Instruction sheet and parts diagram needed. I stripped the thread rod that the lubricant slides over. I used my cordless drill to remove the pressure washer and buggered the rod. Is this easily repaired???afish4570
Instruction sheet and parts diagram needed. I stripped the thread rod that the lubricant slides over. I used my cordless drill to remove the pressure washer and buggered the rod. Is this easily repaired???afish4570
Lyman 450 parts diagram and manual here, page 5- PDF file.
Lyman order form here.
I had to find these just the other day, so I had them bookmarked.
Thanks.... for the Lyman lube/sizer info.....Also I wandered onto a source of info on this site.....cut & paste this to your brouser
http://www.castpics.net/subsite/default.html
Lots of stuff if you know where to look. Afish4570
think you can buy that as a kit
kids that hunt and fish dont mug old ladies
Had to replace the linkage on mine. Old one broke and they no longer have parts.
They have an upgrade kit though.
SHiloh
Je suis Charlie
"A society of sheep must in time beget a government of wolves."
Bertrand de Jouvenel
Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one. Joseph P. Martino
If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand. Milton Friedman
"Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin
lots of good info,but mine has a different handle then the 450 shown? it has Lyman on one side&450 on the other side down on the die housing and under the bullet knock-out link it has LO1-A and a very small "p" below the Lo1-A?????
Calling is what I do when I want a quick back and forth exchange of information
NRA Life
USPSA L1314
SASS Life 48747
RVN/Cambodia War Games, 2nd Place
Yep that's what I'll have to do I'm thinking there's a upgrade out there?
Talk about resurrections! This thread was dead for two year prior to yesterday!
I recently purchased an old 450 in great shape only there is no Pressure Nut, I thought I had read somewhere that some older models did not have one. I am planning on just ordering one anyway.
Anyone have any advice on doing a complete tear down and/or tuning up? Last thing I want to do is fill it with lube to only find out it needs more work.
glad this one came back from the grave, I have to buy the parts to fix 2 of these 450's one found it a dumpster and the other bought here for 25 bucks.
That's a 4500 parts diagram. Will parts #2 and #3 work in my 450? It leaks lube around this part in my 450. Thanks.
USMC E-5 69-72
Paypal is an anti-2nd amendment organization
Good Morning,
Yes, those parts will work in the 450. Attached is a parts diagram for future reference. If you would like to place an order for those parts, please call customer service at 1-800-225-9626 between 9 am – 4 pm EST.
Best Regards,
Customer Service
Lyman Products Corp.
475 Smith St., Middletown, CT 06457
Phone: 800-225-9626
USMC E-5 69-72
Paypal is an anti-2nd amendment organization
I went ahead and ordered every part / rebuild kit I could for my 450.....you never know when the parts will be discontinued / out of stock and no longer available . I saved on shipping !
Certified Cajun
Proud Member of The Basket of Deplorables
" Let's Go Brandon !"
Those parts cost $9.25 shipped.
USMC E-5 69-72
Paypal is an anti-2nd amendment organization
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |