Simply take an old spoon [cheap soft metal table spoon works for me] and bend the sides up so it will fit into the '73 action and pour into the chamber. Hold the '73 vertical in a padded vise with the cleaning rod/patch already in the bore with the patch just ahead of the chamber. Put the Cerrosafe in the spoon and melt with a propane torch then pour into the chamber. Let it just solidify and cool for maybe 5 minutes then knock out the Cerrosafe/casing with the rod.
Larry Gibson
“Deficient observation is merely a form of ignorance and responsible for the many morbid notions and foolish ideas prevailing.”
― Nikola Tesla
Wow, since 2012! Yes, I did get it out with the bolt with a burr raised on it, no problem and no damage to the chamber. I have shot it a lot since than and no other opportunity to use the bolt again!
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote