Load DataReloading EverythingMidSouth Shooters SupplyLee Precision
Titan ReloadingRepackboxWidenersRotoMetals2
Snyders Jerky Inline Fabrication
Page 1 of 2 12 LastLast
Results 1 to 20 of 39

Thread: c-sharp

  1. #1
    Boolit Master




    wgr's Avatar
    Join Date
    Jul 2008
    Location
    indiana
    Posts
    1,053

    c-sharp

    any c-sharps owners here

  2. #2
    Boolit Grand Master Don McDowell's Avatar
    Join Date
    Jan 2008
    Location
    Hell Gap Wy
    Posts
    6,097
    Yes there are a few
    Long range rules, the rest drool.

  3. #3
    Boolit Master




    wgr's Avatar
    Join Date
    Jul 2008
    Location
    indiana
    Posts
    1,053
    like to hear from you guys ill have one here this month. 45-70

  4. #4
    Boolit Grand Master Don McDowell's Avatar
    Join Date
    Jan 2008
    Location
    Hell Gap Wy
    Posts
    6,097
    .458-.459 diameter bullets grease groove or bore diameter and under patched bullets, 70 grs of goex 2f, or 65 grs of schuetzen 2f. Remington cases.
    I followed the break in procedure with mine, not sure it was all that necessary, but it didn't hurt anything.
    Long range rules, the rest drool.

  5. #5
    Boolit Buddy
    Join Date
    Mar 2012
    Posts
    166
    I've got a Hartford style military buttstock 45 2.4" w/ a 30" heavy octagon. Still have the barrel and blade sights on it right now.

  6. #6
    Boolit Master

    Join Date
    Nov 2007
    Location
    Mtn West
    Posts
    2,188
    Got one, an 1874, 32" hvy bbl in 45 2 7/8. The most accurate BPCR I have. Outshoots the Shiloh 45-70 by a smidge.

  7. #7
    Boolit Master
    Join Date
    Jun 2006
    Location
    Pacific Northwest
    Posts
    2,621
    Well I have an 1874 hunters carbine in 50-70, three 1875 models in 38-56 and 45-70 and two 1885 high walls in 38-55 and 40-65 all by C Sharps. All shoot extremely well and are among my favorite rifles. I got my first one in 1993 and my last one in 2007. Come to think of it its time for another now what cal do I want????

  8. #8
    Boolit Master




    wgr's Avatar
    Join Date
    Jul 2008
    Location
    indiana
    Posts
    1,053
    well i got the hartford model in 45-70 28in barrel. will use is for hunting. shotgun buttstock. ill try both lube and pp boolits see what works. rthinks for sharing bill

  9. #9
    Boolit Master




    Boz330's Avatar
    Join Date
    Jul 2006
    Location
    Central Kentucky
    Posts
    3,961
    2 here an 85 in 40-65 and a 38-55 in the 75 both shoot better than me for sure.

    Bob
    GUNFIRE! The sound of Freedom!

  10. #10
    Boolit Bub
    Join Date
    Feb 2007
    Location
    Minnesota
    Posts
    46
    I have one Model 74. Bought in 2009 chambered in .40-65 Win. In late 2010 I sent it back to be rechambered in .40-70 SS. Have a Baldwin front and a Hoke rear sight. 30" bbl., slight curve to the buttstock. REALLY enjoy shooting it (BP only). Took a bit longer (than the .40-65) to get a good load developed in the .40-70 but once I did it's been a blast. Deficiency? I have to drive 280-miles to get onto a 500-meter range but the times that I do, this rifle gives me lots of enjoyment. And John at the factory (owner?) has always been helpful and pleasant to work with.

    Tom

  11. #11
    Boolit Master
    Join Date
    Dec 2008
    Posts
    1,941
    I've got a few of them. 1874's and 1885's. They shoot well and I really like them. The wood grades are nice but not quite as nice as what you'll find on the Shiloh Sharps rifles.

    I found that John was not bad to deal with at all, but Pete has improved customer service He generally gets back to you pretty quickly on any questions.

