Wsf powder

[hatcreek]

Hey all, I just scored 3lbs of WSF powder, I would like to load slugs with this powder, I have LEE 1oz key way, and SPW with a 320 grain .50 cal , 250 grain .50 cal, cast bullets, Fiocchi 2 3/4 hulls 616 primers, has anyone tried this powder? I got the 3 cans for $15.00 could'nt pass it up. Thanks for your help happy casting.

[excess650]

My older Lyman 4th edition lists WSF but Fiocchi hull data is very limited. I see it used in 12ga 1-1/8oz heavy target and field loads and 1-1/4oz field loads in most brands of cases.

Fiocch plastic w/ low plastic base wad (is this what you have?) 2-3/4"

W209 primer 30gr WSF WAA12 wad 1-1/8oz 1305fps 6900psi
W209 primer 32gr WSF WAA12F114 wad 1-1/4oz 1302fps 9700psi
W209 primer 29gr WSF SP12 wad 1-3/8oz 1255fps 10,200psi

There is no buckshot data in Fioccchi hulls and slug data is limited to the 525gr Lyman Sabot slug.

Fiocchi plastic case with HIGH plastic basewad

W209 primer 31gr WSF WAA12F114 wad 525gr Lyman sabot slug 1383fps 10,000psi

thats all I have

[hatcreek]

The hulls are golden pheasant, I got them from BPI for $8.99 primed per 100, their high brass hulls. Thanks for your imput.

[1n5ane]

From lyman's 5th ed:

Fiocchi (7mm plastic basewad) hulls
Lyman 525gr sabot slug
35.0 gr of WSF
WAA12F144
Fio 616
1460fps @ 9900PSI


Fiocchi (7mm plastic basewad) hulls
1-1/8oz bismuth shot
29.0 gr of WSF
WAA12F144
Fio 616
1230fps @ 9700PSI