Only been useing Blammers GC,s-Better fit-more consistant-than others. Only use 30 cal. Hope this helps.
Only been useing Blammers GC,s-Better fit-more consistant-than others. Only use 30 cal. Hope this helps.
I'm in for a 2C gas check solid. It will be for a 30 cal so dropping .311-.312 will be fine for me. Awaiting more info.
Here's the deal on diameters:
Two different diameters means two different toolings and setups. Miha will make whichever diameter there is sufficient buyers for.
I'm going to make a quick count here...
21 buyers have requested American diameters
3 buyers have requested Standard diameters
I think we need a larger number of Standard moulds if they are going to be made in that diameter. I haven't ever cast for an Enfield or an SKS. Would a 0.312" boolit still be over groove diameter for you, or is that cutting it too close?
Last edited by HenryC460; 03-25-2012 at 10:40 PM. Reason: Count of American and Standard orders completed
I am #7 on the list so I guess I need to switch to the American diameter, I do not want to miss out on this. I should be able to Beagle it to get the larger size if I need it.
Gmsharps
Must resist, must resist, but.....
For the sake of clarity, is the plan to make solid nose moulds (ie with no pins at all) and separate run with Cramer pins ? Or, are solids made with solid pins in the cramer mould?
Finally, any idea on the size and type of the HP pins ?
I want American Dia. flat pins and a set of round.
4 Cavity is fine
See Some of My Holster Work Here:
www.whitetigerleatherworks.com
#15 on the list:
2 cav.
gas check
American
No HP or solid pins, ie. just a FN
Thanks
Last edited by Nrut; 04-09-2012 at 12:06 AM.
I am # 30 on the list.
Would like to change to American 2C GC with HP.
Thank,
Buckndee
Please add me to the list for:
American 2 cavity, GC, with HP and flat point pins
thanks
PB234
jeff5tg at yahoo dot com
Please change from this:
4. Dannix - 2C (GC) American, all pins
To:
4. Dannix - 2Cav, GC, American, round and solid pins, dpumpkin [@+] runbox (d0+) com
Thanks!
Looks like a great bullet for my '94 30-30. I'm in
4 cav, gas check, american dimensions (.311 would probably be perfect, either way)
standard round pins
Im still interested also. So slap me on whatever list is needed
Please put me down for a 2 cavity, American, GC, all pins
robertzanoni at yahoo dot com
I'm number 31 on the list. I would like to be removed from the list. I have changed my mind and will be going with the 308 hunting bullet that just went active.
Sorry and Thanks,
Scrubber
Just noticed that I got on the list twice - just need one mold - please delete one of them. Please leave #26 and delete #13. Regards, Bill.
Can you please make me (#17) a HP with no extra pins.
Thanks.
At one with the gun.
Please put me down for either a 2 cavity or 4 cavity American dimensions, thanks.
Can you please make mine (#22) an American? This sounds like ordering burgers!
"Unnh, Negative. I am a meat popsicle."
Chuck
Please include me for (1) "American" 4 cav, GC, with all pins.
Valley Forge
4 cavity gas check
American (.312)
round HP pins and flat pins
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |