skeet028,
You are already on the list for a mold. See Page 15 - Post 292. Let me know if this is an additional order.
Simon
skeet028,
You are already on the list for a mold. See Page 15 - Post 292. Let me know if this is an additional order.
Simon
I am still interested in this mold as posted on , Page 14 Post # 271
44 Shooter,
You are down now for a 4C (there wasn't enough interest - 15 2-cavity molds or more to support a 2C buy).
Simon
P.S. List is up-to-date See Page 15 - Post 292
Thread updated - See Post #292, Page 15
Simon
Put me down 4C .434 all pins and handles brianwhetsel at msn dot com
Last edited by grunt4; 05-06-2014 at 04:15 PM. Reason: forgot size
Im 64 on the list. Please take me off. Thanks, uaskme
OK Simon: When is this mould going to get built. This thread and buy is over two years old. Bout time to make some chips on this one.
Need to move this along and if Miha sets his own schedule then maybe he forgot about this one. Time for a positive update.
Randy
"It's not how well you do what you know how to do,,,It's how well you do what you DON'T know how to do!"
www.buchananprecisionmachine.com
Randy,
Agreed... This one is getting long in the tooth. I'll PM Miha.
Simon
Wonder what will happen first, Powder is stocked on dealer shelves or the GB is closed and delivered? Which ever occurs first, I still won't get to shoot the .44 as one is no good without the other.
Oh patient ones...
Still no response from Miha. I hope he sends something by next week... Keep the faith.
Simon
No worries here Simon. Yeah this one's been going for a while, but I'm not going anywhere. I've got a slew of other .44 molds if I need 'em.
Thanks for sticking with this one.
Bob
No word yet from Miha but...
Thread updated - See Post #292, Page 15
Simon
I am # 53 on the list can you please remove the handles from my order please
Team,
I started this with a discussion on 11/22/11 (nearly three years ago). SFFAR opened the group buy in January of 2012. I sent a PM to Miha on 5/7 (with no response) asking if we could close this buy...
For me, this has taken too long. Other buys started after this one have been closed and shipped.
I've cancelled my request for the mold and am leaving this buy as the substitute Honcho. Hopefully, someone will pick up the reins as the Honcho and the buy will go on.
Best of luck!
Simon
Thanks for the update.
Thank you for your "tenure" Simon, it was nice of you to take this one over & I understand your frustration.
It's a shame this one died, but I guess it happens from time to time.
Bob
I'm #95 on this list and I am cancelling my request as well due to an unexpected surgery. Maybe a US mould maker could pick up this buy and we can leave our dollars in America. Could luck to you all!
I sent Miha an email asking for status on this, he typically responds pretty well when I have emailed him in the past. If I get a response I'll post it here. Never honcho'ed a buy but if he responds I'll attempt to take up the reins.
Last edited by lksmith; 05-19-2014 at 09:34 PM.
I will be happy to keep Simon's list of buyers up to date if that is what is needed. I really want this mold from Miha. All I have is a crappy undersized Lyman 2 cav and it is worthless.
Sure hope this one gets built. I can't believe that a large order like this would be ignored.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |