MiHec 2 cavity Brass Hollow Base 45-70 mold

[69papatango]

I would like a .462" mold and a set of blank pins.
Please and Thank you!
any info on handles that will work with this mold or would I need to purchase separately from MiHec website?

papatango1969(@)gmail(dot)com

[45 2.1]

Any info on handles that will work with this mold or would I need to purchase separately from MiHec website?

Lee commercial six cavity mold handles work as well as MiHecs handles.

[ohnomrbillk]

Please count me in for one mould

.462 with the extra FB flush pins

william (dot) kinderknecht (at) gmail (dot) com

thanks

[45 2.1]

Please count me in for one mould

.462 with the extra FB flush pins

william (dot) kinderknecht (at) gmail (dot) com

thanks

OK.... a little more info would be good. Do you want the HB and blank pins or just the blank flat base pins?????

[rollmyown]

I just want to be clear I want both HB and blank pins.

Cheers

[ohnomrbillk]

OK.... a little more info would be good. Do you want the HB and blank pins or just the blank flat base pins?????

I would like both the hollow base pins and also the blank pins.

[Duett]

I would like to have one HB 0.462" mold with extra blank pins, thanks!

anckni (at) gmail dot com

[schraubermani]

I am in for one die + handles + flat base plug+ hollow base plug + blank pins

Dia .462

schraubermani at yahoo dot de

[codeNshoot]

Going to have to drop out of this GB in favor of the hammer.

Not that they're even in the same class, but my single cav HB is running well enough thatI don't feel the need for another.

Sorry for the inconvenience.

[hicard]

I will sign up for a .460 w/no extra pins. hicardattheskybeamdotcom

[lobosdoc]

I would like a .460 with a set of blank pins, as well as a pair of Mihec handles. lobosemdocatgmaildotcom.
Don't want to seem hasty - it's worked out to my benefit as I can jump onboard, but it seems like this group buy has been growing for quite some time - any indications on when it might go into production? Thanks!

[Bryan Marino]

I would like one mold, .460, with extra flush pins please.

nikonguy4570 at sympatico dot ca

[nanuk]

december bump

[hunter64]

Forgot I signed up for this GB. I am no# 10 on the list (10.hunter64.....need e-mail address.....
one 0.460" mold with blank pins) and you need my email address. jcarter64 at shaw dot ca

[45 2.1]

Everything updated........... check the list to be sure yours is right.

[Duett]

Please remove me from this group buy (order nr 22), thanks!

[lup]

I would like one mold, .460, with all pins please, flush if available.

rstaab (at) panix (dot) com

[colt1960]

I would like to be included to this group buy and would like a .460 mould with both the hollow base pins as well as the flat base pins. thanks Rick. ryoung1960athotmail.com

[ldmcrook]

I am #20 on the list and I want to change mine to 0.460" instead of the 0.462". My Uberti replica Sharps slugged out at 0.457". Thanks.

LDMCROOK (not idmcrook)

[45 2.1]

I am #20 on the list and I want to change mine to 0.460" instead of the 0.462". My Uberti replica Sharps slugged out at 0.457". Thanks.

LDMCROOK (not idmcrook)

Thread updated with all changes................