    I just got another 1885 the other day. It's a .38 caliber and will be chambered with a .38-55 for the Starline long brass once I get the dimensions sorted out. My next one, if there is a next one, will be a .32-40

    Chris.

  12. #12
    Boolit Master
    Join Date
    Mar 2011
    Posts
    829
    Yep, got 2 of them. A 45-2 7/8 and a 45- 2 6/10. The 45 2 7/8 will chop a hole at 100 yards with a full load of 1F and 560 grain paperpatch. The 2 6/10 hasn't been worked with much but shows great promise.

  13. #13
    Boolit Buddy
    Seth Hawkins's Avatar
    Join Date
    May 2005
    Location
    Jacksonville, NC
    Posts
    131

    C. Sharps 1875 At The Range

    I have a C. Sharps 1875 in .45-70 with a 30" hvy bbl with mid-range tang & front globe.

    My most accurate load to date:

    W-W brass
    CCI BR-2 primers
    Swiss 1.5Fg powder, 70.0 grains, weighed, dropped thu a 24" tube
    0.460" Circlefly overpowder card wad, very lightly compressed by bullet when seated
    Lyman 457677 bullet, seated out as far as my chamber will allow (I made a chamber cast from Cerrosafe to determine chamber dimensions), pan lubed with SPG, sized "as cast", cast from 1:40, weighs in @ 495 gr.

    Depending on the air temp and relative humidity, I can get up to 5 rounds thru the gun before needing to use the blow tube or wipe the bore. I've got a buddy with a Pedersoli who tried this load, and it shoots just as accurately for him as it does for me - around MOA.



    Caveat - I haven't shot this round past 200 yds.
    Last edited by Seth Hawkins; 03-13-2012 at 06:47 AM. Reason: Picture Added
    Political Correctness: A doctrine fostered by a delusional, illogical liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

    Semper Fi -

  14. #14
    Boolit Master kodiak1's Avatar
    Join Date
    Dec 2005
    Location
    Alberta Territory. Canada
    Posts
    860
    3 of them
    74 in 45-70 32" of heavy pipe.
    40-90 BN. 30" of heavy pipe.
    40-70 SS. 30 " of heavy pipe.

    All three shoot great. Wouldn't get rid of either of them as they look, feel and handle really nice.

    Ken.
    Ken.

    Be nice if it was better, but it could be worse

  15. #15
    Boolit Master
    Join Date
    Nov 2006
    Posts
    3,901
    I have an '85 in 45/70 and a 50/90 in a '74, and both are great guns, very accurate and i would recommend them to all. I always believed that their use of Badger barrels gave them the accuracy edge over all others, Badger has changed hands and don't supply BPCR barrels anymore, so I don't know where that leaves C. Sharps for barrels.

  16. #16
    Banned bigted's Avatar
    Join Date
    Mar 2009
    Location
    Sweet Home Oregon
    Posts
    4,456
    those c-sharps must be camera shy huh? if it aint in a photo...it dont count!!!

  17. #17
    Boolit Grand Master Don McDowell's Avatar
    Join Date
    Jan 2008
    Location
    Hell Gap Wy
    Posts
    6,097


    In action at the Quigley.
    Long range rules, the rest drool.

  18. #18
    Boolit Grand Master

    Join Date
    Aug 2011
    Location
    N edge of D/FW Metromess
    Posts
    10,502
    Now we're talking, Don! Any more?
    Endowment Life Member NRA, Life Member TSRA, Member WACA, NRA Whittington Center, BBHC
    Smokeless powder is a passing fad! -Steve Garbe
    I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call, Lonesome Dove
    Some of my favorite recipes start out with a handful of depleted counterbalance devices.

  19. #19
    Boolit Master
    Join Date
    Nov 2006
    Posts
    3,901
    Some of us senior folks have absolutely no idea how to post pictures on the confuser.

  20. #20
    Boolit Master




    wgr's Avatar
    Join Date
    Jul 2008
    Location
    indiana
    Posts
    1,053
    guys sure makes me eager to get mine home.thinks for all the replies bill

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check