MiHec 308 Hunting Boolit 2 or 4 Cavity Brass Cramer

[45 2.1]

MiHec 308 Hunting Boolit 2 or 4 Cavity Brass Cramer

This is a run of a new boolit design. This will be a two or four cavity, single crimp groove, cramer brass GCHP mold that is suitable for the 30 caliber rifles. It will cast at 0.312". The weight was about 154 gr as a hollow point and 159 gr. as a solid. The nose design is similar to the 311440 and 30 silhouette molds of my design.

This GB is closed.....

The following is the discussion thread.
http://castboolits.gunloads.com/showthread.php?t=143017

We will need fifteen to commit to this. We will run this until we get the number we need or more.

Pin options include: 1) large round HP, 2) blank pin for solid

For the two cavity mold, the price is $90 with one set of HP pins included plus $8 for the extra blank (flat nose) pin set if wanted plus $15 shipping.

For the four cavity mold, the price is $120 with one set of HP pins included plus $16 for the extra blank (flat nose) pin set if wanted plus $20 shipping.

Edit: If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.


Please list your Forum name and your e-mail address in suitable form. the number of 2 or 4 cavity molds you want and if you want the blank pin option.

[45 2.1]

Here is the interest list from the discussion thread as well as the sign-up list:

1. coxd.....coxd303b at gmail dot com..... One - 2 cavity mold with blank pins
2. bowfin.....mjones23ATnebDOTrrDOTcom.....One - 2 cavity mold with HP pins
3. shangrila.....unluckyone at mailcity dot com.....One - 2 cavity mold with extra blank pins
4. gmsharps.....gmsharps@csdotcom.....One - 4 cavity mold with all pins
5. Gun-adian.....jumpgate at telus dot net..... One - 4 cavity mold with extra blank pins
6. Jeff_WNY.....castboolits AAATTT lockport DDDOOOTTT net .....
   One - 2 cavity mold with all pins
7. Rattlesnake Charlie.....charles uunderscoore nuss aat
   yaahooo doot comm.....One - 4 cavity mold with extra blank pins
8. Ramslammer.....namovlov at bigpond dot com.....
   One - 2 cavity mold
9. Mike Hughes.....mike.hughes1atyahoodotcom..... One - 4 cavity mold with extra blank pins
10. pipehand.....mccarthykfAThotmailDOTcom..... One - 4 cavity with extra blank pins
11. MDF99.....FRAROCKET (at) aol (dot) com.....One - 2 cavity mold
12. Cord.....denbay29 at sbcglobal dot net..... One - 2 cavity mold
13. glowe.....greg-lowe at hotmail dot com.....One - 2 cavity mold with all pins
14. x101airborne.....x101airborne at yahoo dot com.....One - 2 cavity mold with HP pins
15. Shakey Jakey.....putzieataoldotkom.....One - 2 cavity mold with all pins
16. rollmyown....roberto1reynardo at gmail dot com....One - 2 cavity mold with extra blank pins
17. Shooternz.....robertwalker1at vodafonedotcodotnz.....One - 4 cavity mold with extra blank pins
18. hornady308.....stuartd173 at gmail dot com..... One - 2 cavity mold with all pins
19. SNEAKY_NL.....ddflatliner atttt gmail dotttt com.....One - 4 cavity mold with extra blank pins.
20. dverna.....dverna001 at aol dot com .....One - 4 cavity mold with all pins
21. scrubber.....dlporter at speakeasy dot net.....One - 4 cavity mold with extra blank pins
22. Bert2368.....bert (at) hollywoodpyrotechnics (dot) com.....One - 4 cavity mold with all pins
23. dromia.....adamatpukkabundhooksdotcom.....One - 4 cavity mold with extra blank pins
24. uaskme.....pardue10 at comcast dot net.....One - 4 cavity mold with HP pins
25. Bodydoc447.... BodyDoc447 at AOL dot com.... One - 2 cavity mold with the blank pin option
26. winelover.....majorcin at yahoodotcom..... One - 2 cavity mold with the blank pin option
27. Spartacus.....wahnehega at usa dot com.....One - 4 cavity mold with extra blank pins
28. BoolitBill.....tanstaafldds at aol dot com.....One - 2 cavity mold with the blank pin option
29. gmsharps.....gmsharps at cs dot com .....One - 2 cavity mold with extra blank pins
30. IIJSavoy.....iijsep at gmail dot com.....One - 4 cavity mold with extra blank pins
31. peterthevet.....peterherpvet at gmail dot com.....One - 2 cavity mold with extra blank pins
32. starbits.....katy2kary at tx dot rr dot com.....One - 4 cavity mold with blank pins
33. chuck4570......chuckdoa2002 at yahoo dot com......One - 4 cavity mold with extra blank pins
34. hunter64.....jcarter64 at shaw dot ca..... One - 2 cavity mold with all pins
35. dragon813gt......dragon813gt @ yahoo.com...... One - 4 cavity mold with all pins
36. square butte.....vwright at vtc dot edu.....One - 2 cavity mold with all pins
37. CSH.....shawnhoward31 at gmail dot com..... One - 4 cavity mold with all pins
38. 8mm.....mhaley7030at aol dot com..... One - 2 cavity mold with HP pin
39. chrisw.....Cwillis at mail dot com.....One - 2 cavity mold with all pins. Drill for probe if possible
40. Mark85304........marksaunders at cox dot net.....One - 4 cavity mold with all pins
41. Aaron.....5090 shiloh at gmaildotcom.....One - 4 cavity mold with all pins
42. another gunslinger.....creekmontgbc at gmail dot com.....One - 2 cavity mold with the extra set of pins if the HP is not reversible for flat nose.
43. FLYCUTTER..... R underscore Kark at ATTdot NET.....One - 4 cavity mold with all pins
44. cja245.....cja245 at gmail dot com.....One - 4 cavity mold with HP pins
45. SP5315.....wmclark AT email DOT com.....One - 2 cavity mold with all pins
46. meadmkr..... meadmkr at yahoo dot com.....One - 2 cavity mold with all pins
47. AlphaFoxtrot.....Bowen dot Smith at gmail dot com..... One - 4 cavity mold with HP pins
48. BK7saum.....bradleyk4860 AT gmail DOT com.....One 2 cavity HP with flat pins
49. Olevern.....midimizeat dishmaildotnet.....One 2 cavity HP with flat pins
50. hoplite.....hoplite dot junk at comcast dot net.....One - 4 cavity mold with all pins
51. Shedhunter.....canerod1300 (at) hotmail (dot) com..... One 2 cavity HP
52. Der SchizKoph.....moyenjr AT yahoo.com.....One - 4 cavity mold with HP pins
53. pack3480.....dcasad at hotmail dot com..... One - 4 cavity mold with all pins
54. kendwell.....kendwell at surfglobal dot net.....One - 4 cavity mold with all pins
55. hicard.....hicardattheskybeamdotcom.....One 2 cavity HP
56. crawfobj.....Bryan_crawford98 at yahoo dot com.....One - 4 cavity mold with all pins
57. Loony44.....dasuloomATyahooDOTcom.....One - 4 cavity mold with all pins
58. lonewelder.....lonewelder at msn.com.....One - 2 cavity mold with blank pins
59. Nabind.....Drsdott1964atyahoodottcom.....One - 4 cavity mold with all pins
60. uncleskippy.....danielap at forsyth dot cc.....One - 2 cavity mold with all pins
61. freebullet.....apexservicesomaha at gmail dot com.....One - 4 cavity mold with all pins and a set of handles
62. readr1.....Readr1 at yahoo dot com .....One - 4 cavity mold
63. castblast.....sthwld64atgmaildotcom.....One - 2 cavity mold with all pins
64. oldtoolsniper.....oldtoolsniper(at)aol(dot)com.... .One - 2 cavity mold with all pins
65. rhadamanthos12.....kamisama12 at gmail dot com.....One - 4 cavity mold with all pins
66. SethD.....sethdoty 4 44 at ho t mai l dot com.....One - 2 cavity mold with all pins
67. 2thepoint.....paugello (at) com cast (dot) net.....One - 2 cavity mold with all pins and a set of handles
68. troy71mo.....thompson dot troyj at gmail dot com.....One - 2 cavity mold with all pins and a set of handles
69. Crash Corrigan.....crashcorrigan at cox dot com.....One - 2 cavity mold with all pins
70. DanWalker.....crowshooter223 at hotmail dot com.....One - 2 cavity mold with all pins
71. greywuuf.....greywuufATgciDOTnet.....One - 2 cavity mold with all pins
72. silverjay.....Silverjay7ATgmailDOTcom.....One - 2 cavity mold
73. GARD72977.....gard72977ATyahooDOTcom.....One - 2 cavity mold with all pins
74. harley45.....Eric at whitetigerblog dot com.....One - 4 cavity mold with all pins
75. Iron Mike Golf.....sugdenjw at msn dot com.....One - 4 cavity mold with all pins
76. fivegunner.....fivegunner -at sbcglobal -dot- net.....One - 4 cavity mold with all pins
77. BaconStrips.....BaconStrips at hushmail dot com.....One - 4 cavity mold with all pins
78. curdog..... jlacazeATsbcglobalDOTnet.....One - 2 cavity mold
79. funshooter.....weldinspector(at) earthlink(dot)net.....One - 4 cavity mold with large HP and 4 sets of blank pins and one set of handles
80. BSalty.....BSalty slvrlinin at live dot com.....One - 4 cavity mold with all pins
81. Janoosh.....Janoosh 357 at Gee mail dot com.....One - 2 cavity mold
82. alha.....snowserver (at) hotmail d0t com.....One - 4 cavity mold with all pins
83. sparkz.....Sparkz1000 AT Gmail DOT Com.....One - 2 cavity mold with all pins
84. Smoke4320.....Smoke at Paintball Kingdom dot com.....One - 4 cavity mold with all pins
85. Whistler.....jonas.bjork84 at gmail dot com.....One - 4 cavity mold
86. Worn Holster.....Worn_Holster / mondovino at gmail dot com.....One - 2 cavity mold with all pins
87. grunt4.....brian whetsel AT msn .com.....One - 4 cavity mold with all pins and one set of handles
88. Jupiter7.....John(dot)tucker78@yahoo(dot)com.....O ne - 2 cavity mold
89. mick27.....mjsharps at yahoo dot com.....One - 2 cavity mold with all pins
90. Hayesnjess.....Hayesnjess at aol dot com.....One - 2 cavity mold with all pins
91. bushog.....boo-haaa (at) hot mail (dot) com.....One - 4 cavity mold with all pins

[Bodydoc447]

Please add me for a 2 cavity mould with the blank pin option.

BodyDoc447 at AOL dot com

Thanks,

Doc

[Ramslammer]

G'Day
2 Cav for me
namovlov at bigpond dot com

[rollmyown]

2 cavity for me thanks.

roberto1reynardo at gmail dot com

[dromia]

Four cavity + one set of blank pins.

adamatpukkabundhooksdotcom

[scrubber]

Put me down for a 4 cavity, with HP and solid pins

dlporter at speakeasy dot net

[winelover]

I'm in for a 2 cavity HP with both sets of pins.

majorcin at yahoodotcom

Winelover

[shangrila]

2 cav + extra (flat) pins. unluckyone at mailcity dot com

[Spartacus]

One 4 cavity with all pins for me please.

wahnehega at usa dot com

[BoolitBill]

I am in for a two cavity with all pins.

tanstaafldds at aol dot com

[Rattlesnake Charlie]

Confirm.

4-cavity mold w/ HP pins - $120
Extra blank (flat nose) pin set - $16
Shipping - $20
Total - $156

charles uunderscoore nuss aat yaahooo doot coomm

[no34570]

I am in for a two cavity with all pins.

no34570atgmaildotcom
Thanks

[45 2.1]

For anyone who ordered the blank pin option, please review the edit in blue up in the first post to see if you want to change your choice.

[Beau Cassidy]

I assume this one will chamber in Marlins?

Why don't you bump the diameter to .352 or .353 and offer it for us .348 Win fellas.

[45 2.1]

I assume this one will chamber in Marlins?

Why don't you bump the diameter to .352 or .353 and offer it for us .348 Win fellas.

I think use in a Marlin would be a very tight fit.

The 348 Win might work if this were expanded, providing there were enough interested.

[gmsharps]

2 cavity with extra pins
gmsharps at cs dot com

[Shooternz]

Confirm, one 4 cavity mould with both sets of pins,
robertwalker1at vodafonedotcodotnz
Thanks
Robert

[hicard]

45 2.1. Before I can confirm my order for this mould I still would like to know the dia. just ahead of the crimp groove and the dia. just at the start of the ogive. You stated it is a gentle taper but from ? to ? diameters please.

[45 2.1]

Before I can confirm my order for this mould I still would like to know the dia. just ahead of the crimp groove 0.308" and the dia. just at the start of the ogive.0.304" You stated it is a gentle taper but from ? to ? diameters please.