One 4 cavity mold with all pins
- emorris.....eam3clm at att dot net..... One 2 cavity mold with penta pins.
- Cord.....denbay29 at sbcglobal dot net.....One 2 cavity mold with large and penta pins.
- dcpd453..... dcpd453 at yahoo dot com.....One 4 cavity mold with large pins
- SP5315.....wmclark AT email DOT com.....One 4 cavity mold with all pins
- Just plain Bill.....twoguncorkin at verizon dot net.....One 2 cavity mold with all pins
- lonewelder.....lonewelder at msn.com.....One 4 cavity mold with large and penta pins
- DonOhio39.....Buck_eye9 at hotmail dot com.....One 4 cavity mold with large and blank pins
- jehicks87.....jehicks87(at)gmail(dot)com.....One 4 cavity mold with blank pins
- freebullet.....Apexservicesomaha at gmail dot com.....One 4 cavity mold with all pins and a set of handles
- Jupiter7.....John(dot)Tucker78 @ yahoo (dot) com.....One 2 cavity mold with penta and blank pins
- spuddicus.....josh dot panos at hotmail dot com.....One 4 cavity mold with all pins
- Hamish.....popeye91 at frontier dot com..........One 2 cavity mold with penta pins
- silverjay.....Silverjay7(at) gmail (dot) com.....One 4 cavity mold with all pins
- Carlsoncaster.....scottredmondor (at) gmail (dot) com.....One 4 cavity mold with all pins and a set of handles
- SethD.....sethdoty 4 44 at hot mail dot com.....One 4 cavity mold with all pins
- PB234.....jeff5tg at yahoo dot com.....One 4 cavity mold with all pins
- g.pennell.....browning3855 at hotmail.com.....One 4 cavity mold with penta HP pins
- Vtnam68.....timratolypendotcom.....One 2 cavity mold with all pins
- harley45.....Eric at whitetigerblog dot com.....One 4 cavity mold with all pins
- wymanwinn.....wyman dot winn at verizon dot net.....One 4 cavity mold with all pins and One set of handles
- Relsom.....browningr AT email DOT com.....One 4 cavity mold with large and penta HP pins
|
   
   
|
|
Originally Posted by gester01
