MiHec 308 Hunting Boolit 2 or 4 Cavity Brass Cramer
This is a run of a new boolit design. This will be a two or four cavity, single crimp groove, cramer brass GCHP mold that is suitable for the 30 caliber rifles. It will cast at 0.312". The weight was about 154 gr as a hollow point and 159 gr. as a solid. The nose design is similar to the 311440 and 30 silhouette molds of my design.
This GB is closed.....
The following is the discussion thread.
http://castboolits.gunloads.com/showthread.php?t=143017
We will need fifteen to commit to this. We will run this until we get the number we need or more.
Pin options include: 1) large round HP, 2) blank pin for solid
For the two cavity mold, the price is $90 with one set of HP pins included plus $8 for the extra blank (flat nose) pin set if wanted plus $15 shipping.
For the four cavity mold, the price is $120 with one set of HP pins included plus $16 for the extra blank (flat nose) pin set if wanted plus $20 shipping.
Edit: If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversable pins, you can order a set of blank pins for a smooth mold bottom.
Please list your Forum name and your e-mail address in suitable form. the number of 2 or 4 cavity molds you want and if you want the blank pin option.