RotoMetals2Load DataSnyders JerkyLee Precision
Inline FabricationWidenersTitan ReloadingReloading Everything
Repackbox MidSouth Shooters Supply
Page 1 of 13 1234567891011 ... LastLast
Results 1 to 20 of 257

Thread: MiHec 30 Sil brass four cavity solid

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    MiHec 30 Sil brass four cavity solid

    This GB is closed...

    MiHec 30 Sil brass four cavity solid
    This is a sign-up thread for an old GB & BRP mold design........ specifically a heavier cast boolit for the 30 caliber rifles. It also fits and shoots well in the semi-autos. This boolit is a gas check design. It casts out slightly above 0.312" and sizes easily to 0.309". Ready to load weight is about 180 gr. dependent on your alloy. It has fit in everything we've tried it in. To date the best load has gotten sub 1 MOA at 378 yds out of a semi-auto 7.62 AR in the lower 2100 fps to 2400 fps range. Price is $95 + $15 shipping...price to be verified with MiHec

    Please give your disguised e-mail address (you won't be on the list for an invoice unless you do so) and the number of molds you want.

    The discussion thread is here: http://castboolits.gunloads.com/showthread.php?t=137438

    A hollow point version is here:
    http://castboolits.gunloads.com/showthread.php?t=154615
    This will be cut at the time the four cavity solid is.























    Interest list from the discussion thread and sign up list:If there isn't anything after your handle, then you haven't ordered yet.
    1. Doc Highwall.....highwall--at--cox--dot--net.....
      One 4 cavity mold
    2. Dutch4122......dutch4122(at)yahoo(dot)com....
      One 4 cavity mold
    3. oso.....buffyh98 at yahoo dot com.....One 4 cavity mold
    4. Two 4 cavity molds from private individuals..... Contact 45 2.1 for e-mail addresses
    5. ddeaton.....ddeaton at zoomtown dot com.....One 4 cavity mold
    6. dromia.....adam(at)pukkabundhooks(dot) com.....
      One 4 cavity mold
    7. Southern Son.....ronandruby At bigpond DoT com .....One 4 cavity mold
    8. dragonrider.....dragonrider at charter dot net..... One 4 cavity mold
    9. bwgdog.....barryw goodwin at gmail dotcom.....
      One 4 cavity mold
    10. Bodydoc447.....BodyDoc447 (at) AOL (dot) COM.....
      One 4 cavity mold
    11. IIJSavoy.....iijsep at gmail dot com.....
      One 4 cavity mold
    12. KennethF.....snugglebeargus at aol dot com.....One 4 cavity mold
    13. SAJTU.....catlynu-at-earthlink-dot-net.....One 4 cavity mold
    14. TreeKiller.....gd16327 (at) yahoo dot com..... One 4 cavity mold
    15. big bore nut.....greggoryashley (at) yahoo (dot) com..... One 4 cavity mold
    16. mpbarry1.....mpbarry1 at gmail dot com..... One 4 cavity mold
    17. NYBushBro.....mopedmedic AT hotmail DOT com.....
      One 4 cavity mold
    18. alamogunr.....alamogunr AT charter DOT net.....
      One 4 cavity mold
    19. James Wisner.....jwisner AT compprime DOT com..... One four cavity mold
    20. midnight.....rwhyte at wi dot rr dot com.....One 4 cavity mold
    21. shotgun sherry.....sherrylynn at gotsky dot com.....One 4 cavity mold
    22. peterthevet.....peterherpvet at gmail dot com.....
      One 4 cavity mold
    23. rays308.....dbltap308 AT hot mail DOT com.....
      One 4 cavity mold
    24. OuchHot.....rdhcai AT aol DOT com..... One 4 cavity mold
    25. Humbo.....bardisattva at gmail dot com.....
      One 4 cavity mold
    26. Matt G.....matt (at) goodrichfamilyassoc (dot) org.....
      One 4 cavity mold
    27. luigi's mongey.....caroldavid9(at)bigpond(dot)com(dot)au ..... One 4 cavity mold
    28. patsher.....patsher(at)tribcsp(dot)com.... One 4 cavity mold
    29. hotwheelz.....willsfxsts at g mail dot com..... One 4 cavity mold
    30. AKtinman.....aardvark at nutelecom dot net..... One 4 cavity mold
    31. HighHook.....pvolkman3 at gmail com..... One 4 cavity mold
    32. Alan.....aatwood2 at tx dot rr dot com..... One 4 cavity mold
    33. Salmon-boy.....salmon-boy using comcast for net..... One 4 cavity mold
    34. Springfield.....whytelw AT comcast DOT net..... One 4 cavity mold
    35. M-Tecs.....jjkar15 AT comcast DOT net.....One 4 cavity mold
    36. Johnny Cyclone.....robert spot simon att cox spot net.....One 4 cavity mold
    37. Jailer.....turbojailer (at) gmail (dot) com..... One 4 cavity mold
    38. Dirtdgger.....dirtdgger3355atyahoodotcom..... One 4 cavity mold
    39. geargnasher.....geargnasher (at) gmail (dot) com..... One 4 cavity mold
    40. ilium.....ilium at woh dot rr dot com.....One 4 cavity mold
    41. Echo.....edsanford at cox dot net.....One 4 cavity mold
    42. Valley Forge.....lfh at hollywoodsound dot com.....One 4 cavity mold
    43. fatelvis.....Kimndave99 (at) comcast (dot) net..... One 4 cavity mold
    44. rockrat.....pAPA aLPHA vICTOR pAPA at montrose dot net.....
      One 4 cavity mold
    45. BrassMagnet......ronaldmeyersAToptimumDOTnet..... One 4 cavity mold
    46. johnvid.....jvidmar at windstream dot net.....One 4 cavity mold
    47. chboats.....boatmanc at yahoo dot com.....One 4 cavity mold
    48. ShootNSteel.....jmm114 AT uakron DOT edu..... Opted out for three cavity HP version
    49. Digger.....awhitesides at frontier dot com.....Opting out for three cavity HP version
    50. PhatForrest.....Forrest.e.Andrews at gmail.com..... One 4 cavity mold
    51. greyarea.....ferrallb at gmail dot com.....One 4 cavity mold
    52. crabo.....crabo308 at gmail dot com.....One 4 cavity mold
    53. castalott.....Hillyer56(aaatttttt)Jahooo.com (spelling)..... One 4 cavity mold
    54. mannyCA.....mohave76 at att dot com.....One 4 cavity mold
    55. RED333.....jefhover at tds dot net.....One 4 cavity mold
    56. KYCaster.....JerryDVC at windstream dot net.....One 4 cavity mold
    57. DanM.....d a n m o n e a t n e t z e r o d o t c o m.....
      One 4 cavity mold
    58. swiss 96/11.....bigrockfish7 at aol dot com.....One 4 cavity mold
    59. Artful.....FLAIR (underscore) BIRD AT YAHOO dot com.....
      One 4 cavity mold
    60. dragon813gt.....dragon813gt at yahoo dot com..... One 4 cavity mold
    61. 1lostinthetrees.....Kevin dot ord at frontier dot com.....One 4 cavity mold
    62. GlocksareGood.....B(underscore)maney at verizon dot net
      ..... One 4 cavity mold
    63. Plinkster.....Josiahzeek at gmail dot com.....One 4 cavity mold
    64. ph4570.....videodog at comcast dot net.....One 4 cavity mold Added after Closing GB
    65. tomme boy...... mtheath at mchsi dot com.....One 4 cavity mold Added after Closing GB

    Here is something to look at:
    Attached Thumbnails Attached Thumbnails 30 Cal Sil 180gr..JPG   312_173SILH.JPG  
    Last edited by 45 2.1; 12-11-2012 at 08:42 PM.

  2. #2
    HONCHO EMERITUS


    Dutch4122's Avatar
    Join Date
    Mar 2005
    Location
    ??????
    Posts
    1,754
    You know I'm in on this design dutch4122(at)yahoo(dot)com


    I failed to order one of these from BRP and I'll not let that mistake happen again!

    You guys with .308's should really think hard about this design. It would be money well spent!
    Last edited by Dutch4122; 04-19-2012 at 01:18 PM.
    -Matt
    Group Buys Honcho'd: C326-175-FN, 434-210-RF, C434-210-RF, 30-165-SIL-MOD, 358156-PB, 413-170-Keith, C348-225-FN, 8mm SIL, 45-230-CM, 45-270-Ohaus/SWC, Edd's 28-170-FN

  3. #3
    Boolit Man
    Join Date
    Apr 2010
    Location
    Near Selma Al
    Posts
    81
    I gotta have one of these.

    It looks like an improved 311332 and they shoot very well out of my autos.

    dbltap308n AT hot mail DOT com

    Thanks
    RayS
    Last edited by rays308; 07-18-2012 at 10:16 AM. Reason: Corrected Email
    Rays

  4. #4
    Boolit Master
    Join Date
    May 2011
    Posts
    761
    I will take one, thank you!
    rdhcai AT aol DOT com

  5. #5
    Boolit Man
    Join Date
    Nov 2008
    Location
    Melbourne,Australia
    Posts
    94
    Address is peterherpvet at gmail dot com

    One 4 cavity mold please........many thanks for this buy.Regards Peter.

  6. #6
    Boolit Master
    Join Date
    Mar 2005
    Posts
    952
    one mould, please.

    BodyDoc447 (at) AOL (dot) COM

    Thanks,
    Doc

  7. #7
    Boolit Man
    Join Date
    Dec 2011
    Location
    NoVA
    Posts
    87
    On the list....

    One mold for me....iijsep at gmail dot com

    Thanks,
    Ira

  8. #8
    Boolit Master
    Doc Highwall's Avatar
    Join Date
    May 2007
    Location
    Ct
    Posts
    4,615

    Talking

    Doc Highwall one mould.

    highwall--at--cox--dot--net

  9. #9
    Boolit Buddy
    Join Date
    Dec 2008
    Location
    In the reloading room
    Posts
    381
    Please sign me up for one mold.
    bardisattva at gmail dot com
    Thanks!

  10. #10
    Boolit Buddy
    Join Date
    Feb 2011
    Location
    CA
    Posts
    243
    One mold please barryw goodwin at gmail dotcom

  11. #11
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    4,509
    Add my email address:

    alamogunr AT charter DOT net
    John
    W.TN

  12. #12
    Boolit Bub werepyr's Avatar
    Join Date
    Dec 2010
    Location
    Beebe, AR 72012
    Posts
    53
    One mold werepyr at yahoo dot com

  13. #13
    Boolit Master


    Matt_G's Avatar
    Join Date
    Dec 2008
    Location
    Colorado
    Posts
    1,185
    This design looks like a winner.
    I would like one mould please.
    matt (at) goodrichfamilyassoc (dot) org
    Matt

    44 Special Articles

    With regards to gun control in this country, everyone should be asking themselves one question:
    What is it that this government feels they need to do, but can't do, unless the citizens of this nation are first disarmed?
    (I seriously doubt you can come up with any plausible answers that you will like...)

    ΜΟΛΩΝ ΛΑΒΕ

  14. #14
    Boolit Master


    Matt_G's Avatar
    Join Date
    Dec 2008
    Location
    Colorado
    Posts
    1,185
    BTW, I would be in for a 7mm also, if you decide to do them Bob.
    Matt

    44 Special Articles

    With regards to gun control in this country, everyone should be asking themselves one question:
    What is it that this government feels they need to do, but can't do, unless the citizens of this nation are first disarmed?
    (I seriously doubt you can come up with any plausible answers that you will like...)

    ΜΟΛΩΝ ΛΑΒΕ

  15. #15
    Boolit Master
    Join Date
    Jul 2009
    Posts
    678
    Confirming my interest in one 4 cav. GC solid.

    mopedmedic AT hotmail DOT com

  16. #16
    Moderator Emeritus
    dromia's Avatar
    Join Date
    Mar 2005
    Location
    UK. Sutherland & Co Durham
    Posts
    5,134
    One mould for adam(at)pukkabundhooks(dot) com.


    For fine firearms and shooting requisites visit my Web Site by clicking the link below:

    Pukka Bundhooks

  17. #17
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by Matt_G View Post
    BTW, I would be in for a 7mm also, if you decide to do them Bob.
    The 7mm Sil for military throats will occur after the 8mm Sil gets far enough along. That 8mm Sil is the best 8mm boolit i've shot so far and its barely crawling along on the interest thread.

  18. #18
    Boolit Master

    alamogunr's Avatar
    Join Date
    Mar 2005
    Location
    Tennessee
    Posts
    4,509
    Quote Originally Posted by 45 2.1 View Post
    The 7mm Sil for military throats will occur after the 8mm Sil gets far enough along. That 8mm Sil is the best 8mm boolit i've shot so far and its barely crawling along on the interest thread.
    Thread?
    John
    W.TN

  19. #19
    Boolit Master


    Matt_G's Avatar
    Join Date
    Dec 2008
    Location
    Colorado
    Posts
    1,185
    Quote Originally Posted by alamogunr View Post
    Thread?
    Looks like this one here John. If I had an 8mm, I'd be in...
    8mm Sil
    Matt

    44 Special Articles

    With regards to gun control in this country, everyone should be asking themselves one question:
    What is it that this government feels they need to do, but can't do, unless the citizens of this nation are first disarmed?
    (I seriously doubt you can come up with any plausible answers that you will like...)

    ΜΟΛΩΝ ΛΑΒΕ

  20. #20
    Boolit Mold luigi's mongey's Avatar
    Join Date
    Oct 2010
    Location
    Hobart, Tasmania
    Posts
    26
    One mold for luigi's mongey

    caroldavid9(at)bigpond(dot)com(dot)au

    cheers

    DAVE

Page 1 of 13 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check