another 20ga slug question

**hatcreek** · 04-08-2012, 10:05 PM

These shots were fired at 50yds bench rest, 20ga 870 rifled barrel, the rounds were a 44 cal bullet in a SPW in a Hornaday hull on top of 19 gr of WSF.
I do have a question, is there a mold out there that I can cast and load like a Lee keyway, it seems to me that i read somewhere that a .58cal, might work, this is for 20ga. Thanks

Click image for larger version.

Name: 20ga target april 8th 12.jpg
Views: 19
Size: 95.0 KB
ID: 43152

**SuperBlazingSabots** · 04-09-2012, 08:29 AM

**hatcreek** · 04-09-2012, 11:25 AM

Thanks Ajay, I will be interested in the slug you are working on sounds great, thanks again. Pat

**DODGEM250** · 04-10-2012, 07:04 AM

Here's my 20 gauge slug setup with a .58 Minie in a sabot. Less the felt filler wad. It is not necessary anymore. I use 26grains of HS-6 in my 20 gauge shells. The poly wad is a BPI Commander. I pack these in high-brass 20 gauge hulls. This is my reloading answer to the Remington BuckHammers I was using.

BP	Bronze Point	IMR	Improved Military Rifle	PTD	Pointed
BR	Bench Rest	M	Magnum	RN	Round Nose
BT	Boat Tail	PL	Power-Lokt	SP	Soft Point
C	Compressed Charge	PR	Primer	SPCL	Soft Point "Core-Lokt"
HP	Hollow Point	PSPCL	Pointed Soft Point "Core Lokt"	C.O.L.	Cartridge Overall Length
PSP	Pointed Soft Point	Spz	Spitzer Point	SBT	Spitzer Boat Tail
LRN	Lead Round Nose	LWC	Lead Wad Cutter	LSWC	Lead Semi Wad Cutter
GC	Gas Check

Thread: another 20ga slug question

Thread Tools

another 20ga slug question

Posting Permissions