I'd be very interested.
I'd be very interested.
It is hard to fail, but it is worse never to have tried to succeed.
Theodore Roosevelt
Looks like ten or eleven interested so far. Off to a good start. Are we talking about a 2C mould (my preference) or a four?
Sam
Doc_Stihl
Rattlesnake Charlie 2C
lup
rockrat
btroj 2C
sffar 2C
CATS
johnny356ER
Four Fingers of Death (maybe)
hamour
Ozarklongshot
Ed In North Texas
Ron.D
captaint
ghope
Last edited by sffar; 06-17-2012 at 07:00 PM. Reason: update list
I would prefer a 2 cav. I wouldn't shoot a large enough volume to justify the extra weight of a 4 cav. I just recently got a 375 and it needs a mould.
The BRP design is a good one, I have the mold in a two cavity (one HP'd and the other solid). I use it in my 375 H&H Savage with very good results.
Nice looking boolit! I would probably be interested, but I already have a couple of 375 moulds, but I bough these for the 375 Win and might be a bit wonky to feed in the Rem700 H&H. I will cast up a few and see If I actually need another mould (probably always room for one more).
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
I am in for either weight @ .378 DIA
I'd be interested in a 275g @ .378 HP GC MiHec for my 375 H&H model 70. That gun is a blast to shoot and some good cast would make it more usable and a great pig gun !
Compromise is giving up something you are unwilling to fight for! ΜOΛΩΝ ΛΑΒΕ www.concealedcarryofarkansas.com
I will join in for either weight
Hank
How many do we need to get this on the schedule?
I'd be interested in the 275gr.
~Greg
Hang in there guys. I will post more info later this week or next. My life has turned hectic with moving and now being notified last Friday afternoon at 4:30 pm that today is my last day at work. At least I'll have more time for casting soon!
I'm interested in the 300/275 (or however the HP turns out), maybe one of each (solid and HP) in a 2 cavity.
Ed
I've been keeping track on Post #22. Looks like twelve interested so far.
Sam
I in need of a good deer bullet for my 1989 Kimber , I think I will slug the barrel and see what it shoud have, its never been fired, NIB.
Definetely interested in this as I said before...Definetely looking forward to the HP option.
Ahhh Heck.just call this a shameless bump!
I'm leaning more toward a 300 gr solid, but this will serve perfectly as a weekend bump too.
Ed
Whats a weekend bump?
"I'll help you down the trail and proud to!" Rooster Cogburn.
"Slap some bacon on a biscuit and let's go! We're burnin' daylight! " - Will Anderson (John Wayne) "The Cowboys."
SASS Life Member No 82047
http://s89.photobucket.com/albums/k228/4fingermick/
Psycholigist to Sniper; 'What did you feel when you shot the felon Sargeant?'
Sniper to Psycholigist; 'Recoil Ma'am.'
From my Irish Ancestors: "You've got to do your own growing, no matter how tall your grandfather was."
A bump of any sort is to get this topic up to the beginning of the first page....gets more attention that way.
Is this going to be like Mihec's pistol boolit HP's with reversible pins?
That would be sweet as it would give you the HP/solid option in one mould.
I love that design...would be sweet as all get out in brass!
what about an RG-2/4? 300gr solid, single GG, 275 in HP.
It would be ready for me to take to Africa in 2014 from NOE.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |