bcr,
The pins in Al's moulds are not reversible. They are a different system than Miha's moulds. I do believe that Al includes a set of flat "plug" pins with each RG mould so you can mix and match HP and FP within your own mould.
Doc
bcr,
The pins in Al's moulds are not reversible. They are a different system than Miha's moulds. I do believe that Al includes a set of flat "plug" pins with each RG mould so you can mix and match HP and FP within your own mould.
Doc
Need some input here. I read a post where someone expressed a concern that this weight bul...boolit may not feed properly in bolt rifles due to its weight(length).
I have two 358Win's.....one is a tang safety Ruger M77 carbine and the other is the newer Hawkeye Ruger.
Will the solid flat nose version of this bul......boolit feed correctly in these two rifles?
Chapped Lips
Seated and crimped in the crimp groove you should get a COL of 2.522"
I think the book said 2.78"
Check your rifles and see.
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Swede,
How wide is the front driving band (ahead of the crimp groove) in this mold. I need to check some fitment.
Thanks,
Rick
Checked list
Bump
RickinTN
The top band is .060" wide and .360" diameter
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Swede, what do you suggest for a 357max handi rifle? I'm new, haven't even cast my 1st book it yet.
Thanx
this is a dandy boolit for the 357max in an NEF handi rifle.
Put me in for a 2 boolit GC then. Thanx
I plan on using this bullet in about 4 different 35 caliber guns for deer hunting.
What is the benefit of shooting a hollow point bullet?
Thanks,
With Al's mold you can make it either way (RG2 or RG4), the idea of a hollow point is expansion in a quicker manner. But if you cast soft nose boolits it can expand plenty quickly.
Please add me in for a 4 cavity GC mould.
Thanks,
Doc
Put me down for a 2 cavity GC mold
Al,
Please put me in for a 2 cavity GC mold. When is payment due? Thank you!
Bob
SMOKELESS IS JUST A PASSING FAD!-STEVE GARBE
FORMER NJ HUNTER EDUCATION INSTRUCTOR
GOA LIFE MEMBER
SASS LIFE MEMBER
ADAPT, IMPROVISE, OVERCOME!
"ANY MAN WHO THINKS HE CAN BE HAPPY AND PROSPEROUS BY LETTING THE GOVERNMENT TAKE CARE OF HIM, BETTER TAKE A CLOSER LOOK AT THE AMERICAN INDIAN!"-HENRY FORD
Updated list
Bump
Buzzard II
Its on the schedule for March
But it is a moving target until we make a final call
Thanks for the orders
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Put me down for RG4 GC drilled for probe.
I'm in for a 3 holer GC.
"letter k" "letter j" howler at gee male dot comm.
Now to find gas checks.
I'm going to drop out of this one Swede. #8 on the list.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |