cant seem to fine the lee boolit sizing press. found the sizing die and the lube kit but not the sizing press. would it happen to be the same as the reloading press?
thanks for the help
big Sam
|
   
   
|
|
cant seem to fine the lee boolit sizing press. found the sizing die and the lube kit but not the sizing press. would it happen to be the same as the reloading press?
thanks for the help
big Sam
Yes it is.
Lee does not make a "sizing press". Their sizing dies are made to be used on any single station press.
Paul G.
Once I was young, now I am old and in between went by way to fast.
The end move in politics is always to pick up a gun.
-- R. Buckminster Fuller
Just get the small C frame press. Like the gent above says, the die is the same size as all their standard dies and threads right in. You will get a punch as well that sits on top of the ram and pops it up through the die. I have one myself and it works pretty good. I think I gave less than $25 for the press.Originally Posted by hothandle
Yup just get yourself a nice single stage or a cheap one if you want to leave it set up for sizing duties only
I use an old RCBS JR press mounted upside down for sizing. Works best for me.
45 AUTO! Because having to shoot someone twice is just silly!
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote